Filtered by vendor Fit2cloud
Subscriptions
Total
62 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-66507 | 3 1panel, Fit2cloud, Linux | 3 1panel, 1panel, Linux | 2025-12-10 | 7.5 High |
| 1Panel is an open-source, web-based control panel for Linux server management. Versions 2.0.13 and below allow an unauthenticated attacker to disable CAPTCHA verification by abusing a client-controlled parameter. Because the server previously trusted this value without proper validation, CAPTCHA protections can be bypassed, enabling automated login attempts and significantly increasing the risk of account takeover (ATO). This issue is fixed in version 2.0.14. | ||||
| CVE-2025-66508 | 2 1panel, Fit2cloud | 2 1panel, 1panel | 2025-12-10 | 6.5 Medium |
| 1Panel is an open-source, web-based control panel for Linux server management. Versions 2.0.14 and below use Gin's default configuration which trusts all IP addresses as proxies (TrustedProxies = 0.0.0.0/0), allowing any client to spoof the X-Forwarded-For header. Since all IP-based access controls (AllowIPs, API whitelists, localhost-only checks) rely on ClientIP(), attackers can bypass these protections by simply sending X-Forwarded-For: 127.0.0.1 or any whitelisted IP. This renders all IP-based security controls ineffective. This issue is fixed in version 2.0.14. | ||||
| CVE-2025-14117 | 1 Fit2cloud | 1 Halo | 2025-12-08 | 4.3 Medium |
| A vulnerability has been found in fit2cloud Halo 2.21.10. Impacted is an unknown function. The manipulation leads to cross-site request forgery. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-58044 | 2 Fit2cloud, Jumpserver | 2 Jumpserver, Jumpserver | 2025-12-05 | 6.1 Medium |
| JumpServer is an open source bastion host and an operation and maintenance security audit system. Prior to v3.10.19 and v4.10.5, The /core/i18n// endpoint uses the Referer header as the redirection target without proper validation, which could lead to an Open Redirect vulnerability. This vulnerability is fixed in v3.10.19 and v4.10.5. | ||||
| CVE-2025-56413 | 2 1panel, Fit2cloud | 2 1panel, 1panel | 2025-11-18 | 8.8 High |
| OS Command injection vulnerability in function OperateSSH in 1panel 2.0.8 allowing attackers to execute arbitrary commands via the operation parameter to the /api/v2/hosts/ssh/operate endpoint. | ||||
| CVE-2025-27095 | 2 Fit2cloud, Jumpserver | 2 Jumpserver, Jumpserver | 2025-11-12 | 4.3 Medium |
| JumpServer is an open source bastion host and an operation and maintenance security audit system. Prior to 4.8.0 and 3.10.18, an attacker with a low-privileged account can access the Kubernetes session feature and manipulate the kubeconfig file to redirect API requests to an external server controlled by the attacker. This allows the attacker to intercept and capture the Kubernetes cluster token. This can potentially allow unauthorized access to the cluster and compromise its security. This vulnerability is fixed in 4.8.0 and 3.10.18. | ||||
| CVE-2025-62795 | 2 Fit2cloud, Jumpserver | 2 Jumpserver, Jumpserver | 2025-11-12 | 7.1 High |
| JumpServer is an open source bastion host and an operation and maintenance security audit system. Prior to v3.10.21-lts and v4.10.12-lts, a low-privileged authenticated user can invoke LDAP configuration tests and start LDAP synchronization by sending crafted messages to the /ws/ldap/ WebSocket endpoint, bypassing authorization checks and potentially exposing LDAP credentials or causing unintended sync operations. This vulnerability is fixed in v3.10.21-lts and v4.10.12-lts. | ||||
| CVE-2025-62712 | 2 Fit2cloud, Jumpserver | 2 Jumpserver, Jumpserver | 2025-11-12 | 9.6 Critical |
| JumpServer is an open source bastion host and an operation and maintenance security audit system. In JumpServer versions prior to v3.10.20-lts and v4.10.11-lts, an authenticated, non-privileged user can retrieve connection tokens belonging to other users via the super-connection API endpoint (/api/v1/authentication/super-connection-token/). When accessed from a web browser, this endpoint returns connection tokens created by all users instead of restricting results to tokens owned by or authorized for the requester. An attacker who obtains these tokens can use them to initiate connections to managed assets on behalf of the original token owners, resulting in unauthorized access and privilege escalation across sensitive systems. This vulnerability is fixed in v3.10.20-lts and v4.10.11-lts. | ||||
| CVE-2025-54424 | 2 1panel, Fit2cloud | 2 1panel, 1panel | 2025-08-26 | 8.1 High |
| 1Panel is a web interface and MCP Server that manages websites, files, containers, databases, and LLMs on a Linux server. In versions 2.0.5 and below, the HTTPS protocol used for communication between the Core and Agent endpoints has incomplete certificate verification during certificate validation, leading to unauthorized interface access. Due to the presence of numerous command execution or high-privilege interfaces in 1Panel, this results in Remote Code Execution (RCE). This is fixed in version 2.0.6. The CVE has been translated from Simplified Chinese using GitHub Copilot. | ||||
| CVE-2024-24768 | 1 Fit2cloud | 1 1panel | 2025-06-17 | 6.5 Medium |
| 1Panel is an open source Linux server operation and maintenance management panel. The HTTPS cookie that comes with the panel does not have the Secure keyword, which may cause the cookie to be sent in plain text if accessed using HTTP. This issue has been patched in version 1.9.6. | ||||
| CVE-2023-50612 | 1 Fit2cloud | 1 Cloudexplorer Lite | 2025-06-03 | 7.8 High |
| Insecure Permissions vulnerability in fit2cloud Cloud Explorer Lite version 1.4.1, allow local attackers to escalate privileges and obtain sensitive information via the cloud accounts parameter. | ||||
| CVE-2023-43652 | 2 Fit2cloud, Jumpserver | 2 Jumpserver, Jumpserver | 2025-05-27 | 8.2 High |
| JumpServer is an open source bastion host. As an unauthenticated user, it is possible to authenticate to the core API with a username and an SSH public key without needing a password or the corresponding SSH private key. An SSH public key should be considered public knowledge and should not used as an authentication secret alone. JumpServer provides an API for the KoKo component to validate user private key logins. This API does not verify the source of requests and will generate a personal authentication token. Given that public keys can be easily leaked, an attacker can exploit the leaked public key and username to authenticate, subsequently gaining access to the current user's information and authorized actions. This issue has been addressed in versions 2.28.20 and 3.7.1. Users are advised to upgrade. There are no known workarounds for this vulnerability. | ||||
| CVE-2023-43650 | 2 Fit2cloud, Jumpserver | 2 Jumpserver, Jumpserver | 2025-04-21 | 8.2 High |
| JumpServer is an open source bastion host. The verification code for resetting user's password is vulnerable to brute-force attacks due to the absence of rate limiting. JumpServer provides a feature allowing users to reset forgotten passwords. Affected users are sent a 6-digit verification code, ranging from 000000 to 999999, to facilitate the password reset. Although the code is only available in 1 minute, this window potentially allows for up to 1,000,000 validation attempts. This issue has been addressed in versions 2.28.20 and 3.7.1. Users are advised to upgrade. There are no known workarounds for this vulnerability. | ||||
| CVE-2024-40629 | 2 Fit2cloud, Jumpserver | 2 Jumpserver, Jumpserver | 2025-03-25 | 10 Critical |
| JumpServer is an open-source Privileged Access Management (PAM) tool that provides DevOps and IT teams with on-demand and secure access to SSH, RDP, Kubernetes, Database and RemoteApp endpoints through a web browser. An attacker can exploit the Ansible playbook to write arbitrary files, leading to remote code execution (RCE) in the Celery container. The Celery container runs as root and has database access, allowing an attacker to steal all secrets for hosts, create a new JumpServer account with admin privileges, or manipulate the database in other ways. This issue has been patched in release versions 3.10.12 and 4.0.0. It is recommended to upgrade the safe versions. There are no known workarounds for this vulnerability. | ||||
| CVE-2024-40628 | 2 Fit2cloud, Jumpserver | 2 Jumpserver, Jumpserver | 2025-03-25 | 10 Critical |
| JumpServer is an open-source Privileged Access Management (PAM) tool that provides DevOps and IT teams with on-demand and secure access to SSH, RDP, Kubernetes, Database and RemoteApp endpoints through a web browser. An attacker can exploit the ansible playbook to read arbitrary files in the celery container, leading to sensitive information disclosure. The Celery container runs as root and has database access, allowing the attacker to steal all secrets for hosts, create a new JumpServer account with admin privileges, or manipulate the database in other ways. This issue has been addressed in release versions 3.10.12 and 4.0.0. It is recommended to upgrade the safe versions. There is no known workarounds for this vulnerability. | ||||
| CVE-2024-29202 | 1 Fit2cloud | 1 Jumpserver | 2025-03-25 | 10 Critical |
| JumpServer is an open source bastion host and an operation and maintenance security audit system. Attackers can exploit a Jinja2 template injection vulnerability in JumpServer's Ansible to execute arbitrary code within the Celery container. Since the Celery container runs with root privileges and has database access, attackers could steal sensitive information from all hosts or manipulate the database. This vulnerability is fixed in v3.10.7. | ||||
| CVE-2024-29201 | 1 Fit2cloud | 1 Jumpserver | 2025-03-25 | 10 Critical |
| JumpServer is an open source bastion host and an operation and maintenance security audit system. Attackers can bypass the input validation mechanism in JumpServer's Ansible to execute arbitrary code within the Celery container. Since the Celery container runs with root privileges and has database access, attackers could steal sensitive information from all hosts or manipulate the database. This vulnerability is fixed in v3.10.7. | ||||
| CVE-2023-46123 | 2 Fit2cloud, Jumpserver | 2 Jumpserver, Jumpserver | 2025-03-25 | 5.3 Medium |
| jumpserver is an open source bastion machine, professional operation and maintenance security audit system that complies with 4A specifications. A flaw in the Core API allows attackers to bypass password brute-force protections by spoofing arbitrary IP addresses. By exploiting this vulnerability, attackers can effectively make unlimited password attempts by altering their apparent IP address for each request. This vulnerability has been patched in version 3.8.0. | ||||
| CVE-2023-43651 | 2 Fit2cloud, Jumpserver | 2 Jumpserver, Jumpserver | 2025-03-25 | 8.6 High |
| JumpServer is an open source bastion host. An authenticated user can exploit a vulnerability in MongoDB sessions to execute arbitrary commands, leading to remote code execution. This vulnerability may further be leveraged to gain root privileges on the system. Through the WEB CLI interface provided by the koko component, a user logs into the authorized mongoDB database and exploits the MongoDB session to execute arbitrary commands. This vulnerability has been addressed in versions 2.28.20 and 3.7.1. Users are advised to upgrade. There are no known workarounds for this vulnerability. | ||||
| CVE-2023-42818 | 2 Fit2cloud, Jumpserver | 2 Jumpserver, Jumpserver | 2025-03-25 | 5.4 Medium |
| JumpServer is an open source bastion host. When users enable MFA and use a public key for authentication, the Koko SSH server does not verify the corresponding SSH private key. An attacker could exploit a vulnerability by utilizing a disclosed public key to attempt brute-force authentication against the SSH service This issue has been patched in versions 3.6.5 and 3.5.6. Users are advised to upgrade. There are no known workarounds for this issue. | ||||