Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
16215 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40326 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Define actions for the new time_deleg FATTR4 attributes NFSv4 clients won't send legitimate GETATTR requests for these new attributes because they are intended to be used only with CB_GETATTR and SETATTR. But NFSD has to do something besides crashing if it ever sees a GETATTR request that queries these attributes. RFC 8881 Section 18.7.3 states: > The server MUST return a value for each attribute that the client > requests if the attribute is supported by the server for the > target file system. If the server does not support a particular > attribute on the target file system, then it MUST NOT return the > attribute value and MUST NOT set the attribute bit in the result > bitmap. The server MUST return an error if it supports an > attribute on the target but cannot obtain its value. In that case, > no attribute values will be returned. Further, RFC 9754 Section 5 states: > These new attributes are invalid to be used with GETATTR, VERIFY, > and NVERIFY, and they can only be used with CB_GETATTR and SETATTR > by a client holding an appropriate delegation. Thus there does not appear to be a specific server response mandated by specification. Taking the guidance that querying these attributes via GETATTR is "invalid", NFSD will return nfserr_inval, failing the request entirely. | ||||
| CVE-2025-40316 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix device use-after-free on unbind A recent change fixed device reference leaks when looking up drm platform device driver data during bind() but failed to remove a partial fix which had been added by commit 80805b62ea5b ("drm/mediatek: Fix kobject put for component sub-drivers"). This results in a reference imbalance on component bind() failures and on unbind() which could lead to a user-after-free. Make sure to only drop the references after retrieving the driver data by effectively reverting the previous partial fix. Note that holding a reference to a device does not prevent its driver data from going away so there is no point in keeping the reference. | ||||
| CVE-2023-53769 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virt/coco/sev-guest: Double-buffer messages The encryption algorithms read and write directly to shared unencrypted memory, which may leak information as well as permit the host to tamper with the message integrity. Instead, copy whole messages in or out as needed before doing any computation on them. | ||||
| CVE-2023-53763 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Revert "f2fs: fix to do sanity check on extent cache correctly" syzbot reports a f2fs bug as below: UBSAN: array-index-out-of-bounds in fs/f2fs/f2fs.h:3275:19 index 1409 is out of range for type '__le32[923]' (aka 'unsigned int[923]') Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348 inline_data_addr fs/f2fs/f2fs.h:3275 [inline] __recover_inline_status fs/f2fs/inode.c:113 [inline] do_read_inode fs/f2fs/inode.c:480 [inline] f2fs_iget+0x4730/0x48b0 fs/f2fs/inode.c:604 f2fs_fill_super+0x640e/0x80c0 fs/f2fs/super.c:4601 mount_bdev+0x276/0x3b0 fs/super.c:1391 legacy_get_tree+0xef/0x190 fs/fs_context.c:611 vfs_get_tree+0x8c/0x270 fs/super.c:1519 do_new_mount+0x28f/0xae0 fs/namespace.c:3335 do_mount fs/namespace.c:3675 [inline] __do_sys_mount fs/namespace.c:3884 [inline] __se_sys_mount+0x2d9/0x3c0 fs/namespace.c:3861 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The issue was bisected to: commit d48a7b3a72f121655d95b5157c32c7d555e44c05 Author: Chao Yu <chao@kernel.org> Date: Mon Jan 9 03:49:20 2023 +0000 f2fs: fix to do sanity check on extent cache correctly The root cause is we applied both v1 and v2 of the patch, v2 is the right fix, so it needs to revert v1 in order to fix reported issue. v1: commit d48a7b3a72f1 ("f2fs: fix to do sanity check on extent cache correctly") https://lore.kernel.org/lkml/20230109034920.492914-1-chao@kernel.org/ v2: commit 269d11948100 ("f2fs: fix to do sanity check on extent cache correctly") https://lore.kernel.org/lkml/20230207134808.1827869-1-chao@kernel.org/ | ||||
| CVE-2025-40321 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix crash while sending Action Frames in standalone AP Mode Currently, whenever there is a need to transmit an Action frame, the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to firmware. The P2P interfaces were available when wpa_supplicant is managing the wlan interface. However, the P2P interfaces are not created/initialized when only hostapd is managing the wlan interface. And if hostapd receives an ANQP Query REQ Action frame even from an un-associated STA, the brcmfmac driver tries to use an uninitialized P2P vif pointer for sending the IOVAR to firmware. This NULL pointer dereferencing triggers a driver crash. [ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] [ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [...] [ 1417.075653] Call trace: [ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac] [ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac] [ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211] [ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211] [ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158 [ 1417.076302] genl_rcv_msg+0x220/0x2a0 [ 1417.076317] netlink_rcv_skb+0x68/0x140 [ 1417.076330] genl_rcv+0x40/0x60 [ 1417.076343] netlink_unicast+0x330/0x3b8 [ 1417.076357] netlink_sendmsg+0x19c/0x3f8 [ 1417.076370] __sock_sendmsg+0x64/0xc0 [ 1417.076391] ____sys_sendmsg+0x268/0x2a0 [ 1417.076408] ___sys_sendmsg+0xb8/0x118 [ 1417.076427] __sys_sendmsg+0x90/0xf8 [ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40 [ 1417.076465] invoke_syscall+0x50/0x120 [ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0 [ 1417.076506] do_el0_svc+0x24/0x38 [ 1417.076525] el0_svc+0x30/0x100 [ 1417.076548] el0t_64_sync_handler+0x100/0x130 [ 1417.076569] el0t_64_sync+0x190/0x198 [ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000) Fix this, by always using the vif corresponding to the wdev on which the Action frame Transmission request was initiated by the userspace. This way, even if P2P vif is not available, the IOVAR is sent to firmware on AP vif and the ANQP Query RESP Action frame is transmitted without crashing the driver. Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev() to brcmf_p2p_attach(). Because the former function would not get executed when only hostapd is managing wlan interface, and it is not safe to do reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior init_completion(). And in the brcmf_p2p_tx_action_frame() function, the condition check for P2P Presence response frame is not needed, since the wpa_supplicant is properly sending the P2P Presense Response frame on the P2P-GO vif instead of the P2P-Device vif. [Cc stable] | ||||
| CVE-2025-40309 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: Fix UAF on sco_conn_free BUG: KASAN: slab-use-after-free in sco_conn_free net/bluetooth/sco.c:87 [inline] BUG: KASAN: slab-use-after-free in kref_put include/linux/kref.h:65 [inline] BUG: KASAN: slab-use-after-free in sco_conn_put+0xdd/0x410 net/bluetooth/sco.c:107 Write of size 8 at addr ffff88811cb96b50 by task kworker/u17:4/352 CPU: 1 UID: 0 PID: 352 Comm: kworker/u17:4 Not tainted 6.17.0-rc5-g717368f83676 #4 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci13 hci_cmd_sync_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x10b/0x170 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x191/0x550 mm/kasan/report.c:482 kasan_report+0xc4/0x100 mm/kasan/report.c:595 sco_conn_free net/bluetooth/sco.c:87 [inline] kref_put include/linux/kref.h:65 [inline] sco_conn_put+0xdd/0x410 net/bluetooth/sco.c:107 sco_connect_cfm+0xb4/0xae0 net/bluetooth/sco.c:1441 hci_connect_cfm include/net/bluetooth/hci_core.h:2082 [inline] hci_conn_failed+0x20a/0x2e0 net/bluetooth/hci_conn.c:1313 hci_conn_unlink+0x55f/0x810 net/bluetooth/hci_conn.c:1121 hci_conn_del+0xb6/0x1110 net/bluetooth/hci_conn.c:1147 hci_abort_conn_sync+0x8c5/0xbb0 net/bluetooth/hci_sync.c:5689 hci_cmd_sync_work+0x281/0x380 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3236 [inline] process_scheduled_works+0x77e/0x1040 kernel/workqueue.c:3319 worker_thread+0xbee/0x1200 kernel/workqueue.c:3400 kthread+0x3c7/0x870 kernel/kthread.c:463 ret_from_fork+0x13a/0x1e0 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 31370: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x70 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:388 [inline] __kasan_kmalloc+0x82/0x90 mm/kasan/common.c:405 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4382 [inline] __kmalloc_noprof+0x22f/0x390 mm/slub.c:4394 kmalloc_noprof include/linux/slab.h:909 [inline] sk_prot_alloc+0xae/0x220 net/core/sock.c:2239 sk_alloc+0x34/0x5a0 net/core/sock.c:2295 bt_sock_alloc+0x3c/0x330 net/bluetooth/af_bluetooth.c:151 sco_sock_alloc net/bluetooth/sco.c:562 [inline] sco_sock_create+0xc0/0x350 net/bluetooth/sco.c:593 bt_sock_create+0x161/0x3b0 net/bluetooth/af_bluetooth.c:135 __sock_create+0x3ad/0x780 net/socket.c:1589 sock_create net/socket.c:1647 [inline] __sys_socket_create net/socket.c:1684 [inline] __sys_socket+0xd5/0x330 net/socket.c:1731 __do_sys_socket net/socket.c:1745 [inline] __se_sys_socket net/socket.c:1743 [inline] __x64_sys_socket+0x7a/0x90 net/socket.c:1743 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xc7/0x240 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 31374: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x70 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:243 [inline] __kasan_slab_free+0x3d/0x50 mm/kasan/common.c:275 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2428 [inline] slab_free mm/slub.c:4701 [inline] kfree+0x199/0x3b0 mm/slub.c:4900 sk_prot_free net/core/sock.c:2278 [inline] __sk_destruct+0x4aa/0x630 net/core/sock.c:2373 sco_sock_release+0x2ad/0x300 net/bluetooth/sco.c:1333 __sock_release net/socket.c:649 [inline] sock_close+0xb8/0x230 net/socket.c:1439 __fput+0x3d1/0x9e0 fs/file_table.c:468 task_work_run+0x206/0x2a0 kernel/task_work.c:227 get_signal+0x1201/0x1410 kernel/signal.c:2807 arch_do_signal_or_restart+0x34/0x740 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop+0x68/0xc0 kernel/entry/common.c:40 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline] s ---truncated--- | ||||
| CVE-2022-50630 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: hugetlb: fix UAF in hugetlb_handle_userfault The vma_lock and hugetlb_fault_mutex are dropped before handling userfault and reacquire them again after handle_userfault(), but reacquire the vma_lock could lead to UAF[1,2] due to the following race, hugetlb_fault hugetlb_no_page /*unlock vma_lock */ hugetlb_handle_userfault handle_userfault /* unlock mm->mmap_lock*/ vm_mmap_pgoff do_mmap mmap_region munmap_vma_range /* clean old vma */ /* lock vma_lock again <--- UAF */ /* unlock vma_lock */ Since the vma_lock will unlock immediately after hugetlb_handle_userfault(), let's drop the unneeded lock and unlock in hugetlb_handle_userfault() to fix the issue. [1] https://lore.kernel.org/linux-mm/000000000000d5e00a05e834962e@google.com/ [2] https://lore.kernel.org/linux-mm/20220921014457.1668-1-liuzixian4@huawei.com/ | ||||
| CVE-2025-40324 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix crash in nfsd4_read_release() When tracing is enabled, the trace_nfsd_read_done trace point crashes during the pynfs read.testNoFh test. | ||||
| CVE-2025-40315 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix epfile null pointer access after ep enable. A race condition occurs when ffs_func_eps_enable() runs concurrently with ffs_data_reset(). The ffs_data_clear() called in ffs_data_reset() sets ffs->epfiles to NULL before resetting ffs->eps_count to 0, leading to a NULL pointer dereference when accessing epfile->ep in ffs_func_eps_enable() after successful usb_ep_enable(). The ffs->epfiles pointer is set to NULL in both ffs_data_clear() and ffs_data_close() functions, and its modification is protected by the spinlock ffs->eps_lock. And the whole ffs_func_eps_enable() function is also protected by ffs->eps_lock. Thus, add NULL pointer handling for ffs->epfiles in the ffs_func_eps_enable() function to fix issues | ||||
| CVE-2023-53749 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86: fix clear_user_rep_good() exception handling annotation This code no longer exists in mainline, because it was removed in commit d2c95f9d6802 ("x86: don't use REP_GOOD or ERMS for user memory clearing") upstream. However, rather than backport the full range of x86 memory clearing and copying cleanups, fix the exception table annotation placement for the final 'rep movsb' in clear_user_rep_good(): rather than pointing at the actual instruction that did the user space access, it pointed to the register move just before it. That made sense from a code flow standpoint, but not from an actual usage standpoint: it means that if user access takes an exception, the exception handler won't actually find the instruction in the exception tables. As a result, rather than fixing it up and returning -EFAULT, it would then turn it into a kernel oops report instead, something like: BUG: unable to handle page fault for address: 0000000020081000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page ... RIP: 0010:clear_user_rep_good+0x1c/0x30 arch/x86/lib/clear_page_64.S:147 ... Call Trace: __clear_user arch/x86/include/asm/uaccess_64.h:103 [inline] clear_user arch/x86/include/asm/uaccess_64.h:124 [inline] iov_iter_zero+0x709/0x1290 lib/iov_iter.c:800 iomap_dio_hole_iter fs/iomap/direct-io.c:389 [inline] iomap_dio_iter fs/iomap/direct-io.c:440 [inline] __iomap_dio_rw+0xe3d/0x1cd0 fs/iomap/direct-io.c:601 iomap_dio_rw+0x40/0xa0 fs/iomap/direct-io.c:689 ext4_dio_read_iter fs/ext4/file.c:94 [inline] ext4_file_read_iter+0x4be/0x690 fs/ext4/file.c:145 call_read_iter include/linux/fs.h:2183 [inline] do_iter_readv_writev+0x2e0/0x3b0 fs/read_write.c:733 do_iter_read+0x2f2/0x750 fs/read_write.c:796 vfs_readv+0xe5/0x150 fs/read_write.c:916 do_preadv+0x1b6/0x270 fs/read_write.c:1008 __do_sys_preadv2 fs/read_write.c:1070 [inline] __se_sys_preadv2 fs/read_write.c:1061 [inline] __x64_sys_preadv2+0xef/0x150 fs/read_write.c:1061 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd which then looks like a filesystem bug rather than the incorrect exception annotation that it is. [ The alternative to this one-liner fix is to take the upstream series that cleans this all up: 68674f94ffc9 ("x86: don't use REP_GOOD or ERMS for small memory copies") 20f3337d350c ("x86: don't use REP_GOOD or ERMS for small memory clearing") adfcf4231b8c ("x86: don't use REP_GOOD or ERMS for user memory copies") * d2c95f9d6802 ("x86: don't use REP_GOOD or ERMS for user memory clearing") 3639a535587d ("x86: move stac/clac from user copy routines into callers") 577e6a7fd50d ("x86: inline the 'rep movs' in user copies for the FSRM case") 8c9b6a88b7e2 ("x86: improve on the non-rep 'clear_user' function") 427fda2c8a49 ("x86: improve on the non-rep 'copy_user' function") * e046fe5a36a9 ("x86: set FSRS automatically on AMD CPUs that have FSRM") e1f2750edc4a ("x86: remove 'zerorest' argument from __copy_user_nocache()") 034ff37d3407 ("x86: rewrite '__copy_user_nocache' function") with either the whole series or at a minimum the two marked commits being needed to fix this issue ] | ||||
| CVE-2023-53744 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: ti: pm33xx: Fix refcount leak in am33xx_pm_probe wkup_m3_ipc_get() takes refcount, which should be freed by wkup_m3_ipc_put(). Add missing refcount release in the error paths. | ||||
| CVE-2023-53742 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kcsan: Avoid READ_ONCE() in read_instrumented_memory() Haibo Li reported: | Unable to handle kernel paging request at virtual address | ffffff802a0d8d7171 | Mem abort info:o: | ESR = 0x9600002121 | EC = 0x25: DABT (current EL), IL = 32 bitsts | SET = 0, FnV = 0 0 | EA = 0, S1PTW = 0 0 | FSC = 0x21: alignment fault | Data abort info:o: | ISV = 0, ISS = 0x0000002121 | CM = 0, WnR = 0 0 | swapper pgtable: 4k pages, 39-bit VAs, pgdp=000000002835200000 | [ffffff802a0d8d71] pgd=180000005fbf9003, p4d=180000005fbf9003, | pud=180000005fbf9003, pmd=180000005fbe8003, pte=006800002a0d8707 | Internal error: Oops: 96000021 [#1] PREEMPT SMP | Modules linked in: | CPU: 2 PID: 45 Comm: kworker/u8:2 Not tainted | 5.15.78-android13-8-g63561175bbda-dirty #1 | ... | pc : kcsan_setup_watchpoint+0x26c/0x6bc | lr : kcsan_setup_watchpoint+0x88/0x6bc | sp : ffffffc00ab4b7f0 | x29: ffffffc00ab4b800 x28: ffffff80294fe588 x27: 0000000000000001 | x26: 0000000000000019 x25: 0000000000000001 x24: ffffff80294fdb80 | x23: 0000000000000000 x22: ffffffc00a70fb68 x21: ffffff802a0d8d71 | x20: 0000000000000002 x19: 0000000000000000 x18: ffffffc00a9bd060 | x17: 0000000000000001 x16: 0000000000000000 x15: ffffffc00a59f000 | x14: 0000000000000001 x13: 0000000000000000 x12: ffffffc00a70faa0 | x11: 00000000aaaaaaab x10: 0000000000000054 x9 : ffffffc00839adf8 | x8 : ffffffc009b4cf00 x7 : 0000000000000000 x6 : 0000000000000007 | x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffffffc00a70fb70 | x2 : 0005ff802a0d8d71 x1 : 0000000000000000 x0 : 0000000000000000 | Call trace: | kcsan_setup_watchpoint+0x26c/0x6bc | __tsan_read2+0x1f0/0x234 | inflate_fast+0x498/0x750 | zlib_inflate+0x1304/0x2384 | __gunzip+0x3a0/0x45c | gunzip+0x20/0x30 | unpack_to_rootfs+0x2a8/0x3fc | do_populate_rootfs+0xe8/0x11c | async_run_entry_fn+0x58/0x1bc | process_one_work+0x3ec/0x738 | worker_thread+0x4c4/0x838 | kthread+0x20c/0x258 | ret_from_fork+0x10/0x20 | Code: b8bfc2a8 2a0803f7 14000007 d503249f (78bfc2a8) ) | ---[ end trace 613a943cb0a572b6 ]----- The reason for this is that on certain arm64 configuration since e35123d83ee3 ("arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y"), READ_ONCE() may be promoted to a full atomic acquire instruction which cannot be used on unaligned addresses. Fix it by avoiding READ_ONCE() in read_instrumented_memory(), and simply forcing the compiler to do the required access by casting to the appropriate volatile type. In terms of generated code this currently only affects architectures that do not use the default READ_ONCE() implementation. The only downside is that we are not guaranteed atomicity of the access itself, although on most architectures a plain load up to machine word size should still be atomic (a fact the default READ_ONCE() still relies on itself). | ||||
| CVE-2022-50623 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fpga: prevent integer overflow in dfl_feature_ioctl_set_irq() The "hdr.count * sizeof(s32)" multiplication can overflow on 32 bit systems leading to memory corruption. Use array_size() to fix that. | ||||
| CVE-2022-50614 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: pci_endpoint_test: Fix pci_endpoint_test_{copy,write,read}() panic The dma_map_single() doesn't permit zero length mapping. It causes a follow panic. A panic was reported on arm64: [ 60.137988] ------------[ cut here ]------------ [ 60.142630] kernel BUG at kernel/dma/swiotlb.c:624! [ 60.147508] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 60.152992] Modules linked in: dw_hdmi_cec crct10dif_ce simple_bridge rcar_fdp1 vsp1 rcar_vin videobuf2_vmalloc rcar_csi2 v4l 2_mem2mem videobuf2_dma_contig videobuf2_memops pci_endpoint_test videobuf2_v4l2 videobuf2_common rcar_fcp v4l2_fwnode v4l2_asyn c videodev mc gpio_bd9571mwv max9611 pwm_rcar ccree at24 authenc libdes phy_rcar_gen3_usb3 usb_dmac display_connector pwm_bl [ 60.186252] CPU: 0 PID: 508 Comm: pcitest Not tainted 6.0.0-rc1rpci-dev+ #237 [ 60.193387] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT) [ 60.201302] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 60.208263] pc : swiotlb_tbl_map_single+0x2c0/0x590 [ 60.213149] lr : swiotlb_map+0x88/0x1f0 [ 60.216982] sp : ffff80000a883bc0 [ 60.220292] x29: ffff80000a883bc0 x28: 0000000000000000 x27: 0000000000000000 [ 60.227430] x26: 0000000000000000 x25: ffff0004c0da20d0 x24: ffff80000a1f77c0 [ 60.234567] x23: 0000000000000002 x22: 0001000040000010 x21: 000000007a000000 [ 60.241703] x20: 0000000000200000 x19: 0000000000000000 x18: 0000000000000000 [ 60.248840] x17: 0000000000000000 x16: 0000000000000000 x15: ffff0006ff7b9180 [ 60.255977] x14: ffff0006ff7b9180 x13: 0000000000000000 x12: 0000000000000000 [ 60.263113] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 60.270249] x8 : 0001000000000010 x7 : ffff0004c6754b20 x6 : 0000000000000000 [ 60.277385] x5 : ffff0004c0da2090 x4 : 0000000000000000 x3 : 0000000000000001 [ 60.284521] x2 : 0000000040000000 x1 : 0000000000000000 x0 : 0000000040000010 [ 60.291658] Call trace: [ 60.294100] swiotlb_tbl_map_single+0x2c0/0x590 [ 60.298629] swiotlb_map+0x88/0x1f0 [ 60.302115] dma_map_page_attrs+0x188/0x230 [ 60.306299] pci_endpoint_test_ioctl+0x5e4/0xd90 [pci_endpoint_test] [ 60.312660] __arm64_sys_ioctl+0xa8/0xf0 [ 60.316583] invoke_syscall+0x44/0x108 [ 60.320334] el0_svc_common.constprop.0+0xcc/0xf0 [ 60.325038] do_el0_svc+0x2c/0xb8 [ 60.328351] el0_svc+0x2c/0x88 [ 60.331406] el0t_64_sync_handler+0xb8/0xc0 [ 60.335587] el0t_64_sync+0x18c/0x190 [ 60.339251] Code: 52800013 d2e00414 35fff45c d503201f (d4210000) [ 60.345344] ---[ end trace 0000000000000000 ]--- To fix it, this patch adds a checking the payload length if it is zero. | ||||
| CVE-2025-40312 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: jfs: Verify inode mode when loading from disk The inode mode loaded from corrupted disk can be invalid. Do like what commit 0a9e74051313 ("isofs: Verify inode mode when loading from disk") does. | ||||
| CVE-2023-53757 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/irq-mvebu-gicp: Fix refcount leak in mvebu_gicp_probe of_irq_find_parent() returns a node pointer with refcount incremented, We should use of_node_put() on it when not needed anymore. Add missing of_node_put() to avoid refcount leak. | ||||
| CVE-2025-40320 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential cfid UAF in smb2_query_info_compound When smb2_query_info_compound() retries, a previously allocated cfid may have been freed in the first attempt. Because cfid wasn't reset on replay, later cleanup could act on a stale pointer, leading to a potential use-after-free. Reinitialize cfid to NULL under the replay label. Example trace (trimmed): refcount_t: underflow; use-after-free. WARNING: CPU: 1 PID: 11224 at ../lib/refcount.c:28 refcount_warn_saturate+0x9c/0x110 [...] RIP: 0010:refcount_warn_saturate+0x9c/0x110 [...] Call Trace: <TASK> smb2_query_info_compound+0x29c/0x5c0 [cifs f90b72658819bd21c94769b6a652029a07a7172f] ? step_into+0x10d/0x690 ? __legitimize_path+0x28/0x60 smb2_queryfs+0x6a/0xf0 [cifs f90b72658819bd21c94769b6a652029a07a7172f] smb311_queryfs+0x12d/0x140 [cifs f90b72658819bd21c94769b6a652029a07a7172f] ? kmem_cache_alloc+0x18a/0x340 ? getname_flags+0x46/0x1e0 cifs_statfs+0x9f/0x2b0 [cifs f90b72658819bd21c94769b6a652029a07a7172f] statfs_by_dentry+0x67/0x90 vfs_statfs+0x16/0xd0 user_statfs+0x54/0xa0 __do_sys_statfs+0x20/0x50 do_syscall_64+0x58/0x80 | ||||
| CVE-2025-40319 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Sync pending IRQ work before freeing ring buffer Fix a race where irq_work can be queued in bpf_ringbuf_commit() but the ring buffer is freed before the work executes. In the syzbot reproducer, a BPF program attached to sched_switch triggers bpf_ringbuf_commit(), queuing an irq_work. If the ring buffer is freed before this work executes, the irq_work thread may accesses freed memory. Calling `irq_work_sync(&rb->work)` ensures that all pending irq_work complete before freeing the buffer. | ||||
| CVE-2023-53755 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: ptdma: check for null desc before calling pt_cmd_callback Resolves a panic that can occur on AMD systems, typically during host shutdown, after the PTDMA driver had been exercised. The issue was the pt_issue_pending() function is mistakenly assuming that there will be at least one descriptor in the Submitted queue when the function is called. However, it is possible that both the Submitted and Issued queues could be empty, which could result in pt_cmd_callback() being mistakenly called with a NULL pointer. Ref: Bugzilla Bug 216856. | ||||
| CVE-2025-40317 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regmap: slimbus: fix bus_context pointer in regmap init calls Commit 4e65bda8273c ("ASoC: wcd934x: fix error handling in wcd934x_codec_parse_data()") revealed the problem in the slimbus regmap. That commit breaks audio playback, for instance, on sdm845 Thundercomm Dragonboard 845c board: Unable to handle kernel paging request at virtual address ffff8000847cbad4 ... CPU: 5 UID: 0 PID: 776 Comm: aplay Not tainted 6.18.0-rc1-00028-g7ea30958b305 #11 PREEMPT Hardware name: Thundercomm Dragonboard 845c (DT) ... Call trace: slim_xfer_msg+0x24/0x1ac [slimbus] (P) slim_read+0x48/0x74 [slimbus] regmap_slimbus_read+0x18/0x24 [regmap_slimbus] _regmap_raw_read+0xe8/0x174 _regmap_bus_read+0x44/0x80 _regmap_read+0x60/0xd8 _regmap_update_bits+0xf4/0x140 _regmap_select_page+0xa8/0x124 _regmap_raw_write_impl+0x3b8/0x65c _regmap_bus_raw_write+0x60/0x80 _regmap_write+0x58/0xc0 regmap_write+0x4c/0x80 wcd934x_hw_params+0x494/0x8b8 [snd_soc_wcd934x] snd_soc_dai_hw_params+0x3c/0x7c [snd_soc_core] __soc_pcm_hw_params+0x22c/0x634 [snd_soc_core] dpcm_be_dai_hw_params+0x1d4/0x38c [snd_soc_core] dpcm_fe_dai_hw_params+0x9c/0x17c [snd_soc_core] snd_pcm_hw_params+0x124/0x464 [snd_pcm] snd_pcm_common_ioctl+0x110c/0x1820 [snd_pcm] snd_pcm_ioctl+0x34/0x4c [snd_pcm] __arm64_sys_ioctl+0xac/0x104 invoke_syscall+0x48/0x104 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xec el0t_64_sync_handler+0xa0/0xf0 el0t_64_sync+0x198/0x19c The __devm_regmap_init_slimbus() started to be used instead of __regmap_init_slimbus() after the commit mentioned above and turns out the incorrect bus_context pointer (3rd argument) was used in __devm_regmap_init_slimbus(). It should be just "slimbus" (which is equal to &slimbus->dev). Correct it. The wcd934x codec seems to be the only or the first user of devm_regmap_init_slimbus() but we should fix it till the point where __devm_regmap_init_slimbus() was introduced therefore two "Fixes" tags. While at this, also correct the same argument in __regmap_init_slimbus(). | ||||