Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
16066 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40321 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix crash while sending Action Frames in standalone AP Mode Currently, whenever there is a need to transmit an Action frame, the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to firmware. The P2P interfaces were available when wpa_supplicant is managing the wlan interface. However, the P2P interfaces are not created/initialized when only hostapd is managing the wlan interface. And if hostapd receives an ANQP Query REQ Action frame even from an un-associated STA, the brcmfmac driver tries to use an uninitialized P2P vif pointer for sending the IOVAR to firmware. This NULL pointer dereferencing triggers a driver crash. [ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] [ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [...] [ 1417.075653] Call trace: [ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac] [ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac] [ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211] [ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211] [ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158 [ 1417.076302] genl_rcv_msg+0x220/0x2a0 [ 1417.076317] netlink_rcv_skb+0x68/0x140 [ 1417.076330] genl_rcv+0x40/0x60 [ 1417.076343] netlink_unicast+0x330/0x3b8 [ 1417.076357] netlink_sendmsg+0x19c/0x3f8 [ 1417.076370] __sock_sendmsg+0x64/0xc0 [ 1417.076391] ____sys_sendmsg+0x268/0x2a0 [ 1417.076408] ___sys_sendmsg+0xb8/0x118 [ 1417.076427] __sys_sendmsg+0x90/0xf8 [ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40 [ 1417.076465] invoke_syscall+0x50/0x120 [ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0 [ 1417.076506] do_el0_svc+0x24/0x38 [ 1417.076525] el0_svc+0x30/0x100 [ 1417.076548] el0t_64_sync_handler+0x100/0x130 [ 1417.076569] el0t_64_sync+0x190/0x198 [ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000) Fix this, by always using the vif corresponding to the wdev on which the Action frame Transmission request was initiated by the userspace. This way, even if P2P vif is not available, the IOVAR is sent to firmware on AP vif and the ANQP Query RESP Action frame is transmitted without crashing the driver. Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev() to brcmf_p2p_attach(). Because the former function would not get executed when only hostapd is managing wlan interface, and it is not safe to do reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior init_completion(). And in the brcmf_p2p_tx_action_frame() function, the condition check for P2P Presence response frame is not needed, since the wpa_supplicant is properly sending the P2P Presense Response frame on the P2P-GO vif instead of the P2P-Device vif. [Cc stable] | ||||
| CVE-2023-53749 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86: fix clear_user_rep_good() exception handling annotation This code no longer exists in mainline, because it was removed in commit d2c95f9d6802 ("x86: don't use REP_GOOD or ERMS for user memory clearing") upstream. However, rather than backport the full range of x86 memory clearing and copying cleanups, fix the exception table annotation placement for the final 'rep movsb' in clear_user_rep_good(): rather than pointing at the actual instruction that did the user space access, it pointed to the register move just before it. That made sense from a code flow standpoint, but not from an actual usage standpoint: it means that if user access takes an exception, the exception handler won't actually find the instruction in the exception tables. As a result, rather than fixing it up and returning -EFAULT, it would then turn it into a kernel oops report instead, something like: BUG: unable to handle page fault for address: 0000000020081000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page ... RIP: 0010:clear_user_rep_good+0x1c/0x30 arch/x86/lib/clear_page_64.S:147 ... Call Trace: __clear_user arch/x86/include/asm/uaccess_64.h:103 [inline] clear_user arch/x86/include/asm/uaccess_64.h:124 [inline] iov_iter_zero+0x709/0x1290 lib/iov_iter.c:800 iomap_dio_hole_iter fs/iomap/direct-io.c:389 [inline] iomap_dio_iter fs/iomap/direct-io.c:440 [inline] __iomap_dio_rw+0xe3d/0x1cd0 fs/iomap/direct-io.c:601 iomap_dio_rw+0x40/0xa0 fs/iomap/direct-io.c:689 ext4_dio_read_iter fs/ext4/file.c:94 [inline] ext4_file_read_iter+0x4be/0x690 fs/ext4/file.c:145 call_read_iter include/linux/fs.h:2183 [inline] do_iter_readv_writev+0x2e0/0x3b0 fs/read_write.c:733 do_iter_read+0x2f2/0x750 fs/read_write.c:796 vfs_readv+0xe5/0x150 fs/read_write.c:916 do_preadv+0x1b6/0x270 fs/read_write.c:1008 __do_sys_preadv2 fs/read_write.c:1070 [inline] __se_sys_preadv2 fs/read_write.c:1061 [inline] __x64_sys_preadv2+0xef/0x150 fs/read_write.c:1061 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd which then looks like a filesystem bug rather than the incorrect exception annotation that it is. [ The alternative to this one-liner fix is to take the upstream series that cleans this all up: 68674f94ffc9 ("x86: don't use REP_GOOD or ERMS for small memory copies") 20f3337d350c ("x86: don't use REP_GOOD or ERMS for small memory clearing") adfcf4231b8c ("x86: don't use REP_GOOD or ERMS for user memory copies") * d2c95f9d6802 ("x86: don't use REP_GOOD or ERMS for user memory clearing") 3639a535587d ("x86: move stac/clac from user copy routines into callers") 577e6a7fd50d ("x86: inline the 'rep movs' in user copies for the FSRM case") 8c9b6a88b7e2 ("x86: improve on the non-rep 'clear_user' function") 427fda2c8a49 ("x86: improve on the non-rep 'copy_user' function") * e046fe5a36a9 ("x86: set FSRS automatically on AMD CPUs that have FSRM") e1f2750edc4a ("x86: remove 'zerorest' argument from __copy_user_nocache()") 034ff37d3407 ("x86: rewrite '__copy_user_nocache' function") with either the whole series or at a minimum the two marked commits being needed to fix this issue ] | ||||
| CVE-2025-40308 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bcsp: receive data only if registered Currently, bcsp_recv() can be called even when the BCSP protocol has not been registered. This leads to a NULL pointer dereference, as shown in the following stack trace: KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] RIP: 0010:bcsp_recv+0x13d/0x1740 drivers/bluetooth/hci_bcsp.c:590 Call Trace: <TASK> hci_uart_tty_receive+0x194/0x220 drivers/bluetooth/hci_ldisc.c:627 tiocsti+0x23c/0x2c0 drivers/tty/tty_io.c:2290 tty_ioctl+0x626/0xde0 drivers/tty/tty_io.c:2706 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f To prevent this, ensure that the HCI_UART_REGISTERED flag is set before processing received data. If the protocol is not registered, return -EUNATCH. | ||||
| CVE-2023-53755 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: ptdma: check for null desc before calling pt_cmd_callback Resolves a panic that can occur on AMD systems, typically during host shutdown, after the PTDMA driver had been exercised. The issue was the pt_issue_pending() function is mistakenly assuming that there will be at least one descriptor in the Submitted queue when the function is called. However, it is possible that both the Submitted and Issued queues could be empty, which could result in pt_cmd_callback() being mistakenly called with a NULL pointer. Ref: Bugzilla Bug 216856. | ||||
| CVE-2023-53744 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: ti: pm33xx: Fix refcount leak in am33xx_pm_probe wkup_m3_ipc_get() takes refcount, which should be freed by wkup_m3_ipc_put(). Add missing refcount release in the error paths. | ||||
| CVE-2023-53751 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix potential use-after-free bugs in TCP_Server_Info::hostname TCP_Server_Info::hostname may be updated once or many times during reconnect, so protect its access outside reconnect path as well and then prevent any potential use-after-free bugs. | ||||
| CVE-2023-53742 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kcsan: Avoid READ_ONCE() in read_instrumented_memory() Haibo Li reported: | Unable to handle kernel paging request at virtual address | ffffff802a0d8d7171 | Mem abort info:o: | ESR = 0x9600002121 | EC = 0x25: DABT (current EL), IL = 32 bitsts | SET = 0, FnV = 0 0 | EA = 0, S1PTW = 0 0 | FSC = 0x21: alignment fault | Data abort info:o: | ISV = 0, ISS = 0x0000002121 | CM = 0, WnR = 0 0 | swapper pgtable: 4k pages, 39-bit VAs, pgdp=000000002835200000 | [ffffff802a0d8d71] pgd=180000005fbf9003, p4d=180000005fbf9003, | pud=180000005fbf9003, pmd=180000005fbe8003, pte=006800002a0d8707 | Internal error: Oops: 96000021 [#1] PREEMPT SMP | Modules linked in: | CPU: 2 PID: 45 Comm: kworker/u8:2 Not tainted | 5.15.78-android13-8-g63561175bbda-dirty #1 | ... | pc : kcsan_setup_watchpoint+0x26c/0x6bc | lr : kcsan_setup_watchpoint+0x88/0x6bc | sp : ffffffc00ab4b7f0 | x29: ffffffc00ab4b800 x28: ffffff80294fe588 x27: 0000000000000001 | x26: 0000000000000019 x25: 0000000000000001 x24: ffffff80294fdb80 | x23: 0000000000000000 x22: ffffffc00a70fb68 x21: ffffff802a0d8d71 | x20: 0000000000000002 x19: 0000000000000000 x18: ffffffc00a9bd060 | x17: 0000000000000001 x16: 0000000000000000 x15: ffffffc00a59f000 | x14: 0000000000000001 x13: 0000000000000000 x12: ffffffc00a70faa0 | x11: 00000000aaaaaaab x10: 0000000000000054 x9 : ffffffc00839adf8 | x8 : ffffffc009b4cf00 x7 : 0000000000000000 x6 : 0000000000000007 | x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffffffc00a70fb70 | x2 : 0005ff802a0d8d71 x1 : 0000000000000000 x0 : 0000000000000000 | Call trace: | kcsan_setup_watchpoint+0x26c/0x6bc | __tsan_read2+0x1f0/0x234 | inflate_fast+0x498/0x750 | zlib_inflate+0x1304/0x2384 | __gunzip+0x3a0/0x45c | gunzip+0x20/0x30 | unpack_to_rootfs+0x2a8/0x3fc | do_populate_rootfs+0xe8/0x11c | async_run_entry_fn+0x58/0x1bc | process_one_work+0x3ec/0x738 | worker_thread+0x4c4/0x838 | kthread+0x20c/0x258 | ret_from_fork+0x10/0x20 | Code: b8bfc2a8 2a0803f7 14000007 d503249f (78bfc2a8) ) | ---[ end trace 613a943cb0a572b6 ]----- The reason for this is that on certain arm64 configuration since e35123d83ee3 ("arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y"), READ_ONCE() may be promoted to a full atomic acquire instruction which cannot be used on unaligned addresses. Fix it by avoiding READ_ONCE() in read_instrumented_memory(), and simply forcing the compiler to do the required access by casting to the appropriate volatile type. In terms of generated code this currently only affects architectures that do not use the default READ_ONCE() implementation. The only downside is that we are not guaranteed atomicity of the access itself, although on most architectures a plain load up to machine word size should still be atomic (a fact the default READ_ONCE() still relies on itself). | ||||
| CVE-2022-50623 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fpga: prevent integer overflow in dfl_feature_ioctl_set_irq() The "hdr.count * sizeof(s32)" multiplication can overflow on 32 bit systems leading to memory corruption. Use array_size() to fix that. | ||||
| CVE-2025-40319 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Sync pending IRQ work before freeing ring buffer Fix a race where irq_work can be queued in bpf_ringbuf_commit() but the ring buffer is freed before the work executes. In the syzbot reproducer, a BPF program attached to sched_switch triggers bpf_ringbuf_commit(), queuing an irq_work. If the ring buffer is freed before this work executes, the irq_work thread may accesses freed memory. Calling `irq_work_sync(&rb->work)` ensures that all pending irq_work complete before freeing the buffer. | ||||
| CVE-2022-50614 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: pci_endpoint_test: Fix pci_endpoint_test_{copy,write,read}() panic The dma_map_single() doesn't permit zero length mapping. It causes a follow panic. A panic was reported on arm64: [ 60.137988] ------------[ cut here ]------------ [ 60.142630] kernel BUG at kernel/dma/swiotlb.c:624! [ 60.147508] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 60.152992] Modules linked in: dw_hdmi_cec crct10dif_ce simple_bridge rcar_fdp1 vsp1 rcar_vin videobuf2_vmalloc rcar_csi2 v4l 2_mem2mem videobuf2_dma_contig videobuf2_memops pci_endpoint_test videobuf2_v4l2 videobuf2_common rcar_fcp v4l2_fwnode v4l2_asyn c videodev mc gpio_bd9571mwv max9611 pwm_rcar ccree at24 authenc libdes phy_rcar_gen3_usb3 usb_dmac display_connector pwm_bl [ 60.186252] CPU: 0 PID: 508 Comm: pcitest Not tainted 6.0.0-rc1rpci-dev+ #237 [ 60.193387] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT) [ 60.201302] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 60.208263] pc : swiotlb_tbl_map_single+0x2c0/0x590 [ 60.213149] lr : swiotlb_map+0x88/0x1f0 [ 60.216982] sp : ffff80000a883bc0 [ 60.220292] x29: ffff80000a883bc0 x28: 0000000000000000 x27: 0000000000000000 [ 60.227430] x26: 0000000000000000 x25: ffff0004c0da20d0 x24: ffff80000a1f77c0 [ 60.234567] x23: 0000000000000002 x22: 0001000040000010 x21: 000000007a000000 [ 60.241703] x20: 0000000000200000 x19: 0000000000000000 x18: 0000000000000000 [ 60.248840] x17: 0000000000000000 x16: 0000000000000000 x15: ffff0006ff7b9180 [ 60.255977] x14: ffff0006ff7b9180 x13: 0000000000000000 x12: 0000000000000000 [ 60.263113] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 60.270249] x8 : 0001000000000010 x7 : ffff0004c6754b20 x6 : 0000000000000000 [ 60.277385] x5 : ffff0004c0da2090 x4 : 0000000000000000 x3 : 0000000000000001 [ 60.284521] x2 : 0000000040000000 x1 : 0000000000000000 x0 : 0000000040000010 [ 60.291658] Call trace: [ 60.294100] swiotlb_tbl_map_single+0x2c0/0x590 [ 60.298629] swiotlb_map+0x88/0x1f0 [ 60.302115] dma_map_page_attrs+0x188/0x230 [ 60.306299] pci_endpoint_test_ioctl+0x5e4/0xd90 [pci_endpoint_test] [ 60.312660] __arm64_sys_ioctl+0xa8/0xf0 [ 60.316583] invoke_syscall+0x44/0x108 [ 60.320334] el0_svc_common.constprop.0+0xcc/0xf0 [ 60.325038] do_el0_svc+0x2c/0xb8 [ 60.328351] el0_svc+0x2c/0x88 [ 60.331406] el0t_64_sync_handler+0xb8/0xc0 [ 60.335587] el0t_64_sync+0x18c/0x190 [ 60.339251] Code: 52800013 d2e00414 35fff45c d503201f (d4210000) [ 60.345344] ---[ end trace 0000000000000000 ]--- To fix it, this patch adds a checking the payload length if it is zero. | ||||
| CVE-2025-40316 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix device use-after-free on unbind A recent change fixed device reference leaks when looking up drm platform device driver data during bind() but failed to remove a partial fix which had been added by commit 80805b62ea5b ("drm/mediatek: Fix kobject put for component sub-drivers"). This results in a reference imbalance on component bind() failures and on unbind() which could lead to a user-after-free. Make sure to only drop the references after retrieving the driver data by effectively reverting the previous partial fix. Note that holding a reference to a device does not prevent its driver data from going away so there is no point in keeping the reference. | ||||
| CVE-2022-50615 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix reference count leak in snr_uncore_mmio_map() pci_get_device() will increase the reference count for the returned pci_dev, so snr_uncore_get_mc_dev() will return a pci_dev with its reference count increased. We need to call pci_dev_put() to decrease the reference count. Let's add the missing pci_dev_put(). | ||||
| CVE-2023-53760 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: mcq: Fix &hwq->cq_lock deadlock issue When ufshcd_err_handler() is executed, CQ event interrupt can enter waiting for the same lock. This can happen in ufshcd_handle_mcq_cq_events() and also in ufs_mtk_mcq_intr(). The following warning message will be generated when &hwq->cq_lock is used in IRQ context with IRQ enabled. Use ufshcd_mcq_poll_cqe_lock() with spin_lock_irqsave instead of spin_lock to resolve the deadlock issue. [name:lockdep&]WARNING: inconsistent lock state [name:lockdep&]-------------------------------- [name:lockdep&]inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [name:lockdep&]kworker/u16:4/260 [HC0[0]:SC0[0]:HE1:SE1] takes: ffffff8028444600 (&hwq->cq_lock){?.-.}-{2:2}, at: ufshcd_mcq_poll_cqe_lock+0x30/0xe0 [name:lockdep&]{IN-HARDIRQ-W} state was registered at: lock_acquire+0x17c/0x33c _raw_spin_lock+0x5c/0x7c ufshcd_mcq_poll_cqe_lock+0x30/0xe0 ufs_mtk_mcq_intr+0x60/0x1bc [ufs_mediatek_mod] __handle_irq_event_percpu+0x140/0x3ec handle_irq_event+0x50/0xd8 handle_fasteoi_irq+0x148/0x2b0 generic_handle_domain_irq+0x4c/0x6c gic_handle_irq+0x58/0x134 call_on_irq_stack+0x40/0x74 do_interrupt_handler+0x84/0xe4 el1_interrupt+0x3c/0x78 <snip> Possible unsafe locking scenario: CPU0 ---- lock(&hwq->cq_lock); <Interrupt> lock(&hwq->cq_lock); *** DEADLOCK *** 2 locks held by kworker/u16:4/260: [name:lockdep&] stack backtrace: CPU: 7 PID: 260 Comm: kworker/u16:4 Tainted: G S W OE 6.1.17-mainline-android14-2-g277223301adb #1 Workqueue: ufs_eh_wq_0 ufshcd_err_handler Call trace: dump_backtrace+0x10c/0x160 show_stack+0x20/0x30 dump_stack_lvl+0x98/0xd8 dump_stack+0x20/0x60 print_usage_bug+0x584/0x76c mark_lock_irq+0x488/0x510 mark_lock+0x1ec/0x25c __lock_acquire+0x4d8/0xffc lock_acquire+0x17c/0x33c _raw_spin_lock+0x5c/0x7c ufshcd_mcq_poll_cqe_lock+0x30/0xe0 ufshcd_poll+0x68/0x1b0 ufshcd_transfer_req_compl+0x9c/0xc8 ufshcd_err_handler+0x3bc/0xea0 process_one_work+0x2f4/0x7e8 worker_thread+0x234/0x450 kthread+0x110/0x134 ret_from_fork+0x10/0x20 | ||||
| CVE-2022-50630 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: hugetlb: fix UAF in hugetlb_handle_userfault The vma_lock and hugetlb_fault_mutex are dropped before handling userfault and reacquire them again after handle_userfault(), but reacquire the vma_lock could lead to UAF[1,2] due to the following race, hugetlb_fault hugetlb_no_page /*unlock vma_lock */ hugetlb_handle_userfault handle_userfault /* unlock mm->mmap_lock*/ vm_mmap_pgoff do_mmap mmap_region munmap_vma_range /* clean old vma */ /* lock vma_lock again <--- UAF */ /* unlock vma_lock */ Since the vma_lock will unlock immediately after hugetlb_handle_userfault(), let's drop the unneeded lock and unlock in hugetlb_handle_userfault() to fix the issue. [1] https://lore.kernel.org/linux-mm/000000000000d5e00a05e834962e@google.com/ [2] https://lore.kernel.org/linux-mm/20220921014457.1668-1-liuzixian4@huawei.com/ | ||||
| CVE-2022-50628 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/gud: Fix UBSAN warning UBSAN complains about invalid value for bool: [ 101.165172] [drm] Initialized gud 1.0.0 20200422 for 2-3.2:1.0 on minor 1 [ 101.213360] gud 2-3.2:1.0: [drm] fb1: guddrmfb frame buffer device [ 101.213426] usbcore: registered new interface driver gud [ 101.989431] ================================================================================ [ 101.989441] UBSAN: invalid-load in linux/include/linux/iosys-map.h:253:9 [ 101.989447] load of value 121 is not a valid value for type '_Bool' [ 101.989451] CPU: 1 PID: 455 Comm: kworker/1:6 Not tainted 5.18.0-rc5-gud-5.18-rc5 #3 [ 101.989456] Hardware name: Hewlett-Packard HP EliteBook 820 G1/1991, BIOS L71 Ver. 01.44 04/12/2018 [ 101.989459] Workqueue: events_long gud_flush_work [gud] [ 101.989471] Call Trace: [ 101.989474] <TASK> [ 101.989479] dump_stack_lvl+0x49/0x5f [ 101.989488] dump_stack+0x10/0x12 [ 101.989493] ubsan_epilogue+0x9/0x3b [ 101.989498] __ubsan_handle_load_invalid_value.cold+0x44/0x49 [ 101.989504] dma_buf_vmap.cold+0x38/0x3d [ 101.989511] ? find_busiest_group+0x48/0x300 [ 101.989520] drm_gem_shmem_vmap+0x76/0x1b0 [drm_shmem_helper] [ 101.989528] drm_gem_shmem_object_vmap+0x9/0xb [drm_shmem_helper] [ 101.989535] drm_gem_vmap+0x26/0x60 [drm] [ 101.989594] drm_gem_fb_vmap+0x47/0x150 [drm_kms_helper] [ 101.989630] gud_prep_flush+0xc1/0x710 [gud] [ 101.989639] ? _raw_spin_lock+0x17/0x40 [ 101.989648] gud_flush_work+0x1e0/0x430 [gud] [ 101.989653] ? __switch_to+0x11d/0x470 [ 101.989664] process_one_work+0x21f/0x3f0 [ 101.989673] worker_thread+0x200/0x3e0 [ 101.989679] ? rescuer_thread+0x390/0x390 [ 101.989684] kthread+0xfd/0x130 [ 101.989690] ? kthread_complete_and_exit+0x20/0x20 [ 101.989696] ret_from_fork+0x22/0x30 [ 101.989706] </TASK> [ 101.989708] ================================================================================ The source of this warning is in iosys_map_clear() called from dma_buf_vmap(). It conditionally sets values based on map->is_iomem. The iosys_map variables are allocated uninitialized on the stack leading to ->is_iomem having all kinds of values and not only 0/1. Fix this by zeroing the iosys_map variables. | ||||
| CVE-2025-40305 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: 9p/trans_fd: p9_fd_request: kick rx thread if EPOLLIN p9_read_work() doesn't set Rworksched and doesn't do schedule_work(m->rq) if list_empty(&m->req_list). However, if the pipe is full, we need to read more data and this used to work prior to commit aaec5a95d59615 ("pipe_read: don't wake up the writer if the pipe is still full"). p9_read_work() does p9_fd_read() -> ... -> anon_pipe_read() which (before the commit above) triggered the unnecessary wakeup. This wakeup calls p9_pollwake() which kicks p9_poll_workfn() -> p9_poll_mux(), p9_poll_mux() will notice EPOLLIN and schedule_work(&m->rq). This no longer happens after the optimization above, change p9_fd_request() to use p9_poll_mux() instead of only checking for EPOLLOUT. | ||||
| CVE-2025-40315 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix epfile null pointer access after ep enable. A race condition occurs when ffs_func_eps_enable() runs concurrently with ffs_data_reset(). The ffs_data_clear() called in ffs_data_reset() sets ffs->epfiles to NULL before resetting ffs->eps_count to 0, leading to a NULL pointer dereference when accessing epfile->ep in ffs_func_eps_enable() after successful usb_ep_enable(). The ffs->epfiles pointer is set to NULL in both ffs_data_clear() and ffs_data_close() functions, and its modification is protected by the spinlock ffs->eps_lock. And the whole ffs_func_eps_enable() function is also protected by ffs->eps_lock. Thus, add NULL pointer handling for ffs->epfiles in the ffs_func_eps_enable() function to fix issues | ||||
| CVE-2023-53763 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Revert "f2fs: fix to do sanity check on extent cache correctly" syzbot reports a f2fs bug as below: UBSAN: array-index-out-of-bounds in fs/f2fs/f2fs.h:3275:19 index 1409 is out of range for type '__le32[923]' (aka 'unsigned int[923]') Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348 inline_data_addr fs/f2fs/f2fs.h:3275 [inline] __recover_inline_status fs/f2fs/inode.c:113 [inline] do_read_inode fs/f2fs/inode.c:480 [inline] f2fs_iget+0x4730/0x48b0 fs/f2fs/inode.c:604 f2fs_fill_super+0x640e/0x80c0 fs/f2fs/super.c:4601 mount_bdev+0x276/0x3b0 fs/super.c:1391 legacy_get_tree+0xef/0x190 fs/fs_context.c:611 vfs_get_tree+0x8c/0x270 fs/super.c:1519 do_new_mount+0x28f/0xae0 fs/namespace.c:3335 do_mount fs/namespace.c:3675 [inline] __do_sys_mount fs/namespace.c:3884 [inline] __se_sys_mount+0x2d9/0x3c0 fs/namespace.c:3861 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The issue was bisected to: commit d48a7b3a72f121655d95b5157c32c7d555e44c05 Author: Chao Yu <chao@kernel.org> Date: Mon Jan 9 03:49:20 2023 +0000 f2fs: fix to do sanity check on extent cache correctly The root cause is we applied both v1 and v2 of the patch, v2 is the right fix, so it needs to revert v1 in order to fix reported issue. v1: commit d48a7b3a72f1 ("f2fs: fix to do sanity check on extent cache correctly") https://lore.kernel.org/lkml/20230109034920.492914-1-chao@kernel.org/ v2: commit 269d11948100 ("f2fs: fix to do sanity check on extent cache correctly") https://lore.kernel.org/lkml/20230207134808.1827869-1-chao@kernel.org/ | ||||
| CVE-2023-53743 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: Free released resource after coalescing release_resource() doesn't actually free the resource or resource list entry so free the resource list entry to avoid a leak. | ||||
| CVE-2023-53758 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: atmel-quadspi: Free resources even if runtime resume failed in .remove() An early error exit in atmel_qspi_remove() doesn't prevent the device unbind. So this results in an spi controller with an unbound parent and unmapped register space (because devm_ioremap_resource() is undone). So using the remaining spi controller probably results in an oops. Instead unregister the controller unconditionally and only skip hardware access and clk disable. Also add a warning about resume failing and return zero unconditionally. The latter has the only effect to suppress a less helpful error message by the spi core. | ||||