Filtered by vendor Redhat
Subscriptions
Filtered by product Enterprise Linux
Subscriptions
Total
15525 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-43882 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: exec: Fix ToCToU between perm check and set-uid/gid usage When opening a file for exec via do_filp_open(), permission checking is done against the file's metadata at that moment, and on success, a file pointer is passed back. Much later in the execve() code path, the file metadata (specifically mode, uid, and gid) is used to determine if/how to set the uid and gid. However, those values may have changed since the permissions check, meaning the execution may gain unintended privileges. For example, if a file could change permissions from executable and not set-id: ---------x 1 root root 16048 Aug 7 13:16 target to set-id and non-executable: ---S------ 1 root root 16048 Aug 7 13:16 target it is possible to gain root privileges when execution should have been disallowed. While this race condition is rare in real-world scenarios, it has been observed (and proven exploitable) when package managers are updating the setuid bits of installed programs. Such files start with being world-executable but then are adjusted to be group-exec with a set-uid bit. For example, "chmod o-x,u+s target" makes "target" executable only by uid "root" and gid "cdrom", while also becoming setuid-root: -rwxr-xr-x 1 root cdrom 16048 Aug 7 13:16 target becomes: -rwsr-xr-- 1 root cdrom 16048 Aug 7 13:16 target But racing the chmod means users without group "cdrom" membership can get the permission to execute "target" just before the chmod, and when the chmod finishes, the exec reaches brpm_fill_uid(), and performs the setuid to root, violating the expressed authorization of "only cdrom group members can setuid to root". Re-check that we still have execute permissions in case the metadata has changed. It would be better to keep a copy from the perm-check time, but until we can do that refactoring, the least-bad option is to do a full inode_permission() call (under inode lock). It is understood that this is safe against dead-locks, but hardly optimal. | ||||
| CVE-2024-43880 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_erp: Fix object nesting warning ACLs in Spectrum-2 and newer ASICs can reside in the algorithmic TCAM (A-TCAM) or in the ordinary circuit TCAM (C-TCAM). The former can contain more ACLs (i.e., tc filters), but the number of masks in each region (i.e., tc chain) is limited. In order to mitigate the effects of the above limitation, the device allows filters to share a single mask if their masks only differ in up to 8 consecutive bits. For example, dst_ip/25 can be represented using dst_ip/24 with a delta of 1 bit. The C-TCAM does not have a limit on the number of masks being used (and therefore does not support mask aggregation), but can contain a limited number of filters. The driver uses the "objagg" library to perform the mask aggregation by passing it objects that consist of the filter's mask and whether the filter is to be inserted into the A-TCAM or the C-TCAM since filters in different TCAMs cannot share a mask. The set of created objects is dependent on the insertion order of the filters and is not necessarily optimal. Therefore, the driver will periodically ask the library to compute a more optimal set ("hints") by looking at all the existing objects. When the library asks the driver whether two objects can be aggregated the driver only compares the provided masks and ignores the A-TCAM / C-TCAM indication. This is the right thing to do since the goal is to move as many filters as possible to the A-TCAM. The driver also forbids two identical masks from being aggregated since this can only happen if one was intentionally put in the C-TCAM to avoid a conflict in the A-TCAM. The above can result in the following set of hints: H1: {mask X, A-TCAM} -> H2: {mask Y, A-TCAM} // X is Y + delta H3: {mask Y, C-TCAM} -> H4: {mask Z, A-TCAM} // Y is Z + delta After getting the hints from the library the driver will start migrating filters from one region to another while consulting the computed hints and instructing the device to perform a lookup in both regions during the transition. Assuming a filter with mask X is being migrated into the A-TCAM in the new region, the hints lookup will return H1. Since H2 is the parent of H1, the library will try to find the object associated with it and create it if necessary in which case another hints lookup (recursive) will be performed. This hints lookup for {mask Y, A-TCAM} will either return H2 or H3 since the driver passes the library an object comparison function that ignores the A-TCAM / C-TCAM indication. This can eventually lead to nested objects which are not supported by the library [1]. Fix by removing the object comparison function from both the driver and the library as the driver was the only user. That way the lookup will only return exact matches. I do not have a reliable reproducer that can reproduce the issue in a timely manner, but before the fix the issue would reproduce in several minutes and with the fix it does not reproduce in over an hour. Note that the current usefulness of the hints is limited because they include the C-TCAM indication and represent aggregation that cannot actually happen. This will be addressed in net-next. [1] WARNING: CPU: 0 PID: 153 at lib/objagg.c:170 objagg_obj_parent_assign+0xb5/0xd0 Modules linked in: CPU: 0 PID: 153 Comm: kworker/0:18 Not tainted 6.9.0-rc6-custom-g70fbc2c1c38b #42 Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:objagg_obj_parent_assign+0xb5/0xd0 [...] Call Trace: <TASK> __objagg_obj_get+0x2bb/0x580 objagg_obj_get+0xe/0x80 mlxsw_sp_acl_erp_mask_get+0xb5/0xf0 mlxsw_sp_acl_atcam_entry_add+0xe8/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270 mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510 process_one_work+0x151/0x370 | ||||
| CVE-2024-43879 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: handle 2x996 RU allocation in cfg80211_calculate_bitrate_he() Currently NL80211_RATE_INFO_HE_RU_ALLOC_2x996 is not handled in cfg80211_calculate_bitrate_he(), leading to below warning: kernel: invalid HE MCS: bw:6, ru:6 kernel: WARNING: CPU: 0 PID: 2312 at net/wireless/util.c:1501 cfg80211_calculate_bitrate_he+0x22b/0x270 [cfg80211] Fix it by handling 2x996 RU allocation in the same way as 160 MHz bandwidth. | ||||
| CVE-2024-43873 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost/vsock: always initialize seqpacket_allow There are two issues around seqpacket_allow: 1. seqpacket_allow is not initialized when socket is created. Thus if features are never set, it will be read uninitialized. 2. if VIRTIO_VSOCK_F_SEQPACKET is set and then cleared, then seqpacket_allow will not be cleared appropriately (existing apps I know about don't usually do this but it's legal and there's no way to be sure no one relies on this). To fix: - initialize seqpacket_allow after allocation - set it unconditionally in set_features | ||||
| CVE-2024-43871 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: devres: Fix memory leakage caused by driver API devm_free_percpu() It will cause memory leakage when use driver API devm_free_percpu() to free memory allocated by devm_alloc_percpu(), fixed by using devres_release() instead of devres_destroy() within devm_free_percpu(). | ||||
| CVE-2024-43870 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf: Fix event leak upon exit When a task is scheduled out, pending sigtrap deliveries are deferred to the target task upon resume to userspace via task_work. However failures while adding an event's callback to the task_work engine are ignored. And since the last call for events exit happen after task work is eventually closed, there is a small window during which pending sigtrap can be queued though ignored, leaking the event refcount addition such as in the following scenario: TASK A ----- do_exit() exit_task_work(tsk); <IRQ> perf_event_overflow() event->pending_sigtrap = pending_id; irq_work_queue(&event->pending_irq); </IRQ> =========> PREEMPTION: TASK A -> TASK B event_sched_out() event->pending_sigtrap = 0; atomic_long_inc_not_zero(&event->refcount) // FAILS: task work has exited task_work_add(&event->pending_task) [...] <IRQ WORK> perf_pending_irq() // early return: event->oncpu = -1 </IRQ WORK> [...] =========> TASK B -> TASK A perf_event_exit_task(tsk) perf_event_exit_event() free_event() WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1) // leak event due to unexpected refcount == 2 As a result the event is never released while the task exits. Fix this with appropriate task_work_add()'s error handling. | ||||
| CVE-2024-43869 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf: Fix event leak upon exec and file release The perf pending task work is never waited upon the matching event release. In the case of a child event, released via free_event() directly, this can potentially result in a leaked event, such as in the following scenario that doesn't even require a weak IRQ work implementation to trigger: schedule() prepare_task_switch() =======> <NMI> perf_event_overflow() event->pending_sigtrap = ... irq_work_queue(&event->pending_irq) <======= </NMI> perf_event_task_sched_out() event_sched_out() event->pending_sigtrap = 0; atomic_long_inc_not_zero(&event->refcount) task_work_add(&event->pending_task) finish_lock_switch() =======> <IRQ> perf_pending_irq() //do nothing, rely on pending task work <======= </IRQ> begin_new_exec() perf_event_exit_task() perf_event_exit_event() // If is child event free_event() WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1) // event is leaked Similar scenarios can also happen with perf_event_remove_on_exec() or simply against concurrent perf_event_release(). Fix this with synchonizing against the possibly remaining pending task work while freeing the event, just like is done with remaining pending IRQ work. This means that the pending task callback neither need nor should hold a reference to the event, preventing it from ever beeing freed. | ||||
| CVE-2024-43866 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Always drain health in shutdown callback There is no point in recovery during device shutdown. if health work started need to wait for it to avoid races and NULL pointer access. Hence, drain health WQ on shutdown callback. | ||||
| CVE-2024-43856 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dma: fix call order in dmam_free_coherent dmam_free_coherent() frees a DMA allocation, which makes the freed vaddr available for reuse, then calls devres_destroy() to remove and free the data structure used to track the DMA allocation. Between the two calls, it is possible for a concurrent task to make an allocation with the same vaddr and add it to the devres list. If this happens, there will be two entries in the devres list with the same vaddr and devres_destroy() can free the wrong entry, triggering the WARN_ON() in dmam_match. Fix by destroying the devres entry before freeing the DMA allocation. kokonut //net/encryption http://sponge2/b9145fe6-0f72-4325-ac2f-a84d81075b03 | ||||
| CVE-2024-43855 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md: fix deadlock between mddev_suspend and flush bio Deadlock occurs when mddev is being suspended while some flush bio is in progress. It is a complex issue. T1. the first flush is at the ending stage, it clears 'mddev->flush_bio' and tries to submit data, but is blocked because mddev is suspended by T4. T2. the second flush sets 'mddev->flush_bio', and attempts to queue md_submit_flush_data(), which is already running (T1) and won't execute again if on the same CPU as T1. T3. the third flush inc active_io and tries to flush, but is blocked because 'mddev->flush_bio' is not NULL (set by T2). T4. mddev_suspend() is called and waits for active_io dec to 0 which is inc by T3. T1 T2 T3 T4 (flush 1) (flush 2) (third 3) (suspend) md_submit_flush_data mddev->flush_bio = NULL; . . md_flush_request . mddev->flush_bio = bio . queue submit_flushes . . . . md_handle_request . . active_io + 1 . . md_flush_request . . wait !mddev->flush_bio . . . . mddev_suspend . . wait !active_io . . . submit_flushes . queue_work md_submit_flush_data . //md_submit_flush_data is already running (T1) . md_handle_request wait resume The root issue is non-atomic inc/dec of active_io during flush process. active_io is dec before md_submit_flush_data is queued, and inc soon after md_submit_flush_data() run. md_flush_request active_io + 1 submit_flushes active_io - 1 md_submit_flush_data md_handle_request active_io + 1 make_request active_io - 1 If active_io is dec after md_handle_request() instead of within submit_flushes(), make_request() can be called directly intead of md_handle_request() in md_submit_flush_data(), and active_io will only inc and dec once in the whole flush process. Deadlock will be fixed. Additionally, the only difference between fixing the issue and before is that there is no return error handling of make_request(). But after previous patch cleaned md_write_start(), make_requst() only return error in raid5_make_request() by dm-raid, see commit 41425f96d7aa ("dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape)". Since dm always splits data and flush operation into two separate io, io size of flush submitted by dm always is 0, make_request() will not be called in md_submit_flush_data(). To prevent future modifications from introducing issues, add WARN_ON to ensure make_request() no error is returned in this context. | ||||
| CVE-2024-43854 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: initialize integrity buffer to zero before writing it to media Metadata added by bio_integrity_prep is using plain kmalloc, which leads to random kernel memory being written media. For PI metadata this is limited to the app tag that isn't used by kernel generated metadata, but for non-PI metadata the entire buffer leaks kernel memory. Fix this by adding the __GFP_ZERO flag to allocations for writes. | ||||
| CVE-2024-43853 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Prevent UAF in proc_cpuset_show() An UAF can happen when /proc/cpuset is read as reported in [1]. This can be reproduced by the following methods: 1.add an mdelay(1000) before acquiring the cgroup_lock In the cgroup_path_ns function. 2.$cat /proc/<pid>/cpuset repeatly. 3.$mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset/ $umount /sys/fs/cgroup/cpuset/ repeatly. The race that cause this bug can be shown as below: (umount) | (cat /proc/<pid>/cpuset) css_release | proc_cpuset_show css_release_work_fn | css = task_get_css(tsk, cpuset_cgrp_id); css_free_rwork_fn | cgroup_path_ns(css->cgroup, ...); cgroup_destroy_root | mutex_lock(&cgroup_mutex); rebind_subsystems | cgroup_free_root | | // cgrp was freed, UAF | cgroup_path_ns_locked(cgrp,..); When the cpuset is initialized, the root node top_cpuset.css.cgrp will point to &cgrp_dfl_root.cgrp. In cgroup v1, the mount operation will allocate cgroup_root, and top_cpuset.css.cgrp will point to the allocated &cgroup_root.cgrp. When the umount operation is executed, top_cpuset.css.cgrp will be rebound to &cgrp_dfl_root.cgrp. The problem is that when rebinding to cgrp_dfl_root, there are cases where the cgroup_root allocated by setting up the root for cgroup v1 is cached. This could lead to a Use-After-Free (UAF) if it is subsequently freed. The descendant cgroups of cgroup v1 can only be freed after the css is released. However, the css of the root will never be released, yet the cgroup_root should be freed when it is unmounted. This means that obtaining a reference to the css of the root does not guarantee that css.cgrp->root will not be freed. Fix this problem by using rcu_read_lock in proc_cpuset_show(). As cgroup_root is kfree_rcu after commit d23b5c577715 ("cgroup: Make operations on the cgroup root_list RCU safe"), css->cgroup won't be freed during the critical section. To call cgroup_path_ns_locked, css_set_lock is needed, so it is safe to replace task_get_css with task_css. [1] https://syzkaller.appspot.com/bug?extid=9b1ff7be974a403aa4cd | ||||
| CVE-2024-43846 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: lib: objagg: Fix general protection fault The library supports aggregation of objects into other objects only if the parent object does not have a parent itself. That is, nesting is not supported. Aggregation happens in two cases: Without and with hints, where hints are a pre-computed recommendation on how to aggregate the provided objects. Nesting is not possible in the first case due to a check that prevents it, but in the second case there is no check because the assumption is that nesting cannot happen when creating objects based on hints. The violation of this assumption leads to various warnings and eventually to a general protection fault [1]. Before fixing the root cause, error out when nesting happens and warn. [1] general protection fault, probably for non-canonical address 0xdead000000000d90: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 1083 Comm: kworker/1:9 Tainted: G W 6.9.0-rc6-custom-gd9b4f1cca7fb #7 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_erp_bf_insert+0x25/0x80 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_entry_add+0x256/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270 mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> | ||||
| CVE-2024-43842 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: Fix array index mistake in rtw89_sta_info_get_iter() In rtw89_sta_info_get_iter() 'status->he_gi' is compared to array size. But then 'rate->he_gi' is used as array index instead of 'status->he_gi'. This can lead to go beyond array boundaries in case of 'rate->he_gi' is not equal to 'status->he_gi' and is bigger than array size. Looks like "copy-paste" mistake. Fix this mistake by replacing 'rate->he_gi' with 'status->he_gi'. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2024-43834 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xdp: fix invalid wait context of page_pool_destroy() If the driver uses a page pool, it creates a page pool with page_pool_create(). The reference count of page pool is 1 as default. A page pool will be destroyed only when a reference count reaches 0. page_pool_destroy() is used to destroy page pool, it decreases a reference count. When a page pool is destroyed, ->disconnect() is called, which is mem_allocator_disconnect(). This function internally acquires mutex_lock(). If the driver uses XDP, it registers a memory model with xdp_rxq_info_reg_mem_model(). The xdp_rxq_info_reg_mem_model() internally increases a page pool reference count if a memory model is a page pool. Now the reference count is 2. To destroy a page pool, the driver should call both page_pool_destroy() and xdp_unreg_mem_model(). The xdp_unreg_mem_model() internally calls page_pool_destroy(). Only page_pool_destroy() decreases a reference count. If a driver calls page_pool_destroy() then xdp_unreg_mem_model(), we will face an invalid wait context warning. Because xdp_unreg_mem_model() calls page_pool_destroy() with rcu_read_lock(). The page_pool_destroy() internally acquires mutex_lock(). Splat looks like: ============================= [ BUG: Invalid wait context ] 6.10.0-rc6+ #4 Tainted: G W ----------------------------- ethtool/1806 is trying to lock: ffffffff90387b90 (mem_id_lock){+.+.}-{4:4}, at: mem_allocator_disconnect+0x73/0x150 other info that might help us debug this: context-{5:5} 3 locks held by ethtool/1806: stack backtrace: CPU: 0 PID: 1806 Comm: ethtool Tainted: G W 6.10.0-rc6+ #4 f916f41f172891c800f2fed Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 Call Trace: <TASK> dump_stack_lvl+0x7e/0xc0 __lock_acquire+0x1681/0x4de0 ? _printk+0x64/0xe0 ? __pfx_mark_lock.part.0+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 lock_acquire+0x1b3/0x580 ? mem_allocator_disconnect+0x73/0x150 ? __wake_up_klogd.part.0+0x16/0xc0 ? __pfx_lock_acquire+0x10/0x10 ? dump_stack_lvl+0x91/0xc0 __mutex_lock+0x15c/0x1690 ? mem_allocator_disconnect+0x73/0x150 ? __pfx_prb_read_valid+0x10/0x10 ? mem_allocator_disconnect+0x73/0x150 ? __pfx_llist_add_batch+0x10/0x10 ? console_unlock+0x193/0x1b0 ? lockdep_hardirqs_on+0xbe/0x140 ? __pfx___mutex_lock+0x10/0x10 ? tick_nohz_tick_stopped+0x16/0x90 ? __irq_work_queue_local+0x1e5/0x330 ? irq_work_queue+0x39/0x50 ? __wake_up_klogd.part.0+0x79/0xc0 ? mem_allocator_disconnect+0x73/0x150 mem_allocator_disconnect+0x73/0x150 ? __pfx_mem_allocator_disconnect+0x10/0x10 ? mark_held_locks+0xa5/0xf0 ? rcu_is_watching+0x11/0xb0 page_pool_release+0x36e/0x6d0 page_pool_destroy+0xd7/0x440 xdp_unreg_mem_model+0x1a7/0x2a0 ? __pfx_xdp_unreg_mem_model+0x10/0x10 ? kfree+0x125/0x370 ? bnxt_free_ring.isra.0+0x2eb/0x500 ? bnxt_free_mem+0x5ac/0x2500 xdp_rxq_info_unreg+0x4a/0xd0 bnxt_free_mem+0x1356/0x2500 bnxt_close_nic+0xf0/0x3b0 ? __pfx_bnxt_close_nic+0x10/0x10 ? ethnl_parse_bit+0x2c6/0x6d0 ? __pfx___nla_validate_parse+0x10/0x10 ? __pfx_ethnl_parse_bit+0x10/0x10 bnxt_set_features+0x2a8/0x3e0 __netdev_update_features+0x4dc/0x1370 ? ethnl_parse_bitset+0x4ff/0x750 ? __pfx_ethnl_parse_bitset+0x10/0x10 ? __pfx___netdev_update_features+0x10/0x10 ? mark_held_locks+0xa5/0xf0 ? _raw_spin_unlock_irqrestore+0x42/0x70 ? __pm_runtime_resume+0x7d/0x110 ethnl_set_features+0x32d/0xa20 To fix this problem, it uses rhashtable_lookup_fast() instead of rhashtable_lookup() with rcu_read_lock(). Using xa without rcu_read_lock() here is safe. xa is freed by __xdp_mem_allocator_rcu_free() and this is called by call_rcu() of mem_xa_remove(). The mem_xa_remove() is called by page_pool_destroy() if a reference count reaches 0. The xa is already protected by the reference count mechanism well in the control plane. So removing rcu_read_lock() for page_pool_destroy() is safe. | ||||
| CVE-2024-43830 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: leds: trigger: Unregister sysfs attributes before calling deactivate() Triggers which have trigger specific sysfs attributes typically store related data in trigger-data allocated by the activate() callback and freed by the deactivate() callback. Calling device_remove_groups() after calling deactivate() leaves a window where the sysfs attributes show/store functions could be called after deactivation and then operate on the just freed trigger-data. Move the device_remove_groups() call to before deactivate() to close this race window. This also makes the deactivation path properly do things in reverse order of the activation path which calls the activate() callback before calling device_add_groups(). | ||||
| CVE-2024-43828 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix infinite loop when replaying fast_commit When doing fast_commit replay an infinite loop may occur due to an uninitialized extent_status struct. ext4_ext_determine_insert_hole() does not detect the replay and calls ext4_es_find_extent_range(), which will return immediately without initializing the 'es' variable. Because 'es' contains garbage, an integer overflow may happen causing an infinite loop in this function, easily reproducible using fstest generic/039. This commit fixes this issue by unconditionally initializing the structure in function ext4_es_find_extent_range(). Thanks to Zhang Yi, for figuring out the real problem! | ||||
| CVE-2024-43823 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: keystone: Fix NULL pointer dereference in case of DT error in ks_pcie_setup_rc_app_regs() If IORESOURCE_MEM is not provided in Device Tree due to any error, resource_list_first_type() will return NULL and pci_parse_request_of_pci_ranges() will just emit a warning. This will cause a NULL pointer dereference. Fix this bug by adding NULL return check. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2024-43817 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: missing check virtio Two missing check in virtio_net_hdr_to_skb() allowed syzbot to crash kernels again 1. After the skb_segment function the buffer may become non-linear (nr_frags != 0), but since the SKBTX_SHARED_FRAG flag is not set anywhere the __skb_linearize function will not be executed, then the buffer will remain non-linear. Then the condition (offset >= skb_headlen(skb)) becomes true, which causes WARN_ON_ONCE in skb_checksum_help. 2. The struct sk_buff and struct virtio_net_hdr members must be mathematically related. (gso_size) must be greater than (needed) otherwise WARN_ON_ONCE. (remainder) must be greater than (needed) otherwise WARN_ON_ONCE. (remainder) may be 0 if division is without remainder. offset+2 (4191) > skb_headlen() (1116) WARNING: CPU: 1 PID: 5084 at net/core/dev.c:3303 skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303 Modules linked in: CPU: 1 PID: 5084 Comm: syz-executor336 Not tainted 6.7.0-rc3-syzkaller-00014-gdf60cee26a2e #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 RIP: 0010:skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303 Code: 89 e8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 52 01 00 00 44 89 e2 2b 53 74 4c 89 ee 48 c7 c7 40 57 e9 8b e8 af 8f dd f8 90 <0f> 0b 90 90 e9 87 fe ff ff e8 40 0f 6e f9 e9 4b fa ff ff 48 89 ef RSP: 0018:ffffc90003a9f338 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff888025125780 RCX: ffffffff814db209 RDX: ffff888015393b80 RSI: ffffffff814db216 RDI: 0000000000000001 RBP: ffff8880251257f4 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 000000000000045c R13: 000000000000105f R14: ffff8880251257f0 R15: 000000000000105d FS: 0000555555c24380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002000f000 CR3: 0000000023151000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ip_do_fragment+0xa1b/0x18b0 net/ipv4/ip_output.c:777 ip_fragment.constprop.0+0x161/0x230 net/ipv4/ip_output.c:584 ip_finish_output_gso net/ipv4/ip_output.c:286 [inline] __ip_finish_output net/ipv4/ip_output.c:308 [inline] __ip_finish_output+0x49c/0x650 net/ipv4/ip_output.c:295 ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip_output+0x13b/0x2a0 net/ipv4/ip_output.c:433 dst_output include/net/dst.h:451 [inline] ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:129 iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82 ipip6_tunnel_xmit net/ipv6/sit.c:1034 [inline] sit_tunnel_xmit+0xed2/0x28f0 net/ipv6/sit.c:1076 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3545 [inline] dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3561 __dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4346 dev_queue_xmit include/linux/netdevice.h:3134 [inline] packet_xmit+0x257/0x380 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x24ca/0x5240 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 __sys_sendto+0x255/0x340 net/socket.c:2190 __do_sys_sendto net/socket.c:2202 [inline] __se_sys_sendto net/socket.c:2198 [inline] __x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Found by Linux Verification Center (linuxtesting.org) with Syzkaller | ||||
| CVE-2024-43168 | 1 Redhat | 3 Enterprise Linux, Openshift, Openstack | 2025-11-03 | 4.8 Medium |
| DISPUTE NOTE: this issue does not pose a security risk as it (according to analysis by the original software developer, NLnet Labs) falls within the expected functionality and security controls of the application. Red Hat has made a claim that there is a security risk within Red Hat products. NLnet Labs has no further information about the claim, and suggests that affected Red Hat customers refer to available Red Hat documentation or support channels. ORIGINAL DESCRIPTION: A heap-buffer-overflow flaw was found in the cfg_mark_ports function within Unbound's config_file.c, which can lead to memory corruption. This issue could allow an attacker with local access to provide specially crafted input, potentially causing the application to crash or allowing arbitrary code execution. This could result in a denial of service or unauthorized actions on the system. | ||||