Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
15870 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50617 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/powerplay/psm: Fix memory leak in power state init Commit 902bc65de0b3 ("drm/amdgpu/powerplay/psm: return an error in power state init") made the power state init function return early in case of failure to get an entry from the powerplay table, but it missed to clean up the allocated memory for the current power state before returning. | ||||
| CVE-2023-53769 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virt/coco/sev-guest: Double-buffer messages The encryption algorithms read and write directly to shared unencrypted memory, which may leak information as well as permit the host to tamper with the message integrity. Instead, copy whole messages in or out as needed before doing any computation on them. | ||||
| CVE-2022-50624 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: netsec: fix error handling in netsec_register_mdio() If phy_device_register() fails, phy_device_free() need be called to put refcount, so memory of phy device and device name can be freed in callback function. If get_phy_device() fails, mdiobus_unregister() need be called, or it will cause warning in mdiobus_free() and kobject is leaked. | ||||
| CVE-2025-40321 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix crash while sending Action Frames in standalone AP Mode Currently, whenever there is a need to transmit an Action frame, the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to firmware. The P2P interfaces were available when wpa_supplicant is managing the wlan interface. However, the P2P interfaces are not created/initialized when only hostapd is managing the wlan interface. And if hostapd receives an ANQP Query REQ Action frame even from an un-associated STA, the brcmfmac driver tries to use an uninitialized P2P vif pointer for sending the IOVAR to firmware. This NULL pointer dereferencing triggers a driver crash. [ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] [ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [...] [ 1417.075653] Call trace: [ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac] [ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac] [ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211] [ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211] [ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158 [ 1417.076302] genl_rcv_msg+0x220/0x2a0 [ 1417.076317] netlink_rcv_skb+0x68/0x140 [ 1417.076330] genl_rcv+0x40/0x60 [ 1417.076343] netlink_unicast+0x330/0x3b8 [ 1417.076357] netlink_sendmsg+0x19c/0x3f8 [ 1417.076370] __sock_sendmsg+0x64/0xc0 [ 1417.076391] ____sys_sendmsg+0x268/0x2a0 [ 1417.076408] ___sys_sendmsg+0xb8/0x118 [ 1417.076427] __sys_sendmsg+0x90/0xf8 [ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40 [ 1417.076465] invoke_syscall+0x50/0x120 [ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0 [ 1417.076506] do_el0_svc+0x24/0x38 [ 1417.076525] el0_svc+0x30/0x100 [ 1417.076548] el0t_64_sync_handler+0x100/0x130 [ 1417.076569] el0t_64_sync+0x190/0x198 [ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000) Fix this, by always using the vif corresponding to the wdev on which the Action frame Transmission request was initiated by the userspace. This way, even if P2P vif is not available, the IOVAR is sent to firmware on AP vif and the ANQP Query RESP Action frame is transmitted without crashing the driver. Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev() to brcmf_p2p_attach(). Because the former function would not get executed when only hostapd is managing wlan interface, and it is not safe to do reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior init_completion(). And in the brcmf_p2p_tx_action_frame() function, the condition check for P2P Presence response frame is not needed, since the wpa_supplicant is properly sending the P2P Presense Response frame on the P2P-GO vif instead of the P2P-Device vif. [Cc stable] | ||||
| CVE-2023-53749 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86: fix clear_user_rep_good() exception handling annotation This code no longer exists in mainline, because it was removed in commit d2c95f9d6802 ("x86: don't use REP_GOOD or ERMS for user memory clearing") upstream. However, rather than backport the full range of x86 memory clearing and copying cleanups, fix the exception table annotation placement for the final 'rep movsb' in clear_user_rep_good(): rather than pointing at the actual instruction that did the user space access, it pointed to the register move just before it. That made sense from a code flow standpoint, but not from an actual usage standpoint: it means that if user access takes an exception, the exception handler won't actually find the instruction in the exception tables. As a result, rather than fixing it up and returning -EFAULT, it would then turn it into a kernel oops report instead, something like: BUG: unable to handle page fault for address: 0000000020081000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page ... RIP: 0010:clear_user_rep_good+0x1c/0x30 arch/x86/lib/clear_page_64.S:147 ... Call Trace: __clear_user arch/x86/include/asm/uaccess_64.h:103 [inline] clear_user arch/x86/include/asm/uaccess_64.h:124 [inline] iov_iter_zero+0x709/0x1290 lib/iov_iter.c:800 iomap_dio_hole_iter fs/iomap/direct-io.c:389 [inline] iomap_dio_iter fs/iomap/direct-io.c:440 [inline] __iomap_dio_rw+0xe3d/0x1cd0 fs/iomap/direct-io.c:601 iomap_dio_rw+0x40/0xa0 fs/iomap/direct-io.c:689 ext4_dio_read_iter fs/ext4/file.c:94 [inline] ext4_file_read_iter+0x4be/0x690 fs/ext4/file.c:145 call_read_iter include/linux/fs.h:2183 [inline] do_iter_readv_writev+0x2e0/0x3b0 fs/read_write.c:733 do_iter_read+0x2f2/0x750 fs/read_write.c:796 vfs_readv+0xe5/0x150 fs/read_write.c:916 do_preadv+0x1b6/0x270 fs/read_write.c:1008 __do_sys_preadv2 fs/read_write.c:1070 [inline] __se_sys_preadv2 fs/read_write.c:1061 [inline] __x64_sys_preadv2+0xef/0x150 fs/read_write.c:1061 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd which then looks like a filesystem bug rather than the incorrect exception annotation that it is. [ The alternative to this one-liner fix is to take the upstream series that cleans this all up: 68674f94ffc9 ("x86: don't use REP_GOOD or ERMS for small memory copies") 20f3337d350c ("x86: don't use REP_GOOD or ERMS for small memory clearing") adfcf4231b8c ("x86: don't use REP_GOOD or ERMS for user memory copies") * d2c95f9d6802 ("x86: don't use REP_GOOD or ERMS for user memory clearing") 3639a535587d ("x86: move stac/clac from user copy routines into callers") 577e6a7fd50d ("x86: inline the 'rep movs' in user copies for the FSRM case") 8c9b6a88b7e2 ("x86: improve on the non-rep 'clear_user' function") 427fda2c8a49 ("x86: improve on the non-rep 'copy_user' function") * e046fe5a36a9 ("x86: set FSRS automatically on AMD CPUs that have FSRM") e1f2750edc4a ("x86: remove 'zerorest' argument from __copy_user_nocache()") 034ff37d3407 ("x86: rewrite '__copy_user_nocache' function") with either the whole series or at a minimum the two marked commits being needed to fix this issue ] | ||||
| CVE-2023-53744 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: ti: pm33xx: Fix refcount leak in am33xx_pm_probe wkup_m3_ipc_get() takes refcount, which should be freed by wkup_m3_ipc_put(). Add missing refcount release in the error paths. | ||||
| CVE-2025-40315 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix epfile null pointer access after ep enable. A race condition occurs when ffs_func_eps_enable() runs concurrently with ffs_data_reset(). The ffs_data_clear() called in ffs_data_reset() sets ffs->epfiles to NULL before resetting ffs->eps_count to 0, leading to a NULL pointer dereference when accessing epfile->ep in ffs_func_eps_enable() after successful usb_ep_enable(). The ffs->epfiles pointer is set to NULL in both ffs_data_clear() and ffs_data_close() functions, and its modification is protected by the spinlock ffs->eps_lock. And the whole ffs_func_eps_enable() function is also protected by ffs->eps_lock. Thus, add NULL pointer handling for ffs->epfiles in the ffs_func_eps_enable() function to fix issues | ||||
| CVE-2025-40324 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix crash in nfsd4_read_release() When tracing is enabled, the trace_nfsd_read_done trace point crashes during the pynfs read.testNoFh test. | ||||
| CVE-2023-53742 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kcsan: Avoid READ_ONCE() in read_instrumented_memory() Haibo Li reported: | Unable to handle kernel paging request at virtual address | ffffff802a0d8d7171 | Mem abort info:o: | ESR = 0x9600002121 | EC = 0x25: DABT (current EL), IL = 32 bitsts | SET = 0, FnV = 0 0 | EA = 0, S1PTW = 0 0 | FSC = 0x21: alignment fault | Data abort info:o: | ISV = 0, ISS = 0x0000002121 | CM = 0, WnR = 0 0 | swapper pgtable: 4k pages, 39-bit VAs, pgdp=000000002835200000 | [ffffff802a0d8d71] pgd=180000005fbf9003, p4d=180000005fbf9003, | pud=180000005fbf9003, pmd=180000005fbe8003, pte=006800002a0d8707 | Internal error: Oops: 96000021 [#1] PREEMPT SMP | Modules linked in: | CPU: 2 PID: 45 Comm: kworker/u8:2 Not tainted | 5.15.78-android13-8-g63561175bbda-dirty #1 | ... | pc : kcsan_setup_watchpoint+0x26c/0x6bc | lr : kcsan_setup_watchpoint+0x88/0x6bc | sp : ffffffc00ab4b7f0 | x29: ffffffc00ab4b800 x28: ffffff80294fe588 x27: 0000000000000001 | x26: 0000000000000019 x25: 0000000000000001 x24: ffffff80294fdb80 | x23: 0000000000000000 x22: ffffffc00a70fb68 x21: ffffff802a0d8d71 | x20: 0000000000000002 x19: 0000000000000000 x18: ffffffc00a9bd060 | x17: 0000000000000001 x16: 0000000000000000 x15: ffffffc00a59f000 | x14: 0000000000000001 x13: 0000000000000000 x12: ffffffc00a70faa0 | x11: 00000000aaaaaaab x10: 0000000000000054 x9 : ffffffc00839adf8 | x8 : ffffffc009b4cf00 x7 : 0000000000000000 x6 : 0000000000000007 | x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffffffc00a70fb70 | x2 : 0005ff802a0d8d71 x1 : 0000000000000000 x0 : 0000000000000000 | Call trace: | kcsan_setup_watchpoint+0x26c/0x6bc | __tsan_read2+0x1f0/0x234 | inflate_fast+0x498/0x750 | zlib_inflate+0x1304/0x2384 | __gunzip+0x3a0/0x45c | gunzip+0x20/0x30 | unpack_to_rootfs+0x2a8/0x3fc | do_populate_rootfs+0xe8/0x11c | async_run_entry_fn+0x58/0x1bc | process_one_work+0x3ec/0x738 | worker_thread+0x4c4/0x838 | kthread+0x20c/0x258 | ret_from_fork+0x10/0x20 | Code: b8bfc2a8 2a0803f7 14000007 d503249f (78bfc2a8) ) | ---[ end trace 613a943cb0a572b6 ]----- The reason for this is that on certain arm64 configuration since e35123d83ee3 ("arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y"), READ_ONCE() may be promoted to a full atomic acquire instruction which cannot be used on unaligned addresses. Fix it by avoiding READ_ONCE() in read_instrumented_memory(), and simply forcing the compiler to do the required access by casting to the appropriate volatile type. In terms of generated code this currently only affects architectures that do not use the default READ_ONCE() implementation. The only downside is that we are not guaranteed atomicity of the access itself, although on most architectures a plain load up to machine word size should still be atomic (a fact the default READ_ONCE() still relies on itself). | ||||
| CVE-2022-50623 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fpga: prevent integer overflow in dfl_feature_ioctl_set_irq() The "hdr.count * sizeof(s32)" multiplication can overflow on 32 bit systems leading to memory corruption. Use array_size() to fix that. | ||||
| CVE-2022-50614 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: pci_endpoint_test: Fix pci_endpoint_test_{copy,write,read}() panic The dma_map_single() doesn't permit zero length mapping. It causes a follow panic. A panic was reported on arm64: [ 60.137988] ------------[ cut here ]------------ [ 60.142630] kernel BUG at kernel/dma/swiotlb.c:624! [ 60.147508] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 60.152992] Modules linked in: dw_hdmi_cec crct10dif_ce simple_bridge rcar_fdp1 vsp1 rcar_vin videobuf2_vmalloc rcar_csi2 v4l 2_mem2mem videobuf2_dma_contig videobuf2_memops pci_endpoint_test videobuf2_v4l2 videobuf2_common rcar_fcp v4l2_fwnode v4l2_asyn c videodev mc gpio_bd9571mwv max9611 pwm_rcar ccree at24 authenc libdes phy_rcar_gen3_usb3 usb_dmac display_connector pwm_bl [ 60.186252] CPU: 0 PID: 508 Comm: pcitest Not tainted 6.0.0-rc1rpci-dev+ #237 [ 60.193387] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT) [ 60.201302] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 60.208263] pc : swiotlb_tbl_map_single+0x2c0/0x590 [ 60.213149] lr : swiotlb_map+0x88/0x1f0 [ 60.216982] sp : ffff80000a883bc0 [ 60.220292] x29: ffff80000a883bc0 x28: 0000000000000000 x27: 0000000000000000 [ 60.227430] x26: 0000000000000000 x25: ffff0004c0da20d0 x24: ffff80000a1f77c0 [ 60.234567] x23: 0000000000000002 x22: 0001000040000010 x21: 000000007a000000 [ 60.241703] x20: 0000000000200000 x19: 0000000000000000 x18: 0000000000000000 [ 60.248840] x17: 0000000000000000 x16: 0000000000000000 x15: ffff0006ff7b9180 [ 60.255977] x14: ffff0006ff7b9180 x13: 0000000000000000 x12: 0000000000000000 [ 60.263113] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 60.270249] x8 : 0001000000000010 x7 : ffff0004c6754b20 x6 : 0000000000000000 [ 60.277385] x5 : ffff0004c0da2090 x4 : 0000000000000000 x3 : 0000000000000001 [ 60.284521] x2 : 0000000040000000 x1 : 0000000000000000 x0 : 0000000040000010 [ 60.291658] Call trace: [ 60.294100] swiotlb_tbl_map_single+0x2c0/0x590 [ 60.298629] swiotlb_map+0x88/0x1f0 [ 60.302115] dma_map_page_attrs+0x188/0x230 [ 60.306299] pci_endpoint_test_ioctl+0x5e4/0xd90 [pci_endpoint_test] [ 60.312660] __arm64_sys_ioctl+0xa8/0xf0 [ 60.316583] invoke_syscall+0x44/0x108 [ 60.320334] el0_svc_common.constprop.0+0xcc/0xf0 [ 60.325038] do_el0_svc+0x2c/0xb8 [ 60.328351] el0_svc+0x2c/0x88 [ 60.331406] el0t_64_sync_handler+0xb8/0xc0 [ 60.335587] el0t_64_sync+0x18c/0x190 [ 60.339251] Code: 52800013 d2e00414 35fff45c d503201f (d4210000) [ 60.345344] ---[ end trace 0000000000000000 ]--- To fix it, this patch adds a checking the payload length if it is zero. | ||||
| CVE-2022-50615 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix reference count leak in snr_uncore_mmio_map() pci_get_device() will increase the reference count for the returned pci_dev, so snr_uncore_get_mc_dev() will return a pci_dev with its reference count increased. We need to call pci_dev_put() to decrease the reference count. Let's add the missing pci_dev_put(). | ||||
| CVE-2025-40320 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential cfid UAF in smb2_query_info_compound When smb2_query_info_compound() retries, a previously allocated cfid may have been freed in the first attempt. Because cfid wasn't reset on replay, later cleanup could act on a stale pointer, leading to a potential use-after-free. Reinitialize cfid to NULL under the replay label. Example trace (trimmed): refcount_t: underflow; use-after-free. WARNING: CPU: 1 PID: 11224 at ../lib/refcount.c:28 refcount_warn_saturate+0x9c/0x110 [...] RIP: 0010:refcount_warn_saturate+0x9c/0x110 [...] Call Trace: <TASK> smb2_query_info_compound+0x29c/0x5c0 [cifs f90b72658819bd21c94769b6a652029a07a7172f] ? step_into+0x10d/0x690 ? __legitimize_path+0x28/0x60 smb2_queryfs+0x6a/0xf0 [cifs f90b72658819bd21c94769b6a652029a07a7172f] smb311_queryfs+0x12d/0x140 [cifs f90b72658819bd21c94769b6a652029a07a7172f] ? kmem_cache_alloc+0x18a/0x340 ? getname_flags+0x46/0x1e0 cifs_statfs+0x9f/0x2b0 [cifs f90b72658819bd21c94769b6a652029a07a7172f] statfs_by_dentry+0x67/0x90 vfs_statfs+0x16/0xd0 user_statfs+0x54/0xa0 __do_sys_statfs+0x20/0x50 do_syscall_64+0x58/0x80 | ||||
| CVE-2022-50618 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: meson-gx: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, it will lead two issues: 1. The memory that allocated in mmc_alloc_host() is leaked. 2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del(). Fix this by checking the return value and goto error path which will call mmc_free_host(). | ||||
| CVE-2023-53760 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: mcq: Fix &hwq->cq_lock deadlock issue When ufshcd_err_handler() is executed, CQ event interrupt can enter waiting for the same lock. This can happen in ufshcd_handle_mcq_cq_events() and also in ufs_mtk_mcq_intr(). The following warning message will be generated when &hwq->cq_lock is used in IRQ context with IRQ enabled. Use ufshcd_mcq_poll_cqe_lock() with spin_lock_irqsave instead of spin_lock to resolve the deadlock issue. [name:lockdep&]WARNING: inconsistent lock state [name:lockdep&]-------------------------------- [name:lockdep&]inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [name:lockdep&]kworker/u16:4/260 [HC0[0]:SC0[0]:HE1:SE1] takes: ffffff8028444600 (&hwq->cq_lock){?.-.}-{2:2}, at: ufshcd_mcq_poll_cqe_lock+0x30/0xe0 [name:lockdep&]{IN-HARDIRQ-W} state was registered at: lock_acquire+0x17c/0x33c _raw_spin_lock+0x5c/0x7c ufshcd_mcq_poll_cqe_lock+0x30/0xe0 ufs_mtk_mcq_intr+0x60/0x1bc [ufs_mediatek_mod] __handle_irq_event_percpu+0x140/0x3ec handle_irq_event+0x50/0xd8 handle_fasteoi_irq+0x148/0x2b0 generic_handle_domain_irq+0x4c/0x6c gic_handle_irq+0x58/0x134 call_on_irq_stack+0x40/0x74 do_interrupt_handler+0x84/0xe4 el1_interrupt+0x3c/0x78 <snip> Possible unsafe locking scenario: CPU0 ---- lock(&hwq->cq_lock); <Interrupt> lock(&hwq->cq_lock); *** DEADLOCK *** 2 locks held by kworker/u16:4/260: [name:lockdep&] stack backtrace: CPU: 7 PID: 260 Comm: kworker/u16:4 Tainted: G S W OE 6.1.17-mainline-android14-2-g277223301adb #1 Workqueue: ufs_eh_wq_0 ufshcd_err_handler Call trace: dump_backtrace+0x10c/0x160 show_stack+0x20/0x30 dump_stack_lvl+0x98/0xd8 dump_stack+0x20/0x60 print_usage_bug+0x584/0x76c mark_lock_irq+0x488/0x510 mark_lock+0x1ec/0x25c __lock_acquire+0x4d8/0xffc lock_acquire+0x17c/0x33c _raw_spin_lock+0x5c/0x7c ufshcd_mcq_poll_cqe_lock+0x30/0xe0 ufshcd_poll+0x68/0x1b0 ufshcd_transfer_req_compl+0x9c/0xc8 ufshcd_err_handler+0x3bc/0xea0 process_one_work+0x2f4/0x7e8 worker_thread+0x234/0x450 kthread+0x110/0x134 ret_from_fork+0x10/0x20 | ||||
| CVE-2022-50628 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/gud: Fix UBSAN warning UBSAN complains about invalid value for bool: [ 101.165172] [drm] Initialized gud 1.0.0 20200422 for 2-3.2:1.0 on minor 1 [ 101.213360] gud 2-3.2:1.0: [drm] fb1: guddrmfb frame buffer device [ 101.213426] usbcore: registered new interface driver gud [ 101.989431] ================================================================================ [ 101.989441] UBSAN: invalid-load in linux/include/linux/iosys-map.h:253:9 [ 101.989447] load of value 121 is not a valid value for type '_Bool' [ 101.989451] CPU: 1 PID: 455 Comm: kworker/1:6 Not tainted 5.18.0-rc5-gud-5.18-rc5 #3 [ 101.989456] Hardware name: Hewlett-Packard HP EliteBook 820 G1/1991, BIOS L71 Ver. 01.44 04/12/2018 [ 101.989459] Workqueue: events_long gud_flush_work [gud] [ 101.989471] Call Trace: [ 101.989474] <TASK> [ 101.989479] dump_stack_lvl+0x49/0x5f [ 101.989488] dump_stack+0x10/0x12 [ 101.989493] ubsan_epilogue+0x9/0x3b [ 101.989498] __ubsan_handle_load_invalid_value.cold+0x44/0x49 [ 101.989504] dma_buf_vmap.cold+0x38/0x3d [ 101.989511] ? find_busiest_group+0x48/0x300 [ 101.989520] drm_gem_shmem_vmap+0x76/0x1b0 [drm_shmem_helper] [ 101.989528] drm_gem_shmem_object_vmap+0x9/0xb [drm_shmem_helper] [ 101.989535] drm_gem_vmap+0x26/0x60 [drm] [ 101.989594] drm_gem_fb_vmap+0x47/0x150 [drm_kms_helper] [ 101.989630] gud_prep_flush+0xc1/0x710 [gud] [ 101.989639] ? _raw_spin_lock+0x17/0x40 [ 101.989648] gud_flush_work+0x1e0/0x430 [gud] [ 101.989653] ? __switch_to+0x11d/0x470 [ 101.989664] process_one_work+0x21f/0x3f0 [ 101.989673] worker_thread+0x200/0x3e0 [ 101.989679] ? rescuer_thread+0x390/0x390 [ 101.989684] kthread+0xfd/0x130 [ 101.989690] ? kthread_complete_and_exit+0x20/0x20 [ 101.989696] ret_from_fork+0x22/0x30 [ 101.989706] </TASK> [ 101.989708] ================================================================================ The source of this warning is in iosys_map_clear() called from dma_buf_vmap(). It conditionally sets values based on map->is_iomem. The iosys_map variables are allocated uninitialized on the stack leading to ->is_iomem having all kinds of values and not only 0/1. Fix this by zeroing the iosys_map variables. | ||||
| CVE-2025-40305 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: 9p/trans_fd: p9_fd_request: kick rx thread if EPOLLIN p9_read_work() doesn't set Rworksched and doesn't do schedule_work(m->rq) if list_empty(&m->req_list). However, if the pipe is full, we need to read more data and this used to work prior to commit aaec5a95d59615 ("pipe_read: don't wake up the writer if the pipe is still full"). p9_read_work() does p9_fd_read() -> ... -> anon_pipe_read() which (before the commit above) triggered the unnecessary wakeup. This wakeup calls p9_pollwake() which kicks p9_poll_workfn() -> p9_poll_mux(), p9_poll_mux() will notice EPOLLIN and schedule_work(&m->rq). This no longer happens after the optimization above, change p9_fd_request() to use p9_poll_mux() instead of only checking for EPOLLOUT. | ||||
| CVE-2023-53746 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: fix memory leak in vfio_ap device driver The device release callback function invoked to release the matrix device uses the dev_get_drvdata(device *dev) function to retrieve the pointer to the vfio_matrix_dev object in order to free its storage. The problem is, this object is not stored as drvdata with the device; since the kfree function will accept a NULL pointer, the memory for the vfio_matrix_dev object is never freed. Since the device being released is contained within the vfio_matrix_dev object, the container_of macro will be used to retrieve its pointer. | ||||
| CVE-2023-53751 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix potential use-after-free bugs in TCP_Server_Info::hostname TCP_Server_Info::hostname may be updated once or many times during reconnect, so protect its access outside reconnect path as well and then prevent any potential use-after-free bugs. | ||||
| CVE-2023-53756 | 1 Linux | 1 Linux Kernel | 2025-12-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Fix crash due to uninitialized current_vmcs KVM enables 'Enlightened VMCS' and 'Enlightened MSR Bitmap' when running as a nested hypervisor on top of Hyper-V. When MSR bitmap is updated, evmcs_touch_msr_bitmap function uses current_vmcs per-cpu variable to mark that the msr bitmap was changed. vmx_vcpu_create() modifies the msr bitmap via vmx_disable_intercept_for_msr -> vmx_msr_bitmap_l01_changed which in the end calls this function. The function checks for current_vmcs if it is null but the check is insufficient because current_vmcs is not initialized. Because of this, the code might incorrectly write to the structure pointed by current_vmcs value left by another task. Preemption is not disabled, the current task can be preempted and moved to another CPU while current_vmcs is accessed multiple times from evmcs_touch_msr_bitmap() which leads to crash. The manipulation of MSR bitmaps by callers happens only for vmcs01 so the solution is to use vmx->vmcs01.vmcs instead of current_vmcs. BUG: kernel NULL pointer dereference, address: 0000000000000338 PGD 4e1775067 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI ... RIP: 0010:vmx_msr_bitmap_l01_changed+0x39/0x50 [kvm_intel] ... Call Trace: vmx_disable_intercept_for_msr+0x36/0x260 [kvm_intel] vmx_vcpu_create+0xe6/0x540 [kvm_intel] kvm_arch_vcpu_create+0x1d1/0x2e0 [kvm] kvm_vm_ioctl_create_vcpu+0x178/0x430 [kvm] kvm_vm_ioctl+0x53f/0x790 [kvm] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd | ||||