Filtered by vendor Redhat
Subscriptions
Filtered by product Openshift
Subscriptions
Total
1122 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-8676 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-11-14 | 7.4 High |
| A vulnerability was found in CRI-O, where it can be requested to take a checkpoint archive of a container and later be asked to restore it. When it does that restoration, it attempts to restore the mounts from the restore archive instead of the pod request. As a result, the validations run on the pod spec, verifying that the pod has access to the mounts it specifies are not applicable to a restored container. This flaw allows a malicious user to trick CRI-O into restoring a pod that doesn't have access to host mounts. The user needs access to the kubelet or cri-o socket to call the restore endpoint and trigger the restore. | ||||
| CVE-2024-3056 | 3 Fedoraproject, Podman Project, Redhat | 5 Fedora, Podman, Enterprise Linux and 2 more | 2025-11-14 | 7.7 High |
| A flaw was found in Podman. This issue may allow an attacker to create a specially crafted container that, when configured to share the same IPC with at least one other container, can create a large number of IPC resources in /dev/shm. The malicious container will continue to exhaust resources until it is out-of-memory (OOM) killed. While the malicious container's cgroup will be removed, the IPC resources it created are not. Those resources are tied to the IPC namespace that will not be removed until all containers using it are stopped, and one non-malicious container is holding the namespace open. The malicious container is restarted, either automatically or by attacker control, repeating the process and increasing the amount of memory consumed. With a container configured to restart always, such as `podman run --restart=always`, this can result in a memory-based denial of service of the system. | ||||
| CVE-2024-1725 | 1 Redhat | 6 Openshift, Openshift Container Platform, Openshift Container Platform For Arm64 and 3 more | 2025-11-14 | 6.5 Medium |
| A flaw was found in the kubevirt-csi component of OpenShift Virtualization's Hosted Control Plane (HCP). This issue could allow an authenticated attacker to gain access to the root HCP worker node's volume by creating a custom Persistent Volume that matches the name of a worker node. | ||||
| CVE-2025-3576 | 1 Redhat | 9 Ansible Automation Platform, Discovery, Enterprise Linux and 6 more | 2025-11-13 | 5.9 Medium |
| A vulnerability in the MIT Kerberos implementation allows GSSAPI-protected messages using RC4-HMAC-MD5 to be spoofed due to weaknesses in the MD5 checksum design. If RC4 is preferred over stronger encryption types, an attacker could exploit MD5 collisions to forge message integrity codes. This may lead to unauthorized message tampering. | ||||
| CVE-2025-9566 | 1 Redhat | 7 Enterprise Linux, Openshift, Openshift Devspaces and 4 more | 2025-11-13 | 8.1 High |
| There's a vulnerability in podman where an attacker may use the kube play command to overwrite host files when the kube file container a Secrete or a ConfigMap volume mount and such volume contains a symbolic link to a host file path. In a successful attack, the attacker can only control the target file to be overwritten but not the content to be written into the file. Binary-Affected: podman Upstream-version-introduced: v4.0.0 Upstream-version-fixed: v5.6.1 | ||||
| CVE-2025-12464 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-11-12 | 6.2 Medium |
| A stack-based buffer overflow was found in the QEMU e1000 network device. The code for padding short frames was dropped from individual network devices and moved to the net core code. The issue stems from the device's receive code still being able to process a short frame in loopback mode. This could lead to a buffer overrun in the e1000_receive_iov() function via the loopback code path. A malicious guest user could use this vulnerability to crash the QEMU process on the host, resulting in a denial of service. | ||||
| CVE-2024-45777 | 2 Gnu, Redhat | 3 Grub2, Enterprise Linux, Openshift | 2025-11-11 | 6.7 Medium |
| A flaw was found in grub2. The calculation of the translation buffer when reading a language .mo file in grub_gettext_getstr_from_position() may overflow, leading to a Out-of-bound write. This issue can be leveraged by an attacker to overwrite grub2's sensitive heap data, eventually leading to the circumvention of secure boot protections. | ||||
| CVE-2024-50312 | 1 Redhat | 2 Openshift, Openshift Container Platform | 2025-11-11 | 5.3 Medium |
| A vulnerability was found in GraphQL due to improper access controls on the GraphQL introspection query. This flaw allows unauthorized users to retrieve a comprehensive list of available queries and mutations. Exposure to this flaw increases the attack surface, as it can facilitate the discovery of flaws or errors specific to the application's GraphQL implementation. | ||||
| CVE-2024-0874 | 1 Redhat | 3 Acm, Logging, Openshift | 2025-11-11 | 5.3 Medium |
| A flaw was found in coredns. This issue could lead to invalid cache entries returning due to incorrectly implemented caching. | ||||
| CVE-2024-6409 | 1 Redhat | 4 Enterprise Linux, Openshift, Rhel E4s and 1 more | 2025-11-11 | 7 High |
| A race condition vulnerability was discovered in how signals are handled by OpenSSH's server (sshd). If a remote attacker does not authenticate within a set time period, then sshd's SIGALRM handler is called asynchronously. However, this signal handler calls various functions that are not async-signal-safe, for example, syslog(). As a consequence of a successful attack, in the worst case scenario, an attacker may be able to perform a remote code execution (RCE) as an unprivileged user running the sshd server. | ||||
| CVE-2024-6508 | 1 Redhat | 1 Openshift | 2025-11-11 | 8 High |
| An insufficient entropy vulnerability was found in the Openshift Console. In the authorization code type and implicit grant type, the OAuth2 protocol is vulnerable to a Cross-Site Request Forgery (CSRF) attack if the state parameter is used inefficiently. This flaw allows logging into the victim’s current application account using a third-party account without any restrictions. | ||||
| CVE-2024-5037 | 1 Redhat | 4 Logging, Openshift, Openshift Container Platform and 1 more | 2025-11-11 | 7.5 High |
| A flaw was found in OpenShift's Telemeter. If certain conditions are in place, an attacker can use a forged token to bypass the issue ("iss") check during JSON web token (JWT) authentication. | ||||
| CVE-2024-45496 | 1 Redhat | 1 Openshift | 2025-11-11 | 9.9 Critical |
| A flaw was found in OpenShift. This issue occurs due to the misuse of elevated privileges in the OpenShift Container Platform's build process. During the build initialization step, the git-clone container is run with a privileged security context, allowing unrestricted access to the node. An attacker with developer-level access can provide a crafted .gitconfig file containing commands executed during the cloning process, leading to arbitrary command execution on the worker node. An attacker running code in a privileged container could escalate their permissions on the node running the container. | ||||
| CVE-2024-7387 | 1 Redhat | 1 Openshift | 2025-11-11 | 9.1 Critical |
| A flaw was found in openshift/builder. This vulnerability allows command injection via path traversal, where a malicious user can execute arbitrary commands on the OpenShift node running the builder container. When using the “Docker” strategy, executable files inside the privileged build container can be overridden using the `spec.source.secrets.secret.destinationDir` attribute of the `BuildConfig` definition. An attacker running code in a privileged container could escalate their permissions on the node running the container. | ||||
| CVE-2024-52615 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-11-11 | 5.3 Medium |
| A flaw was found in Avahi-daemon, which relies on fixed source ports for wide-area DNS queries. This issue simplifies attacks where malicious DNS responses are injected. | ||||
| CVE-2024-45781 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-11-11 | 6.7 Medium |
| A flaw was found in grub2. When reading a symbolic link's name from a UFS filesystem, grub2 fails to validate the string length taken as an input. The lack of validation may lead to a heap out-of-bounds write, causing data integrity issues and eventually allowing an attacker to circumvent secure boot protections. | ||||
| CVE-2024-45776 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-11-11 | 6.7 Medium |
| When reading the language .mo file in grub_mofile_open(), grub2 fails to verify an integer overflow when allocating its internal buffer. A crafted .mo file may lead the buffer size calculation to overflow, leading to out-of-bound reads and writes. This flaw allows an attacker to leak sensitive data or overwrite critical data, possibly circumventing secure boot protections. | ||||
| CVE-2025-8283 | 1 Redhat | 3 Enterprise Linux, Openshift, Openshift Container Platform | 2025-11-07 | 3.7 Low |
| A vulnerability was found in the netavark package, a network stack for containers used with Podman. Due to dns.podman search domain being removed, netavark may return external servers if a valid A/AAAA record is sent as a response. When creating a container with a given name, this name will be used as the hostname for the container itself, as the podman's search domain is not added anymore the container is using the host's resolv.conf, and the DNS resolver will try to look into the search domains contained on it. If one of the domains contain a name with the same hostname as the running container, the connection will forward to unexpected external servers. | ||||
| CVE-2025-8556 | 1 Redhat | 23 Acm, Advanced Cluster Security, Ceph Storage and 20 more | 2025-11-07 | 3.7 Low |
| A flaw was found in CIRCL's implementation of the FourQ elliptic curve. This vulnerability allows an attacker to compromise session security via low-order point injection and incorrect point validation during Diffie-Hellman key exchange. | ||||
| CVE-2019-7609 | 2 Elastic, Redhat | 3 Kibana, Openshift, Openshift Container Platform | 2025-11-07 | 9.8 Critical |
| Kibana versions before 5.6.15 and 6.6.1 contain an arbitrary code execution flaw in the Timelion visualizer. An attacker with access to the Timelion application could send a request that will attempt to execute javascript code. This could possibly lead to an attacker executing arbitrary commands with permissions of the Kibana process on the host system. | ||||