Filtered by vendor Linux
Subscriptions
Total
17391 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68257 | 1 Linux | 1 Linux Kernel | 2026-02-09 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: comedi: check device's attached status in compat ioctls Syzbot identified an issue [1] that crashes kernel, seemingly due to unexistent callback dev->get_valid_routes(). By all means, this should not occur as said callback must always be set to get_zero_valid_routes() in __comedi_device_postconfig(). As the crash seems to appear exclusively in i386 kernels, at least, judging from [1] reports, the blame lies with compat versions of standard IOCTL handlers. Several of them are modified and do not use comedi_unlocked_ioctl(). While functionality of these ioctls essentially copy their original versions, they do not have required sanity check for device's attached status. This, in turn, leads to a possibility of calling select IOCTLs on a device that has not been properly setup, even via COMEDI_DEVCONFIG. Doing so on unconfigured devices means that several crucial steps are missed, for instance, specifying dev->get_valid_routes() callback. Fix this somewhat crudely by ensuring device's attached status before performing any ioctls, improving logic consistency between modern and compat functions. [1] Syzbot report: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... CR2: ffffffffffffffd6 CR3: 000000006c717000 CR4: 0000000000352ef0 Call Trace: <TASK> get_valid_routes drivers/comedi/comedi_fops.c:1322 [inline] parse_insn+0x78c/0x1970 drivers/comedi/comedi_fops.c:1401 do_insnlist_ioctl+0x272/0x700 drivers/comedi/comedi_fops.c:1594 compat_insnlist drivers/comedi/comedi_fops.c:3208 [inline] comedi_compat_ioctl+0x810/0x990 drivers/comedi/comedi_fops.c:3273 __do_compat_sys_ioctl fs/ioctl.c:695 [inline] __se_compat_sys_ioctl fs/ioctl.c:638 [inline] __ia32_compat_sys_ioctl+0x242/0x370 fs/ioctl.c:638 do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] ... | ||||
| CVE-2025-68256 | 1 Linux | 1 Linux Kernel | 2026-02-09 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix out-of-bounds read in rtw_get_ie() parser The Information Element (IE) parser rtw_get_ie() trusted the length byte of each IE without validating that the IE body (len bytes after the 2-byte header) fits inside the remaining frame buffer. A malformed frame can advertise an IE length larger than the available data, causing the parser to increment its pointer beyond the buffer end. This results in out-of-bounds reads or, depending on the pattern, an infinite loop. Fix by validating that (offset + 2 + len) does not exceed the limit before accepting the IE or advancing to the next element. This prevents OOB reads and ensures the parser terminates safely on malformed frames. | ||||
| CVE-2025-68255 | 1 Linux | 1 Linux Kernel | 2026-02-09 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix stack buffer overflow in OnAssocReq IE parsing The Supported Rates IE length from an incoming Association Request frame was used directly as the memcpy() length when copying into a fixed-size 16-byte stack buffer (supportRate). A malicious station can advertise an IE length larger than 16 bytes, causing a stack buffer overflow. Clamp ie_len to the buffer size before copying the Supported Rates IE, and correct the bounds check when merging Extended Supported Rates to prevent a second potential overflow. This prevents kernel stack corruption triggered by malformed association requests. | ||||
| CVE-2025-68254 | 1 Linux | 1 Linux Kernel | 2026-02-09 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix out-of-bounds read in OnBeacon ESR IE parsing The Extended Supported Rates (ESR) IE handling in OnBeacon accessed *(p + 1 + ielen) and *(p + 2 + ielen) without verifying that these offsets lie within the received frame buffer. A malformed beacon with an ESR IE positioned at the end of the buffer could cause an out-of-bounds read, potentially triggering a kernel panic. Add a boundary check to ensure that the ESR IE body and the subsequent bytes are within the limits of the frame before attempting to access them. This prevents OOB reads caused by malformed beacon frames. | ||||
| CVE-2025-22083 | 1 Linux | 1 Linux Kernel | 2026-02-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: Fix handling of multiple calls to vhost_scsi_set_endpoint If vhost_scsi_set_endpoint is called multiple times without a vhost_scsi_clear_endpoint between them, we can hit multiple bugs found by Haoran Zhang: 1. Use-after-free when no tpgs are found: This fixes a use after free that occurs when vhost_scsi_set_endpoint is called more than once and calls after the first call do not find any tpgs to add to the vs_tpg. When vhost_scsi_set_endpoint first finds tpgs to add to the vs_tpg array match=true, so we will do: vhost_vq_set_backend(vq, vs_tpg); ... kfree(vs->vs_tpg); vs->vs_tpg = vs_tpg; If vhost_scsi_set_endpoint is called again and no tpgs are found match=false so we skip the vhost_vq_set_backend call leaving the pointer to the vs_tpg we then free via: kfree(vs->vs_tpg); vs->vs_tpg = vs_tpg; If a scsi request is then sent we do: vhost_scsi_handle_vq -> vhost_scsi_get_req -> vhost_vq_get_backend which sees the vs_tpg we just did a kfree on. 2. Tpg dir removal hang: This patch fixes an issue where we cannot remove a LIO/target layer tpg (and structs above it like the target) dir due to the refcount dropping to -1. The problem is that if vhost_scsi_set_endpoint detects a tpg is already in the vs->vs_tpg array or if the tpg has been removed so target_depend_item fails, the undepend goto handler will do target_undepend_item on all tpgs in the vs_tpg array dropping their refcount to 0. At this time vs_tpg contains both the tpgs we have added in the current vhost_scsi_set_endpoint call as well as tpgs we added in previous calls which are also in vs->vs_tpg. Later, when vhost_scsi_clear_endpoint runs it will do target_undepend_item on all the tpgs in the vs->vs_tpg which will drop their refcount to -1. Userspace will then not be able to remove the tpg and will hang when it tries to do rmdir on the tpg dir. 3. Tpg leak: This fixes a bug where we can leak tpgs and cause them to be un-removable because the target name is overwritten when vhost_scsi_set_endpoint is called multiple times but with different target names. The bug occurs if a user has called VHOST_SCSI_SET_ENDPOINT and setup a vhost-scsi device to target/tpg mapping, then calls VHOST_SCSI_SET_ENDPOINT again with a new target name that has tpgs we haven't seen before (target1 has tpg1 but target2 has tpg2). When this happens we don't teardown the old target tpg mapping and just overwrite the target name and the vs->vs_tpg array. Later when we do vhost_scsi_clear_endpoint, we are passed in either target1 or target2's name and we will only match that target's tpgs when we loop over the vs->vs_tpg. We will then return from the function without doing target_undepend_item on the tpgs. Because of all these bugs, it looks like being able to call vhost_scsi_set_endpoint multiple times was never supported. The major user, QEMU, already has checks to prevent this use case. So to fix the issues, this patch prevents vhost_scsi_set_endpoint from being called if it's already successfully added tpgs. To add, remove or change the tpg config or target name, you must do a vhost_scsi_clear_endpoint first. | ||||
| CVE-2025-21979 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-02-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: cancel wiphy_work before freeing wiphy A wiphy_work can be queued from the moment the wiphy is allocated and initialized (i.e. wiphy_new_nm). When a wiphy_work is queued, the rdev::wiphy_work is getting queued. If wiphy_free is called before the rdev::wiphy_work had a chance to run, the wiphy memory will be freed, and then when it eventally gets to run it'll use invalid memory. Fix this by canceling the work before freeing the wiphy. | ||||
| CVE-2024-58096 | 1 Linux | 1 Linux Kernel | 2026-02-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: add srng->lock for ath11k_hal_srng_* in monitor mode ath11k_hal_srng_* should be used with srng->lock to protect srng data. For ath11k_dp_rx_mon_dest_process() and ath11k_dp_full_mon_process_rx(), they use ath11k_hal_srng_* for many times but never call srng->lock. So when running (full) monitor mode, warning will occur: RIP: 0010:ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k] Call Trace: ? ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k] ath11k_dp_rx_process_mon_status+0xc45/0x1190 [ath11k] ? idr_alloc_u32+0x97/0xd0 ath11k_dp_rx_process_mon_rings+0x32a/0x550 [ath11k] ath11k_dp_service_srng+0x289/0x5a0 [ath11k] ath11k_pcic_ext_grp_napi_poll+0x30/0xd0 [ath11k] __napi_poll+0x30/0x1f0 net_rx_action+0x198/0x320 __do_softirq+0xdd/0x319 So add srng->lock for them to avoid such warnings. Inorder to fetch the srng->lock, should change srng's definition from 'void' to 'struct hal_srng'. And initialize them elsewhere to prevent one line of code from being too long. This is consistent with other ring process functions, such as ath11k_dp_process_rx(). Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2024-57994 | 1 Linux | 1 Linux Kernel | 2026-02-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ptr_ring: do not block hard interrupts in ptr_ring_resize_multiple() Jakub added a lockdep_assert_no_hardirq() check in __page_pool_put_page() to increase test coverage. syzbot found a splat caused by hard irq blocking in ptr_ring_resize_multiple() [1] As current users of ptr_ring_resize_multiple() do not require hard irqs being masked, replace it to only block BH. Rename helpers to better reflect they are safe against BH only. - ptr_ring_resize_multiple() to ptr_ring_resize_multiple_bh() - skb_array_resize_multiple() to skb_array_resize_multiple_bh() [1] WARNING: CPU: 1 PID: 9150 at net/core/page_pool.c:709 __page_pool_put_page net/core/page_pool.c:709 [inline] WARNING: CPU: 1 PID: 9150 at net/core/page_pool.c:709 page_pool_put_unrefed_netmem+0x157/0xa40 net/core/page_pool.c:780 Modules linked in: CPU: 1 UID: 0 PID: 9150 Comm: syz.1.1052 Not tainted 6.11.0-rc3-syzkaller-00202-gf8669d7b5f5d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:__page_pool_put_page net/core/page_pool.c:709 [inline] RIP: 0010:page_pool_put_unrefed_netmem+0x157/0xa40 net/core/page_pool.c:780 Code: 74 0e e8 7c aa fb f7 eb 43 e8 75 aa fb f7 eb 3c 65 8b 1d 38 a8 6a 76 31 ff 89 de e8 a3 ae fb f7 85 db 74 0b e8 5a aa fb f7 90 <0f> 0b 90 eb 1d 65 8b 1d 15 a8 6a 76 31 ff 89 de e8 84 ae fb f7 85 RSP: 0018:ffffc9000bda6b58 EFLAGS: 00010083 RAX: ffffffff8997e523 RBX: 0000000000000000 RCX: 0000000000040000 RDX: ffffc9000fbd0000 RSI: 0000000000001842 RDI: 0000000000001843 RBP: 0000000000000000 R08: ffffffff8997df2c R09: 1ffffd40003a000d R10: dffffc0000000000 R11: fffff940003a000e R12: ffffea0001d00040 R13: ffff88802e8a4000 R14: dffffc0000000000 R15: 00000000ffffffff FS: 00007fb7aaf716c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa15a0d4b72 CR3: 00000000561b0000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tun_ptr_free drivers/net/tun.c:617 [inline] __ptr_ring_swap_queue include/linux/ptr_ring.h:571 [inline] ptr_ring_resize_multiple_noprof include/linux/ptr_ring.h:643 [inline] tun_queue_resize drivers/net/tun.c:3694 [inline] tun_device_event+0xaaf/0x1080 drivers/net/tun.c:3714 notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93 call_netdevice_notifiers_extack net/core/dev.c:2032 [inline] call_netdevice_notifiers net/core/dev.c:2046 [inline] dev_change_tx_queue_len+0x158/0x2a0 net/core/dev.c:9024 do_setlink+0xff6/0x41f0 net/core/rtnetlink.c:2923 rtnl_setlink+0x40d/0x5a0 net/core/rtnetlink.c:3201 rtnetlink_rcv_msg+0x73f/0xcf0 net/core/rtnetlink.c:6647 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2550 | ||||
| CVE-2024-26655 | 1 Linux | 1 Linux Kernel | 2026-02-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Fix memory leak in posix_clock_open() If the clk ops.open() function returns an error, we don't release the pccontext we allocated for this clock. Re-organize the code slightly to make it all more obvious. | ||||
| CVE-2023-53662 | 1 Linux | 1 Linux Kernel | 2026-02-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix memory leaks in ext4_fname_{setup_filename,prepare_lookup} If the filename casefolding fails, we'll be leaking memory from the fscrypt_name struct, namely from the 'crypto_buf.name' member. Make sure we free it in the error path on both ext4_fname_setup_filename() and ext4_fname_prepare_lookup() functions. | ||||
| CVE-2023-53520 | 1 Linux | 1 Linux Kernel | 2026-02-06 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix hci_suspend_sync crash If hci_unregister_dev() frees the hci_dev object but hci_suspend_notifier may still be accessing it, it can cause the program to crash. Here's the call trace: <4>[102152.653246] Call Trace: <4>[102152.653254] hci_suspend_sync+0x109/0x301 [bluetooth] <4>[102152.653259] hci_suspend_dev+0x78/0xcd [bluetooth] <4>[102152.653263] hci_suspend_notifier+0x42/0x7a [bluetooth] <4>[102152.653268] notifier_call_chain+0x43/0x6b <4>[102152.653271] __blocking_notifier_call_chain+0x48/0x69 <4>[102152.653273] __pm_notifier_call_chain+0x22/0x39 <4>[102152.653276] pm_suspend+0x287/0x57c <4>[102152.653278] state_store+0xae/0xe5 <4>[102152.653281] kernfs_fop_write+0x109/0x173 <4>[102152.653284] __vfs_write+0x16f/0x1a2 <4>[102152.653287] ? selinux_file_permission+0xca/0x16f <4>[102152.653289] ? security_file_permission+0x36/0x109 <4>[102152.653291] vfs_write+0x114/0x21d <4>[102152.653293] __x64_sys_write+0x7b/0xdb <4>[102152.653296] do_syscall_64+0x59/0x194 <4>[102152.653299] entry_SYSCALL_64_after_hwframe+0x5c/0xc1 This patch holds the reference count of the hci_dev object while processing it in hci_suspend_notifier to avoid potential crash caused by the race condition. | ||||
| CVE-2023-53421 | 1 Linux | 1 Linux Kernel | 2026-02-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: Reinit blkg_iostat_set after clearing in blkcg_reset_stats() When blkg_alloc() is called to allocate a blkcg_gq structure with the associated blkg_iostat_set's, there are 2 fields within blkg_iostat_set that requires proper initialization - blkg & sync. The former field was introduced by commit 3b8cc6298724 ("blk-cgroup: Optimize blkcg_rstat_flush()") while the later one was introduced by commit f73316482977 ("blk-cgroup: reimplement basic IO stats using cgroup rstat"). Unfortunately those fields in the blkg_iostat_set's are not properly re-initialized when they are cleared in v1's blkcg_reset_stats(). This can lead to a kernel panic due to NULL pointer access of the blkg pointer. The missing initialization of sync is less problematic and can be a problem in a debug kernel due to missing lockdep initialization. Fix these problems by re-initializing them after memory clearing. | ||||
| CVE-2022-50535 | 1 Linux | 1 Linux Kernel | 2026-02-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential null-deref in dm_resume [Why] Fixing smatch error: dm_resume() error: we previously assumed 'aconnector->dc_link' could be null [How] Check if dc_link null at the beginning of the loop, so further checks can be dropped. | ||||
| CVE-2022-50554 | 1 Linux | 1 Linux Kernel | 2026-02-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: avoid double ->queue_rq() because of early timeout David Jeffery found one double ->queue_rq() issue, so far it can be triggered in VM use case because of long vmexit latency or preempt latency of vCPU pthread or long page fault in vCPU pthread, then block IO req could be timed out before queuing the request to hardware but after calling blk_mq_start_request() during ->queue_rq(), then timeout handler may handle it by requeue, then double ->queue_rq() is caused, and kernel panic. So far, it is driver's responsibility to cover the race between timeout and completion, so it seems supposed to be solved in driver in theory, given driver has enough knowledge. But it is really one common problem, lots of driver could have similar issue, and could be hard to fix all affected drivers, even it isn't easy for driver to handle the race. So David suggests this patch by draining in-progress ->queue_rq() for solving this issue. | ||||
| CVE-2023-53609 | 1 Linux | 1 Linux Kernel | 2026-02-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: Revert "scsi: core: Do not increase scsi_device's iorequest_cnt if dispatch failed" The "atomic_inc(&cmd->device->iorequest_cnt)" in scsi_queue_rq() would cause kernel panic because cmd->device may be freed after returning from scsi_dispatch_cmd(). This reverts commit cfee29ffb45b1c9798011b19d454637d1b0fe87d. | ||||
| CVE-2023-53610 | 1 Linux | 1 Linux Kernel | 2026-02-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: irqchip: Fix refcount leak in platform_irqchip_probe of_irq_find_parent() returns a node pointer with refcount incremented, We should use of_node_put() on it when not needed anymore. Add missing of_node_put() to avoid refcount leak. | ||||
| CVE-2023-53611 | 1 Linux | 1 Linux Kernel | 2026-02-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipmi_si: fix a memleak in try_smi_init() Kmemleak reported the following leak info in try_smi_init(): unreferenced object 0xffff00018ecf9400 (size 1024): comm "modprobe", pid 2707763, jiffies 4300851415 (age 773.308s) backtrace: [<000000004ca5b312>] __kmalloc+0x4b8/0x7b0 [<00000000953b1072>] try_smi_init+0x148/0x5dc [ipmi_si] [<000000006460d325>] 0xffff800081b10148 [<0000000039206ea5>] do_one_initcall+0x64/0x2a4 [<00000000601399ce>] do_init_module+0x50/0x300 [<000000003c12ba3c>] load_module+0x7a8/0x9e0 [<00000000c246fffe>] __se_sys_init_module+0x104/0x180 [<00000000eea99093>] __arm64_sys_init_module+0x24/0x30 [<0000000021b1ef87>] el0_svc_common.constprop.0+0x94/0x250 [<0000000070f4f8b7>] do_el0_svc+0x48/0xe0 [<000000005a05337f>] el0_svc+0x24/0x3c [<000000005eb248d6>] el0_sync_handler+0x160/0x164 [<0000000030a59039>] el0_sync+0x160/0x180 The problem was that when an error occurred before handlers registration and after allocating `new_smi->si_sm`, the variable wouldn't be freed in the error handling afterwards since `shutdown_smi()` hadn't been registered yet. Fix it by adding a `kfree()` in the error handling path in `try_smi_init()`. | ||||
| CVE-2023-53612 | 1 Linux | 1 Linux Kernel | 2026-02-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (coretemp) Simplify platform device handling Coretemp's platform driver is unconventional. All the real work is done globally by the initcall and CPU hotplug notifiers, while the "driver" effectively just wraps an allocation and the registration of the hwmon interface in a long-winded round-trip through the driver core. The whole logic of dynamically creating and destroying platform devices to bring the interfaces up and down is error prone, since it assumes platform_device_add() will synchronously bind the driver and set drvdata before it returns, thus results in a NULL dereference if drivers_autoprobe is turned off for the platform bus. Furthermore, the unusual approach of doing that from within a CPU hotplug notifier, already commented in the code that it deadlocks suspend, also causes lockdep issues for other drivers or subsystems which may want to legitimately register a CPU hotplug notifier from a platform bus notifier. All of these issues can be solved by ripping this unusual behaviour out completely, simply tying the platform devices to the lifetime of the module itself, and directly managing the hwmon interfaces from the hotplug notifiers. There is a slight user-visible change in that /sys/bus/platform/drivers/coretemp will no longer appear, and /sys/devices/platform/coretemp.n will remain present if package n is hotplugged off, but hwmon users should really only be looking for the presence of the hwmon interfaces, whose behaviour remains unchanged. | ||||
| CVE-2022-50555 | 1 Linux | 1 Linux Kernel | 2026-02-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix a null-ptr-deref in tipc_topsrv_accept syzbot found a crash in tipc_topsrv_accept: KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] Workqueue: tipc_rcv tipc_topsrv_accept RIP: 0010:kernel_accept+0x22d/0x350 net/socket.c:3487 Call Trace: <TASK> tipc_topsrv_accept+0x197/0x280 net/tipc/topsrv.c:460 process_one_work+0x991/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 It was caused by srv->listener that might be set to null by tipc_topsrv_stop() in net .exit whereas it's still used in tipc_topsrv_accept() worker. srv->listener is protected by srv->idr_lock in tipc_topsrv_stop(), so add a check for srv->listener under srv->idr_lock in tipc_topsrv_accept() to avoid the null-ptr-deref. To ensure the lsock is not released during the tipc_topsrv_accept(), move sock_release() after tipc_topsrv_work_stop() where it's waiting until the tipc_topsrv_accept worker to be done. Note that sk_callback_lock is used to protect sk->sk_user_data instead of srv->listener, and it should check srv in tipc_topsrv_listener_data_ready() instead. This also ensures that no more tipc_topsrv_accept worker will be started after tipc_conn_close() is called in tipc_topsrv_stop() where it sets sk->sk_user_data to null. | ||||
| CVE-2023-53617 | 1 Linux | 1 Linux Kernel | 2026-02-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: aspeed: socinfo: Add kfree for kstrdup Add kfree() in the later error handling in order to avoid memory leak. | ||||