Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
15837 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-53333 | 1 Linux | 1 Linux Kernel | 2025-12-10 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: dccp: copy entire header to stack buffer, not just basic one Eric Dumazet says: nf_conntrack_dccp_packet() has an unique: dh = skb_header_pointer(skb, dataoff, sizeof(_dh), &_dh); And nothing more is 'pulled' from the packet, depending on the content. dh->dccph_doff, and/or dh->dccph_x ...) So dccp_ack_seq() is happily reading stuff past the _dh buffer. BUG: KASAN: stack-out-of-bounds in nf_conntrack_dccp_packet+0x1134/0x11c0 Read of size 4 at addr ffff000128f66e0c by task syz-executor.2/29371 [..] Fix this by increasing the stack buffer to also include room for the extra sequence numbers and all the known dccp packet type headers, then pull again after the initial validation of the basic header. While at it, mark packets invalid that lack 48bit sequence bit but where RFC says the type MUST use them. Compile tested only. v2: first skb_header_pointer() now needs to adjust the size to only pull the generic header. (Eric) Heads-up: I intend to remove dccp conntrack support later this year. | ||||
| CVE-2023-53334 | 1 Linux | 1 Linux Kernel | 2025-12-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: chipidea: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. | ||||
| CVE-2023-53322 | 1 Linux | 1 Linux Kernel | 2025-12-10 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Wait for io return on terminate rport System crash due to use after free. Current code allows terminate_rport_io to exit before making sure all IOs has returned. For FCP-2 device, IO's can hang on in HW because driver has not tear down the session in FW at first sign of cable pull. When dev_loss_tmo timer pops, terminate_rport_io is called and upper layer is about to free various resources. Terminate_rport_io trigger qla to do the final cleanup, but the cleanup might not be fast enough where it leave qla still holding on to the same resource. Wait for IO's to return to upper layer before resources are freed. | ||||
| CVE-2022-50364 | 1 Linux | 1 Linux Kernel | 2025-12-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: mux: reg: check return value after calling platform_get_resource() It will cause null-ptr-deref in resource_size(), if platform_get_resource() returns NULL, move calling resource_size() after devm_ioremap_resource() that will check 'res' to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code. | ||||
| CVE-2022-50366 | 1 Linux | 1 Linux Kernel | 2025-12-10 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue When value < time_unit, the parameter of ilog2() will be zero and the return value is -1. u64(-1) is too large for shift exponent and then will trigger shift-out-of-bounds: shift exponent 18446744073709551615 is too large for 32-bit type 'int' Call Trace: rapl_compute_time_window_core rapl_write_data_raw set_time_window store_constraint_time_window_us | ||||
| CVE-2022-50367 | 1 Linux | 1 Linux Kernel | 2025-12-10 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs: fix UAF/GPF bug in nilfs_mdt_destroy In alloc_inode, inode_init_always() could return -ENOMEM if security_inode_alloc() fails, which causes inode->i_private uninitialized. Then nilfs_is_metadata_file_inode() returns true and nilfs_free_inode() wrongly calls nilfs_mdt_destroy(), which frees the uninitialized inode->i_private and leads to crashes(e.g., UAF/GPF). Fix this by moving security_inode_alloc just prior to this_cpu_inc(nr_inodes) | ||||
| CVE-2022-50360 | 1 Linux | 1 Linux Kernel | 2025-12-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: fix aux-bus EP lifetime Device-managed resources allocated post component bind must be tied to the lifetime of the aggregate DRM device or they will not necessarily be released when binding of the aggregate device is deferred. This can lead resource leaks or failure to bind the aggregate device when binding is later retried and a second attempt to allocate the resources is made. For the DP aux-bus, an attempt to populate the bus a second time will simply fail ("DP AUX EP device already populated"). Fix this by tying the lifetime of the EP device to the DRM device rather than DP controller platform device. Patchwork: https://patchwork.freedesktop.org/patch/502672/ | ||||
| CVE-2022-50358 | 1 Linux | 1 Linux Kernel | 2025-12-10 | 4.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: brcmfmac: return error when getting invalid max_flowrings from dongle When firmware hit trap at initialization, host will read abnormal max_flowrings number from dongle, and it will cause kernel panic when doing iowrite to initialize dongle ring. To detect this error at early stage, we directly return error when getting invalid max_flowrings(>256). | ||||
| CVE-2022-50353 | 1 Linux | 1 Linux Kernel | 2025-12-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: wmt-sdmmc: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and goto error path which will call mmc_free_host(), besides, clk_disable_unprepare() also needs be called. | ||||
| CVE-2022-50354 | 1 Linux | 1 Linux Kernel | 2025-12-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix kfd_process_device_init_vm error handling Should only destroy the ib_mem and let process cleanup worker to free the outstanding BOs. Reset the pointer in pdd->qpd structure, to avoid NULL pointer access in process destroy worker. BUG: kernel NULL pointer dereference, address: 0000000000000010 Call Trace: amdgpu_amdkfd_gpuvm_unmap_gtt_bo_from_kernel+0x46/0xb0 [amdgpu] kfd_process_device_destroy_cwsr_dgpu+0x40/0x70 [amdgpu] kfd_process_destroy_pdds+0x71/0x190 [amdgpu] kfd_process_wq_release+0x2a2/0x3b0 [amdgpu] process_one_work+0x2a1/0x600 worker_thread+0x39/0x3d0 | ||||
| CVE-2022-50355 | 1 Linux | 1 Linux Kernel | 2025-12-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: vt6655: fix some erroneous memory clean-up loops In some initialization functions of this driver, memory is allocated with 'i' acting as an index variable and increasing from 0. The commit in "Fixes" introduces some clean-up codes in case of allocation failure, which free memory in reverse order with 'i' decreasing to 0. However, there are some problems: - The case i=0 is left out. Thus memory is leaked. - In case memory allocation fails right from the start, the memory freeing loops will start with i=-1 and invalid memory locations will be accessed. One of these loops has been fixed in commit c8ff91535880 ("staging: vt6655: fix potential memory leak"). Fix the remaining erroneous loops. | ||||
| CVE-2022-50356 | 1 Linux | 1 Linux Kernel | 2025-12-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: sched: sfb: fix null pointer access issue when sfb_init() fails When the default qdisc is sfb, if the qdisc of dev_queue fails to be inited during mqprio_init(), sfb_reset() is invoked to clear resources. In this case, the q->qdisc is NULL, and it will cause gpf issue. The process is as follows: qdisc_create_dflt() sfb_init() tcf_block_get() --->failed, q->qdisc is NULL ... qdisc_put() ... sfb_reset() qdisc_reset(q->qdisc) --->q->qdisc is NULL ops = qdisc->ops The following is the Call Trace information: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] RIP: 0010:qdisc_reset+0x2b/0x6f0 Call Trace: <TASK> sfb_reset+0x37/0xd0 qdisc_reset+0xed/0x6f0 qdisc_destroy+0x82/0x4c0 qdisc_put+0x9e/0xb0 qdisc_create_dflt+0x2c3/0x4a0 mqprio_init+0xa71/0x1760 qdisc_create+0x3eb/0x1000 tc_modify_qdisc+0x408/0x1720 rtnetlink_rcv_msg+0x38e/0xac0 netlink_rcv_skb+0x12d/0x3a0 netlink_unicast+0x4a2/0x740 netlink_sendmsg+0x826/0xcc0 sock_sendmsg+0xc5/0x100 ____sys_sendmsg+0x583/0x690 ___sys_sendmsg+0xe8/0x160 __sys_sendmsg+0xbf/0x160 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f2164122d04 </TASK> | ||||
| CVE-2023-53345 | 1 Linux | 1 Linux Kernel | 2025-12-10 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix potential data race in rxrpc_wait_to_be_connected() Inside the loop in rxrpc_wait_to_be_connected() it checks call->error to see if it should exit the loop without first checking the call state. This is probably safe as if call->error is set, the call is dead anyway, but we should probably wait for the call state to have been set to completion first, lest it cause surprise on the way out. Fix this by only accessing call->error if the call is complete. We don't actually need to access the error inside the loop as we'll do that after. This caused the following report: BUG: KCSAN: data-race in rxrpc_send_data / rxrpc_set_call_completion write to 0xffff888159cf3c50 of 4 bytes by task 25673 on cpu 1: rxrpc_set_call_completion+0x71/0x1c0 net/rxrpc/call_state.c:22 rxrpc_send_data_packet+0xba9/0x1650 net/rxrpc/output.c:479 rxrpc_transmit_one+0x1e/0x130 net/rxrpc/output.c:714 rxrpc_decant_prepared_tx net/rxrpc/call_event.c:326 [inline] rxrpc_transmit_some_data+0x496/0x600 net/rxrpc/call_event.c:350 rxrpc_input_call_event+0x564/0x1220 net/rxrpc/call_event.c:464 rxrpc_io_thread+0x307/0x1d80 net/rxrpc/io_thread.c:461 kthread+0x1ac/0x1e0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 read to 0xffff888159cf3c50 of 4 bytes by task 25672 on cpu 0: rxrpc_send_data+0x29e/0x1950 net/rxrpc/sendmsg.c:296 rxrpc_do_sendmsg+0xb7a/0xc20 net/rxrpc/sendmsg.c:726 rxrpc_sendmsg+0x413/0x520 net/rxrpc/af_rxrpc.c:565 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0x375/0x4c0 net/socket.c:2501 ___sys_sendmsg net/socket.c:2555 [inline] __sys_sendmmsg+0x263/0x500 net/socket.c:2641 __do_sys_sendmmsg net/socket.c:2670 [inline] __se_sys_sendmmsg net/socket.c:2667 [inline] __x64_sys_sendmmsg+0x57/0x60 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00000000 -> 0xffffffea | ||||
| CVE-2021-47147 | 1 Linux | 1 Linux Kernel | 2025-12-10 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ptp: ocp: Fix a resource leak in an error handling path If an error occurs after a successful 'pci_ioremap_bar()' call, it must be undone by a corresponding 'pci_iounmap()' call, as already done in the remove function. | ||||
| CVE-2021-46906 | 1 Linux | 1 Linux Kernel | 2025-12-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: usbhid: fix info leak in hid_submit_ctrl In hid_submit_ctrl(), the way of calculating the report length doesn't take into account that report->size can be zero. When running the syzkaller reproducer, a report of size 0 causes hid_submit_ctrl) to calculate transfer_buffer_length as 16384. When this urb is passed to the usb core layer, KMSAN reports an info leak of 16384 bytes. To fix this, first modify hid_report_len() to account for the zero report size case by using DIV_ROUND_UP for the division. Then, call it from hid_submit_ctrl(). | ||||
| CVE-2021-47206 | 1 Linux | 1 Linux Kernel | 2025-12-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: host: ohci-tmio: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. | ||||
| CVE-2022-50357 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: core: fix some leaks in probe The dwc3_get_properties() function calls: dwc->usb_psy = power_supply_get_by_name(usb_psy_name); so there is some additional clean up required on these error paths. | ||||
| CVE-2022-50359 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: cx88: Fix a null-ptr-deref bug in buffer_prepare() When the driver calls cx88_risc_buffer() to prepare the buffer, the function call may fail, resulting in a empty buffer and null-ptr-deref later in buffer_queue(). The following log can reveal it: [ 41.822762] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI [ 41.824488] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 41.828027] RIP: 0010:buffer_queue+0xc2/0x500 [ 41.836311] Call Trace: [ 41.836945] __enqueue_in_driver+0x141/0x360 [ 41.837262] vb2_start_streaming+0x62/0x4a0 [ 41.838216] vb2_core_streamon+0x1da/0x2c0 [ 41.838516] __vb2_init_fileio+0x981/0xbc0 [ 41.839141] __vb2_perform_fileio+0xbf9/0x1120 [ 41.840072] vb2_fop_read+0x20e/0x400 [ 41.840346] v4l2_read+0x215/0x290 [ 41.840603] vfs_read+0x162/0x4c0 Fix this by checking the return value of cx88_risc_buffer() [hverkuil: fix coding style issues] | ||||
| CVE-2022-50361 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: add missing unregister_netdev() in wilc_netdev_ifc_init() Fault injection test reports this issue: kernel BUG at net/core/dev.c:10731! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI Call Trace: <TASK> wilc_netdev_ifc_init+0x19f/0x220 [wilc1000 884bf126e9e98af6a708f266a8dffd53f99e4bf5] wilc_cfg80211_init+0x30c/0x380 [wilc1000 884bf126e9e98af6a708f266a8dffd53f99e4bf5] wilc_bus_probe+0xad/0x2b0 [wilc1000_spi 1520a7539b6589cc6cde2ae826a523a33f8bacff] spi_probe+0xe4/0x140 really_probe+0x17e/0x3f0 __driver_probe_device+0xe3/0x170 driver_probe_device+0x49/0x120 The root case here is alloc_ordered_workqueue() fails, but cfg80211_unregister_netdevice() or unregister_netdev() not be called in error handling path. To fix add unregister_netdev goto lable to add the unregister operation in error handling path. | ||||
| CVE-2023-53841 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: devlink: report devlink_port_type_warn source device devlink_port_type_warn is scheduled for port devlink and warning when the port type is not set. But from this warning it is not easy found out which device (driver) has no devlink port set. [ 3709.975552] Type was not set for devlink port. [ 3709.975579] WARNING: CPU: 1 PID: 13092 at net/devlink/leftover.c:6775 devlink_port_type_warn+0x11/0x20 [ 3709.993967] Modules linked in: openvswitch nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nfnetlink bluetooth rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs vhost_net vhost vhost_iotlb tap tun bridge stp llc qrtr intel_rapl_msr intel_rapl_common i10nm_edac nfit libnvdimm x86_pkg_temp_thermal mlx5_ib intel_powerclamp coretemp dell_wmi ledtrig_audio sparse_keymap ipmi_ssif kvm_intel ib_uverbs rfkill ib_core video kvm iTCO_wdt acpi_ipmi intel_vsec irqbypass ipmi_si iTCO_vendor_support dcdbas ipmi_devintf mei_me ipmi_msghandler rapl mei intel_cstate isst_if_mmio isst_if_mbox_pci dell_smbios intel_uncore isst_if_common i2c_i801 dell_wmi_descriptor wmi_bmof i2c_smbus intel_pch_thermal pcspkr acpi_power_meter xfs libcrc32c sd_mod sg nvme_tcp mgag200 i2c_algo_bit nvme_fabrics drm_shmem_helper drm_kms_helper nvme syscopyarea ahci sysfillrect sysimgblt nvme_core fb_sys_fops crct10dif_pclmul libahci mlx5_core sfc crc32_pclmul nvme_common drm [ 3709.994030] crc32c_intel mtd t10_pi mlxfw libata tg3 mdio megaraid_sas psample ghash_clmulni_intel pci_hyperv_intf wmi dm_multipath sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi fuse [ 3710.108431] CPU: 1 PID: 13092 Comm: kworker/1:1 Kdump: loaded Not tainted 5.14.0-319.el9.x86_64 #1 [ 3710.108435] Hardware name: Dell Inc. PowerEdge R750/0PJ80M, BIOS 1.8.2 09/14/2022 [ 3710.108437] Workqueue: events devlink_port_type_warn [ 3710.108440] RIP: 0010:devlink_port_type_warn+0x11/0x20 [ 3710.108443] Code: 84 76 fe ff ff 48 c7 03 20 0e 1a ad 31 c0 e9 96 fd ff ff 66 0f 1f 44 00 00 0f 1f 44 00 00 48 c7 c7 18 24 4e ad e8 ef 71 62 ff <0f> 0b c3 cc cc cc cc 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f6 87 [ 3710.108445] RSP: 0018:ff3b6d2e8b3c7e90 EFLAGS: 00010282 [ 3710.108447] RAX: 0000000000000000 RBX: ff366d6580127080 RCX: 0000000000000027 [ 3710.108448] RDX: 0000000000000027 RSI: 00000000ffff86de RDI: ff366d753f41f8c8 [ 3710.108449] RBP: ff366d658ff5a0c0 R08: ff366d753f41f8c0 R09: ff3b6d2e8b3c7e18 [ 3710.108450] R10: 0000000000000001 R11: 0000000000000023 R12: ff366d753f430600 [ 3710.108451] R13: ff366d753f436900 R14: 0000000000000000 R15: ff366d753f436905 [ 3710.108452] FS: 0000000000000000(0000) GS:ff366d753f400000(0000) knlGS:0000000000000000 [ 3710.108453] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3710.108454] CR2: 00007f1c57bc74e0 CR3: 000000111d26a001 CR4: 0000000000773ee0 [ 3710.108456] PKRU: 55555554 [ 3710.108457] Call Trace: [ 3710.108458] <TASK> [ 3710.108459] process_one_work+0x1e2/0x3b0 [ 3710.108466] ? rescuer_thread+0x390/0x390 [ 3710.108468] worker_thread+0x50/0x3a0 [ 3710.108471] ? rescuer_thread+0x390/0x390 [ 3710.108473] kthread+0xdd/0x100 [ 3710.108477] ? kthread_complete_and_exit+0x20/0x20 [ 3710.108479] ret_from_fork+0x1f/0x30 [ 3710.108485] </TASK> [ 3710.108486] ---[ end trace 1b4b23cd0c65d6a0 ]--- After patch: [ 402.473064] ice 0000:41:00.0: Type was not set for devlink port. [ 402.473064] ice 0000:41:00.1: Type was not set for devlink port. | ||||