Total
12747 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2017-12235 | 1 Cisco | 31 Industrial Ethernet 2000 16ptc-g-e Switch, Industrial Ethernet 2000 16ptc-g-l Switch, Industrial Ethernet 2000 16ptc-g-nx Switch and 28 more | 2025-10-22 | 7.5 High |
| A vulnerability in the implementation of the PROFINET Discovery and Configuration Protocol (PN-DCP) for Cisco IOS 12.2 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper parsing of ingress PN-DCP Identify Request packets destined to an affected device. An attacker could exploit this vulnerability by sending a crafted PN-DCP Identify Request packet to an affected device and then continuing to send normal PN-DCP Identify Request packets to the device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. This vulnerability affects Cisco devices that are configured to process PROFINET messages. Beginning with Cisco IOS Software Release 12.2(52)SE, PROFINET is enabled by default on all the base switch module and expansion-unit Ethernet ports. Cisco Bug IDs: CSCuz47179. | ||||
| CVE-2017-12234 | 1 Cisco | 55 1000 Integrated Services Router, 1100-4g\/6g Integrated Services Router, 1100-4g Integrated Services Router and 52 more | 2025-10-22 | 7.5 High |
| Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc43709. | ||||
| CVE-2017-12233 | 1 Cisco | 55 1000 Integrated Services Router, 1100-4g\/6g Integrated Services Router, 1100-4g Integrated Services Router and 52 more | 2025-10-22 | 7.5 High |
| Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCuz95334. | ||||
| CVE-2017-0148 | 2 Microsoft, Siemens | 27 Server Message Block, Windows 10 1507, Windows 10 1511 and 24 more | 2025-10-22 | 8.1 High |
| The SMBv1 server in Microsoft Windows Vista SP2; Windows Server 2008 SP2 and R2 SP1; Windows 7 SP1; Windows 8.1; Windows Server 2012 Gold and R2; Windows RT 8.1; and Windows 10 Gold, 1511, and 1607; and Windows Server 2016 allows remote attackers to execute arbitrary code via crafted packets, aka "Windows SMB Remote Code Execution Vulnerability." This vulnerability is different from those described in CVE-2017-0143, CVE-2017-0144, CVE-2017-0145, and CVE-2017-0146. | ||||
| CVE-2016-3715 | 6 Canonical, Imagemagick, Opensuse and 3 more | 31 Ubuntu Linux, Imagemagick, Leap and 28 more | 2025-10-22 | 5.5 Medium |
| The EPHEMERAL coder in ImageMagick before 6.9.3-10 and 7.x before 7.0.1-1 allows remote attackers to delete arbitrary files via a crafted image. | ||||
| CVE-2016-3714 | 6 Canonical, Debian, Imagemagick and 3 more | 7 Ubuntu Linux, Debian Linux, Imagemagick and 4 more | 2025-10-22 | 8.4 High |
| The (1) EPHEMERAL, (2) HTTPS, (3) MVG, (4) MSL, (5) TEXT, (6) SHOW, (7) WIN, and (8) PLT coders in ImageMagick before 6.9.3-10 and 7.x before 7.0.1-1 allow remote attackers to execute arbitrary code via shell metacharacters in a crafted image, aka "ImageTragick." | ||||
| CVE-2015-2291 | 2 Intel, Microsoft | 3 Ethernet Diagnostics Driver Iqvw32.sys, Ethernet Diagnostics Driver Iqvw64.sys, Windows | 2025-10-22 | 7.8 High |
| (1) IQVW32.sys before 1.3.1.0 and (2) IQVW64.sys before 1.3.1.0 in the Intel Ethernet diagnostics driver for Windows allows local users to cause a denial of service or possibly execute arbitrary code with kernel privileges via a crafted (a) 0x80862013, (b) 0x8086200B, (c) 0x8086200F, or (d) 0x80862007 IOCTL call. | ||||
| CVE-2025-8414 | 1 Silabs | 2 Gecko Sdk, Simplicity Sdk | 2025-10-21 | N/A |
| Due to improper input validation, a buffer overflow vulnerability is present in Zigbee EZSP Host Applications. If the buffer overflows, stack corruption is possible. In certain conditions, this could lead to arbitrary code execution. Access to a network key is required to exploit this vulnerability. | ||||
| CVE-2024-7988 | 1 Rockwellautomation | 1 Thinmanager Thinserver | 2025-10-21 | 9.8 Critical |
| A remote code execution vulnerability exists in the Rockwell Automation ThinManager® ThinServer™ that allows a threat actor to execute arbitrary code with System privileges. This vulnerability exists due to the lack of proper data input validation, which allows files to be overwritten. | ||||
| CVE-2025-27040 | 1 Qualcomm | 131 Csr8811, Csr8811 Firmware, Immersive Home 214 Platform and 128 more | 2025-10-21 | 6.5 Medium |
| Information disclosure may occur while processing the hypervisor log. | ||||
| CVE-2025-31995 | 1 Hcltech | 1 Maxai Workbench | 2025-10-21 | 3.5 Low |
| HCL Unica MaxAI Workbench is vulnerable to improper input validation. This allows attackers to exploit vulnerabilities such as SQL Injection, XSS, or command injection, leading to unauthorized access or data breaches, etc. | ||||
| CVE-2022-49227 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: igc: avoid kernel warning when changing RX ring parameters Calling ethtool changing the RX ring parameters like this: $ ethtool -G eth0 rx 1024 on igc triggers kernel warnings like this: [ 225.198467] ------------[ cut here ]------------ [ 225.198473] Missing unregister, handled but fix driver [ 225.198485] WARNING: CPU: 7 PID: 959 at net/core/xdp.c:168 xdp_rxq_info_reg+0x79/0xd0 [...] [ 225.198601] Call Trace: [ 225.198604] <TASK> [ 225.198609] igc_setup_rx_resources+0x3f/0xe0 [igc] [ 225.198617] igc_ethtool_set_ringparam+0x30e/0x450 [igc] [ 225.198626] ethnl_set_rings+0x18a/0x250 [ 225.198631] genl_family_rcv_msg_doit+0xca/0x110 [ 225.198637] genl_rcv_msg+0xce/0x1c0 [ 225.198640] ? rings_prepare_data+0x60/0x60 [ 225.198644] ? genl_get_cmd+0xd0/0xd0 [ 225.198647] netlink_rcv_skb+0x4e/0xf0 [ 225.198652] genl_rcv+0x24/0x40 [ 225.198655] netlink_unicast+0x20e/0x330 [ 225.198659] netlink_sendmsg+0x23f/0x480 [ 225.198663] sock_sendmsg+0x5b/0x60 [ 225.198667] __sys_sendto+0xf0/0x160 [ 225.198671] ? handle_mm_fault+0xb2/0x280 [ 225.198676] ? do_user_addr_fault+0x1eb/0x690 [ 225.198680] __x64_sys_sendto+0x20/0x30 [ 225.198683] do_syscall_64+0x38/0x90 [ 225.198687] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 225.198693] RIP: 0033:0x7f7ae38ac3aa igc_ethtool_set_ringparam() copies the igc_ring structure but neglects to reset the xdp_rxq_info member before calling igc_setup_rx_resources(). This in turn calls xdp_rxq_info_reg() with an already registered xdp_rxq_info. Make sure to unregister the xdp_rxq_info structure first in igc_setup_rx_resources. | ||||
| CVE-2022-49266 | 1 Linux | 1 Linux Kernel | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: fix rq-qos breakage from skipping rq_qos_done_bio() a647a524a467 ("block: don't call rq_qos_ops->done_bio if the bio isn't tracked") made bio_endio() skip rq_qos_done_bio() if BIO_TRACKED is not set. While this fixed a potential oops, it also broke blk-iocost by skipping the done_bio callback for merged bios. Before, whether a bio goes through rq_qos_throttle() or rq_qos_merge(), rq_qos_done_bio() would be called on the bio on completion with BIO_TRACKED distinguishing the former from the latter. rq_qos_done_bio() is not called for bios which wenth through rq_qos_merge(). This royally confuses blk-iocost as the merged bios never finish and are considered perpetually in-flight. One reliably reproducible failure mode is an intermediate cgroup geting stuck active preventing its children from being activated due to the leaf-only rule, leading to loss of control. The following is from resctl-bench protection scenario which emulates isolating a web server like workload from a memory bomb run on an iocost configuration which should yield a reasonable level of protection. # cat /sys/block/nvme2n1/device/model Samsung SSD 970 PRO 512GB # cat /sys/fs/cgroup/io.cost.model 259:0 ctrl=user model=linear rbps=834913556 rseqiops=93622 rrandiops=102913 wbps=618985353 wseqiops=72325 wrandiops=71025 # cat /sys/fs/cgroup/io.cost.qos 259:0 enable=1 ctrl=user rpct=95.00 rlat=18776 wpct=95.00 wlat=8897 min=60.00 max=100.00 # resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1 ... Memory Hog Summary ================== IO Latency: R p50=242u:336u/2.5m p90=794u:1.4m/7.5m p99=2.7m:8.0m/62.5m max=8.0m:36.4m/350m W p50=221u:323u/1.5m p90=709u:1.2m/5.5m p99=1.5m:2.5m/9.5m max=6.9m:35.9m/350m Isolation and Request Latency Impact Distributions: min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev isol% 15.90 15.90 15.90 40.05 57.24 59.07 60.01 74.63 74.63 90.35 90.35 58.12 15.82 lat-imp% 0 0 0 0 0 4.55 14.68 15.54 233.5 548.1 548.1 53.88 143.6 Result: isol=58.12:15.82% lat_imp=53.88%:143.6 work_csv=100.0% missing=3.96% The isolation result of 58.12% is close to what this device would show without any IO control. Fix it by introducing a new flag BIO_QOS_MERGED to mark merged bios and calling rq_qos_done_bio() on them too. For consistency and clarity, rename BIO_TRACKED to BIO_QOS_THROTTLED. The flag checks are moved into rq_qos_done_bio() so that it's next to the code paths that set the flags. With the patch applied, the above same benchmark shows: # resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1 ... Memory Hog Summary ================== IO Latency: R p50=123u:84.4u/985u p90=322u:256u/2.5m p99=1.6m:1.4m/9.5m max=11.1m:36.0m/350m W p50=429u:274u/995u p90=1.7m:1.3m/4.5m p99=3.4m:2.7m/11.5m max=7.9m:5.9m/26.5m Isolation and Request Latency Impact Distributions: min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev isol% 84.91 84.91 89.51 90.73 92.31 94.49 96.36 98.04 98.71 100.0 100.0 94.42 2.81 lat-imp% 0 0 0 0 0 2.81 5.73 11.11 13.92 17.53 22.61 4.10 4.68 Result: isol=94.42:2.81% lat_imp=4.10%:4.68 work_csv=58.34% missing=0% | ||||
| CVE-2011-20001 | 1 Siemens | 3 Simatic, Simatic S7-1200, Simatic S7-1200 Cpu | 2025-10-21 | 7.5 High |
| A vulnerability has been identified in SIMATIC S7-1200 CPU V1 family (incl. SIPLUS variants) (All versions < V2.0.3), SIMATIC S7-1200 CPU V2 family (incl. SIPLUS variants) (All versions < V2.0.3). The web server interface of affected devices improperly processes incoming malformed HTTP traffic at high rate. This could allow an unauthenticated remote attacker to force the device entering the stop/defect state, thus creating a denial of service condition. | ||||
| CVE-2025-9066 | 1 Rockwellautomation | 1 Factorytalk View | 2025-10-21 | N/A |
| A security issue was discovered within FactoryTalk® ViewPoint, allowing unauthenticated attackers to achieve XXE. Certain SOAP requests can be abused to perform XXE, resulting in a temporary denial-of-service. | ||||
| CVE-2022-38150 | 2 Fedoraproject, Varnish Cache Project | 2 Fedora, Varnish Cache | 2025-10-20 | 6.5 Medium |
| In Varnish Cache 7.0.0, 7.0.1, 7.0.2, and 7.1.0, it is possible to cause the Varnish Server to assert and automatically restart through forged HTTP/1 backend responses. An attack uses a crafted reason phrase of the backend response status line. This is fixed in 7.0.3 and 7.1.1. | ||||
| CVE-2022-20350 | 1 Google | 1 Android | 2025-10-20 | 6.2 Medium |
| In onCreate of NotificationAccessConfirmationActivity.java, there is a possible way to trick the victim to grant notification access to the wrong app due to improper input validation. This could lead to local information disclosure with User execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10 Android-11 Android-12 Android-12LAndroid ID: A-228178437 | ||||
| CVE-2025-61582 | 2 Joni1802, Teamspeak3 Manager Project | 2 Ts3 Manager, Ts3 Manager | 2025-10-20 | 7.5 High |
| TS3 Manager is modern web interface for maintaining Teamspeak3 servers. A Denial of Dervice vulnerability has been identified in versions 2.2.1 and earlier. The vulnerability permits an unauthenticated actor to crash the application through the submission of specially crafted Unicode input, requiring no prior authentication or privileges. The flaw manifests when Unicode tag characters are submitted to the Server field on the login page. The application fails to properly handle these characters during the ASCII conversion process, resulting in an unhandled exception that terminates the application within four to five seconds of submission. This issue is fixed in version 2.2.2. | ||||
| CVE-2025-61583 | 2 Joni1802, Teamspeak3 Manager Project | 2 Ts3 Manager, Ts3 Manager | 2025-10-20 | 4.3 Medium |
| TS3 Manager is modern web interface for maintaining Teamspeak3 servers. A reflected cross-site scripting vulnerability has been identified in versions 2.2.1 and earlier. The vulnerability exists in the error handling mechanism of the login page, where malicious scripts embedded in server hostnames are executed in the victim's browser context without proper sanitization. This issue is fixed in version 2.2.2. | ||||
| CVE-2025-8963 | 1 Jeecg | 1 Jimureport | 2025-10-17 | 6.3 Medium |
| A vulnerability was determined in jeecgboot JimuReport up to 2.1.1. Affected by this issue is some unknown functionality of the file /drag/onlDragDataSource/testConnection of the component Data Large Screen Template. The manipulation leads to deserialization. The attack may be launched remotely. The vendor response to the GitHub issue report is: "Modified, next version updated". | ||||