Filtered by vendor Redhat
Subscriptions
Filtered by product Rhel Tus
Subscriptions
Total
1151 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-35884 | 3 Debian, Linux, Redhat | 7 Debian Linux, Linux Kernel, Enterprise Linux and 4 more | 2025-12-23 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: udp: do not accept non-tunnel GSO skbs landing in a tunnel When rx-udp-gro-forwarding is enabled UDP packets might be GROed when being forwarded. If such packets might land in a tunnel this can cause various issues and udp_gro_receive makes sure this isn't the case by looking for a matching socket. This is performed in udp4/6_gro_lookup_skb but only in the current netns. This is an issue with tunneled packets when the endpoint is in another netns. In such cases the packets will be GROed at the UDP level, which leads to various issues later on. The same thing can happen with rx-gro-list. We saw this with geneve packets being GROed at the UDP level. In such case gso_size is set; later the packet goes through the geneve rx path, the geneve header is pulled, the offset are adjusted and frag_list skbs are not adjusted with regard to geneve. When those skbs hit skb_fragment, it will misbehave. Different outcomes are possible depending on what the GROed skbs look like; from corrupted packets to kernel crashes. One example is a BUG_ON[1] triggered in skb_segment while processing the frag_list. Because gso_size is wrong (geneve header was pulled) skb_segment thinks there is "geneve header size" of data in frag_list, although it's in fact the next packet. The BUG_ON itself has nothing to do with the issue. This is only one of the potential issues. Looking up for a matching socket in udp_gro_receive is fragile: the lookup could be extended to all netns (not speaking about performances) but nothing prevents those packets from being modified in between and we could still not find a matching socket. It's OK to keep the current logic there as it should cover most cases but we also need to make sure we handle tunnel packets being GROed too early. This is done by extending the checks in udp_unexpected_gso: GSO packets lacking the SKB_GSO_UDP_TUNNEL/_CSUM bits and landing in a tunnel must be segmented. [1] kernel BUG at net/core/skbuff.c:4408! RIP: 0010:skb_segment+0xd2a/0xf70 __udp_gso_segment+0xaa/0x560 | ||||
| CVE-2025-47287 | 3 Debian, Redhat, Tornadoweb | 7 Debian Linux, Enterprise Linux, Rhel E4s and 4 more | 2025-12-23 | 7.5 High |
| Tornado is a Python web framework and asynchronous networking library. When Tornado's ``multipart/form-data`` parser encounters certain errors, it logs a warning but continues trying to parse the remainder of the data. This allows remote attackers to generate an extremely high volume of logs, constituting a DoS attack. This DoS is compounded by the fact that the logging subsystem is synchronous. All versions of Tornado prior to 6.5.0 are affected. The vulnerable parser is enabled by default. Upgrade to Tornado version 6.50 to receive a patch. As a workaround, risk can be mitigated by blocking `Content-Type: multipart/form-data` in a proxy. | ||||
| CVE-2024-36020 | 3 Debian, Linux, Redhat | 7 Debian Linux, Linux Kernel, Enterprise Linux and 4 more | 2025-12-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i40e: fix vf may be used uninitialized in this function warning To fix the regression introduced by commit 52424f974bc5, which causes servers hang in very hard to reproduce conditions with resets races. Using two sources for the information is the root cause. In this function before the fix bumping v didn't mean bumping vf pointer. But the code used this variables interchangeably, so stale vf could point to different/not intended vf. Remove redundant "v" variable and iterate via single VF pointer across whole function instead to guarantee VF pointer validity. | ||||
| CVE-2024-26923 | 3 Debian, Linux, Redhat | 7 Debian Linux, Linux Kernel, Enterprise Linux and 4 more | 2025-12-23 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix garbage collector racing against connect() Garbage collector does not take into account the risk of embryo getting enqueued during the garbage collection. If such embryo has a peer that carries SCM_RIGHTS, two consecutive passes of scan_children() may see a different set of children. Leading to an incorrectly elevated inflight count, and then a dangling pointer within the gc_inflight_list. sockets are AF_UNIX/SOCK_STREAM S is an unconnected socket L is a listening in-flight socket bound to addr, not in fdtable V's fd will be passed via sendmsg(), gets inflight count bumped connect(S, addr) sendmsg(S, [V]); close(V) __unix_gc() ---------------- ------------------------- ----------- NS = unix_create1() skb1 = sock_wmalloc(NS) L = unix_find_other(addr) unix_state_lock(L) unix_peer(S) = NS // V count=1 inflight=0 NS = unix_peer(S) skb2 = sock_alloc() skb_queue_tail(NS, skb2[V]) // V became in-flight // V count=2 inflight=1 close(V) // V count=1 inflight=1 // GC candidate condition met for u in gc_inflight_list: if (total_refs == inflight_refs) add u to gc_candidates // gc_candidates={L, V} for u in gc_candidates: scan_children(u, dec_inflight) // embryo (skb1) was not // reachable from L yet, so V's // inflight remains unchanged __skb_queue_tail(L, skb1) unix_state_unlock(L) for u in gc_candidates: if (u.inflight) scan_children(u, inc_inflight_move_tail) // V count=1 inflight=2 (!) If there is a GC-candidate listening socket, lock/unlock its state. This makes GC wait until the end of any ongoing connect() to that socket. After flipping the lock, a possibly SCM-laden embryo is already enqueued. And if there is another embryo coming, it can not possibly carry SCM_RIGHTS. At this point, unix_inflight() can not happen because unix_gc_lock is already taken. Inflight graph remains unaffected. | ||||
| CVE-2024-35789 | 3 Debian, Linux, Redhat | 7 Debian Linux, Linux Kernel, Enterprise Linux and 4 more | 2025-12-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes When moving a station out of a VLAN and deleting the VLAN afterwards, the fast_rx entry still holds a pointer to the VLAN's netdev, which can cause use-after-free bugs. Fix this by immediately calling ieee80211_check_fast_rx after the VLAN change. | ||||
| CVE-2022-49122 | 2 Linux, Redhat | 5 Linux Kernel, Enterprise Linux, Rhel Aus and 2 more | 2025-12-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm ioctl: prevent potential spectre v1 gadget It appears like cmd could be a Spectre v1 gadget as it's supplied by a user and used as an array index. Prevent the contents of kernel memory from being leaked to userspace via speculative execution by using array_index_nospec. | ||||
| CVE-2022-49111 | 2 Linux, Redhat | 5 Linux Kernel, Enterprise Linux, Rhel Aus and 2 more | 2025-12-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix use after free in hci_send_acl This fixes the following trace caused by receiving HCI_EV_DISCONN_PHY_LINK_COMPLETE which does call hci_conn_del without first checking if conn->type is in fact AMP_LINK and in case it is do properly cleanup upper layers with hci_disconn_cfm: ================================================================== BUG: KASAN: use-after-free in hci_send_acl+0xaba/0xc50 Read of size 8 at addr ffff88800e404818 by task bluetoothd/142 CPU: 0 PID: 142 Comm: bluetoothd Not tainted 5.17.0-rc5-00006-gda4022eeac1a #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x45/0x59 print_address_description.constprop.0+0x1f/0x150 kasan_report.cold+0x7f/0x11b hci_send_acl+0xaba/0xc50 l2cap_do_send+0x23f/0x3d0 l2cap_chan_send+0xc06/0x2cc0 l2cap_sock_sendmsg+0x201/0x2b0 sock_sendmsg+0xdc/0x110 sock_write_iter+0x20f/0x370 do_iter_readv_writev+0x343/0x690 do_iter_write+0x132/0x640 vfs_writev+0x198/0x570 do_writev+0x202/0x280 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RSP: 002b:00007ffce8a099b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 14 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RDX: 0000000000000001 RSI: 00007ffce8a099e0 RDI: 0000000000000015 RAX: ffffffffffffffda RBX: 00007ffce8a099e0 RCX: 00007f788fc3cf77 R10: 00007ffce8af7080 R11: 0000000000000246 R12: 000055e4ccf75580 RBP: 0000000000000015 R08: 0000000000000002 R09: 0000000000000001 </TASK> R13: 000055e4ccf754a0 R14: 000055e4ccf75cd0 R15: 000055e4ccf4a6b0 Allocated by task 45: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 hci_chan_create+0x9a/0x2f0 l2cap_conn_add.part.0+0x1a/0xdc0 l2cap_connect_cfm+0x236/0x1000 le_conn_complete_evt+0x15a7/0x1db0 hci_le_conn_complete_evt+0x226/0x2c0 hci_le_meta_evt+0x247/0x450 hci_event_packet+0x61b/0xe90 hci_rx_work+0x4d5/0xc50 process_one_work+0x8fb/0x15a0 worker_thread+0x576/0x1240 kthread+0x29d/0x340 ret_from_fork+0x1f/0x30 Freed by task 45: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0xfb/0x130 kfree+0xac/0x350 hci_conn_cleanup+0x101/0x6a0 hci_conn_del+0x27e/0x6c0 hci_disconn_phylink_complete_evt+0xe0/0x120 hci_event_packet+0x812/0xe90 hci_rx_work+0x4d5/0xc50 process_one_work+0x8fb/0x15a0 worker_thread+0x576/0x1240 kthread+0x29d/0x340 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff88800c0f0500 The buggy address is located 24 bytes inside of which belongs to the cache kmalloc-128 of size 128 The buggy address belongs to the page: 128-byte region [ffff88800c0f0500, ffff88800c0f0580) flags: 0x100000000000200(slab|node=0|zone=1) page:00000000fe45cd86 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xc0f0 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 raw: 0100000000000200 ffffea00003a2c80 dead000000000004 ffff8880078418c0 page dumped because: kasan: bad access detected ffff88800c0f0400: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc Memory state around the buggy address: >ffff88800c0f0500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88800c0f0480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800c0f0580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ---truncated--- | ||||
| CVE-2022-48829 | 2 Linux, Redhat | 4 Linux Kernel, Rhel Aus, Rhel E4s and 1 more | 2025-12-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix NFSv3 SETATTR/CREATE's handling of large file sizes iattr::ia_size is a loff_t, so these NFSv3 procedures must be careful to deal with incoming client size values that are larger than s64_max without corrupting the value. Silently capping the value results in storing a different value than the client passed in which is unexpected behavior, so remove the min_t() check in decode_sattr3(). Note that RFC 1813 permits only the WRITE procedure to return NFS3ERR_FBIG. We believe that NFSv3 reference implementations also return NFS3ERR_FBIG when ia_size is too large. | ||||
| CVE-2022-48828 | 2 Linux, Redhat | 4 Linux Kernel, Rhel Aus, Rhel E4s and 1 more | 2025-12-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix ia_size underflow iattr::ia_size is a loff_t, which is a signed 64-bit type. NFSv3 and NFSv4 both define file size as an unsigned 64-bit type. Thus there is a range of valid file size values an NFS client can send that is already larger than Linux can handle. Currently decode_fattr4() dumps a full u64 value into ia_size. If that value happens to be larger than S64_MAX, then ia_size underflows. I'm about to fix up the NFSv3 behavior as well, so let's catch the underflow in the common code path: nfsd_setattr(). | ||||
| CVE-2022-48827 | 2 Linux, Redhat | 4 Linux Kernel, Rhel Aus, Rhel E4s and 1 more | 2025-12-23 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix the behavior of READ near OFFSET_MAX Dan Aloni reports: > Due to commit 8cfb9015280d ("NFS: Always provide aligned buffers to > the RPC read layers") on the client, a read of 0xfff is aligned up > to server rsize of 0x1000. > > As a result, in a test where the server has a file of size > 0x7fffffffffffffff, and the client tries to read from the offset > 0x7ffffffffffff000, the read causes loff_t overflow in the server > and it returns an NFS code of EINVAL to the client. The client as > a result indefinitely retries the request. The Linux NFS client does not handle NFS?ERR_INVAL, even though all NFS specifications permit servers to return that status code for a READ. Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed and return a short result. Set the EOF flag in the result to prevent the client from retrying the READ request. This behavior appears to be consistent with Solaris NFS servers. Note that NFSv3 and NFSv4 use u64 offset values on the wire. These must be converted to loff_t internally before use -- an implicit type cast is not adequate for this purpose. Otherwise VFS checks against sb->s_maxbytes do not work properly. | ||||
| CVE-2025-66287 | 1 Redhat | 7 Enterprise Linux, Rhel Aus, Rhel E4s and 4 more | 2025-12-22 | 8.8 High |
| A flaw was found in WebKitGTK. Processing malicious web content can cause an unexpected process crash due to improper memory handling. | ||||
| CVE-2025-13502 | 1 Redhat | 7 Enterprise Linux, Rhel Aus, Rhel E4s and 4 more | 2025-12-22 | 7.5 High |
| A flaw was found in WebKitGTK and WPE WebKit. This vulnerability allows an out-of-bounds read and integer underflow, leading to a UIProcess crash (DoS) via a crafted payload to the GLib remote inspector server. | ||||
| CVE-2024-12087 | 8 Almalinux, Archlinux, Gentoo and 5 more | 26 Almalinux, Arch Linux, Linux and 23 more | 2025-12-22 | 6.5 Medium |
| A path traversal vulnerability exists in rsync. It stems from behavior enabled by the `--inc-recursive` option, a default-enabled option for many client options and can be enabled by the server even if not explicitly enabled by the client. When using the `--inc-recursive` option, a lack of proper symlink verification coupled with deduplication checks occurring on a per-file-list basis could allow a server to write files outside of the client's intended destination directory. A malicious server could write malicious files to arbitrary locations named after valid directories/paths on the client. | ||||
| CVE-2024-26598 | 3 Debian, Linux, Redhat | 6 Debian Linux, Linux Kernel, Rhel Aus and 3 more | 2025-12-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache There is a potential UAF scenario in the case of an LPI translation cache hit racing with an operation that invalidates the cache, such as a DISCARD ITS command. The root of the problem is that vgic_its_check_cache() does not elevate the refcount on the vgic_irq before dropping the lock that serializes refcount changes. Have vgic_its_check_cache() raise the refcount on the returned vgic_irq and add the corresponding decrement after queueing the interrupt. | ||||
| CVE-2025-59089 | 1 Redhat | 8 Enterprise Linux, Enterprise Linux Eus, Rhel Aus and 5 more | 2025-12-19 | 5.9 Medium |
| If an attacker causes kdcproxy to connect to an attacker-controlled KDC server (e.g. through server-side request forgery), they can exploit the fact that kdcproxy does not enforce bounds on TCP response length to conduct a denial-of-service attack. While receiving the KDC's response, kdcproxy copies the entire buffered stream into a new buffer on each recv() call, even when the transfer is incomplete, causing excessive memory allocation and CPU usage. Additionally, kdcproxy accepts incoming response chunks as long as the received data length is not exactly equal to the length indicated in the response header, even when individual chunks or the total buffer exceed the maximum length of a Kerberos message. This allows an attacker to send unbounded data until the connection timeout is reached (approximately 12 seconds), exhausting server memory or CPU resources. Multiple concurrent requests can cause accept queue overflow, denying service to legitimate clients. | ||||
| CVE-2025-59088 | 1 Redhat | 8 Enterprise Linux, Enterprise Linux Eus, Rhel Aus and 5 more | 2025-12-19 | 8.6 High |
| If kdcproxy receives a request for a realm which does not have server addresses defined in its configuration, by default, it will query SRV records in the DNS zone matching the requested realm name. This creates a server-side request forgery vulnerability, since an attacker could send a request for a realm matching a DNS zone where they created SRV records pointing to arbitrary ports and hostnames (which may resolve to loopback or internal IP addresses). This vulnerability can be exploited to probe internal network topology and firewall rules, perform port scanning, and exfiltrate data. Deployments where the "use_dns" setting is explicitly set to false are not affected. | ||||
| CVE-2019-3863 | 5 Debian, Libssh2, Netapp and 2 more | 15 Debian Linux, Libssh2, Ontap Select Deploy Administration Utility and 12 more | 2025-12-19 | N/A |
| A flaw was found in libssh2 before 1.8.1 creating a vulnerability on the SSH client side. A server could send a multiple keyboard interactive response messages whose total length are greater than unsigned char max characters. This value is used by the SSH client as an index to copy memory causing in an out of bounds memory write error. | ||||
| CVE-2023-3600 | 2 Mozilla, Redhat | 8 Firefox, Firefox Esr, Thunderbird and 5 more | 2025-12-18 | 8.8 High |
| During the worker lifecycle, a use-after-free condition could have occurred, which could have led to a potentially exploitable crash. This vulnerability affects Firefox < 115.0.2, Firefox ESR < 115.0.2, and Thunderbird < 115.0.1. | ||||
| CVE-2023-25690 | 2 Apache, Redhat | 8 Http Server, Enterprise Linux, Jboss Core Services and 5 more | 2025-12-18 | 9.8 Critical |
| Some mod_proxy configurations on Apache HTTP Server versions 2.4.0 through 2.4.55 allow a HTTP Request Smuggling attack. Configurations are affected when mod_proxy is enabled along with some form of RewriteRule or ProxyPassMatch in which a non-specific pattern matches some portion of the user-supplied request-target (URL) data and is then re-inserted into the proxied request-target using variable substitution. For example, something like: RewriteEngine on RewriteRule "^/here/(.*)" "http://example.com:8080/elsewhere?$1"; [P] ProxyPassReverse /here/ http://example.com:8080/ Request splitting/smuggling could result in bypass of access controls in the proxy server, proxying unintended URLs to existing origin servers, and cache poisoning. Users are recommended to update to at least version 2.4.56 of Apache HTTP Server. | ||||
| CVE-2023-23605 | 2 Mozilla, Redhat | 8 Firefox, Firefox Esr, Thunderbird and 5 more | 2025-12-18 | 8.8 High |
| Mozilla developers and the Mozilla Fuzzing Team reported memory safety bugs present in Firefox 108 and Firefox ESR 102.6. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 109, Firefox ESR < 102.7, and Thunderbird < 102.7. | ||||