Filtered by vendor Linux
Subscriptions
Total
15922 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50394 | 1 Linux | 1 Linux Kernel | 2025-12-12 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: ismt: Fix an out-of-bounds bug in ismt_access() When the driver does not check the data from the user, the variable 'data->block[0]' may be very large to cause an out-of-bounds bug. The following log can reveal it: [ 33.995542] i2c i2c-1: ioctl, cmd=0x720, arg=0x7ffcb3dc3a20 [ 33.995978] ismt_smbus 0000:00:05.0: I2C_SMBUS_BLOCK_DATA: WRITE [ 33.996475] ================================================================== [ 33.996995] BUG: KASAN: out-of-bounds in ismt_access.cold+0x374/0x214b [ 33.997473] Read of size 18446744073709551615 at addr ffff88810efcfdb1 by task ismt_poc/485 [ 33.999450] Call Trace: [ 34.001849] memcpy+0x20/0x60 [ 34.002077] ismt_access.cold+0x374/0x214b [ 34.003382] __i2c_smbus_xfer+0x44f/0xfb0 [ 34.004007] i2c_smbus_xfer+0x10a/0x390 [ 34.004291] i2cdev_ioctl_smbus+0x2c8/0x710 [ 34.005196] i2cdev_ioctl+0x5ec/0x74c Fix this bug by checking the size of 'data->block[0]' first. | ||||
| CVE-2022-50398 | 1 Linux | 1 Linux Kernel | 2025-12-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: add atomic_check to bridge ops DRM commit_tails() will disable downstream crtc/encoder/bridge if both disable crtc is required and crtc->active is set before pushing a new frame downstream. There is a rare case that user space display manager issue an extra screen update immediately followed by close DRM device while down stream display interface is disabled. This extra screen update will timeout due to the downstream interface is disabled but will cause crtc->active be set. Hence the followed commit_tails() called by drm_release() will pass the disable downstream crtc/encoder/bridge conditions checking even downstream interface is disabled. This cause the crash to happen at dp_bridge_disable() due to it trying to access the main link register to push the idle pattern out while main link clocks is disabled. This patch adds atomic_check to prevent the extra frame will not be pushed down if display interface is down so that crtc->active will not be set neither. This will fail the conditions checking of disabling down stream crtc/encoder/bridge which prevent drm_release() from calling dp_bridge_disable() so that crash at dp_bridge_disable() prevented. There is no protection in the DRM framework to check if the display pipeline has been already disabled before trying again. The only check is the crtc_state->active but this is controlled by usermode using UAPI. Hence if the usermode sets this and then crashes, the driver needs to protect against double disable. SError Interrupt on CPU7, code 0x00000000be000411 -- SError CPU: 7 PID: 3878 Comm: Xorg Not tainted 5.19.0-stb-cbq #19 Hardware name: Google Lazor (rev3 - 8) (DT) pstate: a04000c9 (NzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __cmpxchg_case_acq_32+0x14/0x2c lr : do_raw_spin_lock+0xa4/0xdc sp : ffffffc01092b6a0 x29: ffffffc01092b6a0 x28: 0000000000000028 x27: 0000000000000038 x26: 0000000000000004 x25: ffffffd2973dce48 x24: 0000000000000000 x23: 00000000ffffffff x22: 00000000ffffffff x21: ffffffd2978d0008 x20: ffffffd2978d0008 x19: ffffff80ff759fc0 x18: 0000000000000000 x17: 004800a501260460 x16: 0441043b04600438 x15: 04380000089807d0 x14: 07b0089807800780 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000438 x10: 00000000000007d0 x9 : ffffffd2973e09e4 x8 : ffffff8092d53300 x7 : ffffff808902e8b8 x6 : 0000000000000001 x5 : ffffff808902e880 x4 : 0000000000000000 x3 : ffffff80ff759fc0 x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffffff80ff759fc0 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 7 PID: 3878 Comm: Xorg Not tainted 5.19.0-stb-cbq #19 Hardware name: Google Lazor (rev3 - 8) (DT) Call trace: dump_backtrace.part.0+0xbc/0xe4 show_stack+0x24/0x70 dump_stack_lvl+0x68/0x84 dump_stack+0x18/0x34 panic+0x14c/0x32c nmi_panic+0x58/0x7c arm64_serror_panic+0x78/0x84 do_serror+0x40/0x64 el1h_64_error_handler+0x30/0x48 el1h_64_error+0x68/0x6c __cmpxchg_case_acq_32+0x14/0x2c _raw_spin_lock_irqsave+0x38/0x4c lock_timer_base+0x40/0x78 __mod_timer+0xf4/0x25c schedule_timeout+0xd4/0xfc __wait_for_common+0xac/0x140 wait_for_completion_timeout+0x2c/0x54 dp_ctrl_push_idle+0x40/0x88 dp_bridge_disable+0x24/0x30 drm_atomic_bridge_chain_disable+0x90/0xbc drm_atomic_helper_commit_modeset_disables+0x198/0x444 msm_atomic_commit_tail+0x1d0/0x374 commit_tail+0x80/0x108 drm_atomic_helper_commit+0x118/0x11c drm_atomic_commit+0xb4/0xe0 drm_client_modeset_commit_atomic+0x184/0x224 drm_client_modeset_commit_locked+0x58/0x160 drm_client_modeset_commit+0x3c/0x64 __drm_fb_helper_restore_fbdev_mode_unlocked+0x98/0xac drm_fb_helper_set_par+0x74/0x80 drm_fb_helper_hotplug_event+0xdc/0xe0 __drm_fb_helper_restore_fbdev_mode_unlocked+0x7c/0xac drm_fb_helper_restore_fbdev_mode_unlocked+0x20/0x2c drm_fb_helper_lastclose+0x20/0x2c drm_lastclose+0x44/0x6c drm_release+0x88/0xd4 __fput+0x104/0x220 ____fput+0x1c/0x28 task_work_run+0x8c/0x100 d ---truncated--- | ||||
| CVE-2022-50399 | 1 Linux | 1 Linux Kernel | 2025-12-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: atomisp: prevent integer overflow in sh_css_set_black_frame() The "height" and "width" values come from the user so the "height * width" multiplication can overflow. | ||||
| CVE-2022-50400 | 1 Linux | 1 Linux Kernel | 2025-12-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: greybus: audio_helper: remove unused and wrong debugfs usage In the greybus audio_helper code, the debugfs file for the dapm has the potential to be removed and memory will be leaked. There is also the very real potential for this code to remove ALL debugfs entries from the system, and it seems like this is what will really happen if this code ever runs. This all is very wrong as the greybus audio driver did not create this debugfs file, the sound core did and controls the lifespan of it. So remove all of the debugfs logic from the audio_helper code as there's no way it could be correct. If this really is needed, it can come back with a fixup for the incorrect usage of the debugfs_lookup() call which is what caused this to be noticed at all. | ||||
| CVE-2023-53396 | 1 Linux | 1 Linux Kernel | 2025-12-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix memory leak in do_rename If renaming a file in an encrypted directory, function fscrypt_setup_filename allocates memory for a file name. This name is never used, and before returning to the caller the memory for it is not freed. When running kmemleak on it we see that it is registered as a leak. The report below is triggered by a simple program 'rename' that renames a file in an encrypted directory: unreferenced object 0xffff888101502840 (size 32): comm "rename", pid 9404, jiffies 4302582475 (age 435.735s) backtrace: __kmem_cache_alloc_node __kmalloc fscrypt_setup_filename do_rename ubifs_rename vfs_rename do_renameat2 To fix this we can remove the call to fscrypt_setup_filename as it's not needed. | ||||
| CVE-2023-53397 | 1 Linux | 1 Linux Kernel | 2025-12-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: modpost: fix off by one in is_executable_section() The > comparison should be >= to prevent an out of bounds array access. | ||||
| CVE-2023-53398 | 1 Linux | 1 Linux Kernel | 2025-12-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mlx5: fix possible ptp queue fifo use-after-free Fifo indexes are not checked during pop operations and it leads to potential use-after-free when poping from empty queue. Such case was possible during re-sync action. WARN_ON_ONCE covers future cases. There were out-of-order cqe spotted which lead to drain of the queue and use-after-free because of lack of fifo pointers check. Special check and counter are added to avoid resync operation if SKB could not exist in the fifo because of OOO cqe (skb_id must be between consumer and producer index). | ||||
| CVE-2023-53400 | 1 Linux | 1 Linux Kernel | 2025-12-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: Fix Oops by 9.1 surround channel names get_line_out_pfx() may trigger an Oops by overflowing the static array with more than 8 channels. This was reported for MacBookPro 12,1 with Cirrus codec. As a workaround, extend for the 9.1 channels and also fix the potential Oops by unifying the code paths accessing the same array with the proper size check. | ||||
| CVE-2023-53402 | 1 Linux | 1 Linux Kernel | 2025-12-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kernel/printk/index.c: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. | ||||
| CVE-2023-53403 | 1 Linux | 1 Linux Kernel | 2025-12-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: time/debug: Fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. | ||||
| CVE-2023-53404 | 1 Linux | 1 Linux Kernel | 2025-12-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: fotg210: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. | ||||
| CVE-2023-53405 | 1 Linux | 1 Linux Kernel | 2025-12-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: gadget: gr_udc: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. | ||||
| CVE-2023-53406 | 1 Linux | 1 Linux Kernel | 2025-12-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: gadget: pxa25x_udc: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. | ||||
| CVE-2025-39861 | 1 Linux | 1 Linux Kernel | 2025-12-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: vhci: Prevent use-after-free by removing debugfs files early Move the creation of debugfs files into a dedicated function, and ensure they are explicitly removed during vhci_release(), before associated data structures are freed. Previously, debugfs files such as "force_suspend", "force_wakeup", and others were created under hdev->debugfs but not removed in vhci_release(). Since vhci_release() frees the backing vhci_data structure, any access to these files after release would result in use-after-free errors. Although hdev->debugfs is later freed in hci_release_dev(), user can access files after vhci_data is freed but before hdev->debugfs is released. | ||||
| CVE-2025-39862 | 1 Linux | 1 Linux Kernel | 2025-12-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: fix list corruption after hardware restart Since stations are recreated from scratch, all lists that wcids are added to must be cleared before calling ieee80211_restart_hw. Set wcid->sta = 0 for each wcid entry in order to ensure that they are not added again before they are ready. | ||||
| CVE-2025-39863 | 1 Linux | 1 Linux Kernel | 2025-12-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix use-after-free when rescheduling brcmf_btcoex_info work The brcmf_btcoex_detach() only shuts down the btcoex timer, if the flag timer_on is false. However, the brcmf_btcoex_timerfunc(), which runs as timer handler, sets timer_on to false. This creates critical race conditions: 1.If brcmf_btcoex_detach() is called while brcmf_btcoex_timerfunc() is executing, it may observe timer_on as false and skip the call to timer_shutdown_sync(). 2.The brcmf_btcoex_timerfunc() may then reschedule the brcmf_btcoex_info worker after the cancel_work_sync() has been executed, resulting in use-after-free bugs. The use-after-free bugs occur in two distinct scenarios, depending on the timing of when the brcmf_btcoex_info struct is freed relative to the execution of its worker thread. Scenario 1: Freed before the worker is scheduled The brcmf_btcoex_info is deallocated before the worker is scheduled. A race condition can occur when schedule_work(&bt_local->work) is called after the target memory has been freed. The sequence of events is detailed below: CPU0 | CPU1 brcmf_btcoex_detach | brcmf_btcoex_timerfunc | bt_local->timer_on = false; if (cfg->btcoex->timer_on) | ... | cancel_work_sync(); | ... | kfree(cfg->btcoex); // FREE | | schedule_work(&bt_local->work); // USE Scenario 2: Freed after the worker is scheduled The brcmf_btcoex_info is freed after the worker has been scheduled but before or during its execution. In this case, statements within the brcmf_btcoex_handler() — such as the container_of macro and subsequent dereferences of the brcmf_btcoex_info object will cause a use-after-free access. The following timeline illustrates this scenario: CPU0 | CPU1 brcmf_btcoex_detach | brcmf_btcoex_timerfunc | bt_local->timer_on = false; if (cfg->btcoex->timer_on) | ... | cancel_work_sync(); | ... | schedule_work(); // Reschedule | kfree(cfg->btcoex); // FREE | brcmf_btcoex_handler() // Worker /* | btci = container_of(....); // USE The kfree() above could | ... also occur at any point | btci-> // USE during the worker's execution| */ | To resolve the race conditions, drop the conditional check and call timer_shutdown_sync() directly. It can deactivate the timer reliably, regardless of its current state. Once stopped, the timer_on state is then set to false. | ||||
| CVE-2025-39879 | 1 Linux | 1 Linux Kernel | 2025-12-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ceph: always call ceph_shift_unused_folios_left() The function ceph_process_folio_batch() sets folio_batch entries to NULL, which is an illegal state. Before folio_batch_release() crashes due to this API violation, the function ceph_shift_unused_folios_left() is supposed to remove those NULLs from the array. However, since commit ce80b76dd327 ("ceph: introduce ceph_process_folio_batch() method"), this shifting doesn't happen anymore because the "for" loop got moved to ceph_process_folio_batch(), and now the `i` variable that remains in ceph_writepages_start() doesn't get incremented anymore, making the shifting effectively unreachable much of the time. Later, commit 1551ec61dc55 ("ceph: introduce ceph_submit_write() method") added more preconditions for doing the shift, replacing the `i` check (with something that is still just as broken): - if ceph_process_folio_batch() fails, shifting never happens - if ceph_move_dirty_page_in_page_array() was never called (because ceph_process_folio_batch() has returned early for some of various reasons), shifting never happens - if `processed_in_fbatch` is zero (because ceph_process_folio_batch() has returned early for some of the reasons mentioned above or because ceph_move_dirty_page_in_page_array() has failed), shifting never happens Since those two commits, any problem in ceph_process_folio_batch() could crash the kernel, e.g. this way: BUG: kernel NULL pointer dereference, address: 0000000000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: Oops: 0002 [#1] SMP NOPTI CPU: 172 UID: 0 PID: 2342707 Comm: kworker/u778:8 Not tainted 6.15.10-cm4all1-es #714 NONE Hardware name: Dell Inc. PowerEdge R7615/0G9DHV, BIOS 1.6.10 12/08/2023 Workqueue: writeback wb_workfn (flush-ceph-1) RIP: 0010:folios_put_refs+0x85/0x140 Code: 83 c5 01 39 e8 7e 76 48 63 c5 49 8b 5c c4 08 b8 01 00 00 00 4d 85 ed 74 05 41 8b 44 ad 00 48 8b 15 b0 > RSP: 0018:ffffb880af8db778 EFLAGS: 00010207 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000003 RDX: ffffe377cc3b0000 RSI: 0000000000000000 RDI: ffffb880af8db8c0 RBP: 0000000000000000 R08: 000000000000007d R09: 000000000102b86f R10: 0000000000000001 R11: 00000000000000ac R12: ffffb880af8db8c0 R13: 0000000000000000 R14: 0000000000000000 R15: ffff9bd262c97000 FS: 0000000000000000(0000) GS:ffff9c8efc303000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000034 CR3: 0000000160958004 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> ceph_writepages_start+0xeb9/0x1410 The crash can be reproduced easily by changing the ceph_check_page_before_write() return value to `-E2BIG`. (Interestingly, the crash happens only if `huge_zero_folio` has already been allocated; without `huge_zero_folio`, is_huge_zero_folio(NULL) returns true and folios_put_refs() skips NULL entries instead of dereferencing them. That makes reproducing the bug somewhat unreliable. See https://lore.kernel.org/20250826231626.218675-1-max.kellermann@ionos.com for a discussion of this detail.) My suggestion is to move the ceph_shift_unused_folios_left() to right after ceph_process_folio_batch() to ensure it always gets called to fix up the illegal folio_batch state. | ||||
| CVE-2025-39882 | 1 Linux | 1 Linux Kernel | 2025-12-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: fix potential OF node use-after-free The for_each_child_of_node() helper drops the reference it takes to each node as it iterates over children and an explicit of_node_put() is only needed when exiting the loop early. Drop the recently introduced bogus additional reference count decrement at each iteration that could potentially lead to a use-after-free. | ||||
| CVE-2025-39886 | 1 Linux | 1 Linux Kernel | 2025-12-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init() Currently, calling bpf_map_kmalloc_node() from __bpf_async_init() can cause various locking issues; see the following stack trace (edited for style) as one example: ... [10.011566] do_raw_spin_lock.cold [10.011570] try_to_wake_up (5) double-acquiring the same [10.011575] kick_pool rq_lock, causing a hardlockup [10.011579] __queue_work [10.011582] queue_work_on [10.011585] kernfs_notify [10.011589] cgroup_file_notify [10.011593] try_charge_memcg (4) memcg accounting raises an [10.011597] obj_cgroup_charge_pages MEMCG_MAX event [10.011599] obj_cgroup_charge_account [10.011600] __memcg_slab_post_alloc_hook [10.011603] __kmalloc_node_noprof ... [10.011611] bpf_map_kmalloc_node [10.011612] __bpf_async_init [10.011615] bpf_timer_init (3) BPF calls bpf_timer_init() [10.011617] bpf_prog_xxxxxxxxxxxxxxxx_fcg_runnable [10.011619] bpf__sched_ext_ops_runnable [10.011620] enqueue_task_scx (2) BPF runs with rq_lock held [10.011622] enqueue_task [10.011626] ttwu_do_activate [10.011629] sched_ttwu_pending (1) grabs rq_lock ... The above was reproduced on bpf-next (b338cf849ec8) by modifying ./tools/sched_ext/scx_flatcg.bpf.c to call bpf_timer_init() during ops.runnable(), and hacking the memcg accounting code a bit to make a bpf_timer_init() call more likely to raise an MEMCG_MAX event. We have also run into other similar variants (both internally and on bpf-next), including double-acquiring cgroup_file_kn_lock, the same worker_pool::lock, etc. As suggested by Shakeel, fix this by using __GFP_HIGH instead of GFP_ATOMIC in __bpf_async_init(), so that e.g. if try_charge_memcg() raises an MEMCG_MAX event, we call __memcg_memory_event() with @allow_spinning=false and avoid calling cgroup_file_notify() there. Depends on mm patch "memcg: skip cgroup_file_notify if spinning is not allowed": https://lore.kernel.org/bpf/20250905201606.66198-1-shakeel.butt@linux.dev/ v0 approach s/bpf_map_kmalloc_node/bpf_mem_alloc/ https://lore.kernel.org/bpf/20250905061919.439648-1-yepeilin@google.com/ v1 approach: https://lore.kernel.org/bpf/20250905234547.862249-1-yepeilin@google.com/ | ||||
| CVE-2025-39888 | 1 Linux | 1 Linux Kernel | 2025-12-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse: Block access to folio overlimit syz reported a slab-out-of-bounds Write in fuse_dev_do_write. When the number of bytes to be retrieved is truncated to the upper limit by fc->max_pages and there is an offset, the oob is triggered. Add a loop termination condition to prevent overruns. | ||||