Total
7312 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-26174 | 1 Microsoft | 30 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 27 more | 2026-04-23 | 7 High |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Server Update Service allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-26167 | 1 Microsoft | 24 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 21 more | 2026-04-23 | 8.8 High |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Push Notifications allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-26165 | 1 Microsoft | 14 Windows 11 22h3, Windows 11 23h2, Windows 11 23h2 and 11 more | 2026-04-23 | 7 High |
| Use after free in Windows Shell allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-23340 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: sched: avoid qdisc_reset_all_tx_gt() vs dequeue race for lockless qdiscs When shrinking the number of real tx queues, netif_set_real_num_tx_queues() calls qdisc_reset_all_tx_gt() to flush qdiscs for queues which will no longer be used. qdisc_reset_all_tx_gt() currently serializes qdisc_reset() with qdisc_lock(). However, for lockless qdiscs, the dequeue path is serialized by qdisc_run_begin/end() using qdisc->seqlock instead, so qdisc_reset() can run concurrently with __qdisc_run() and free skbs while they are still being dequeued, leading to UAF. This can easily be reproduced on e.g. virtio-net by imposing heavy traffic while frequently changing the number of queue pairs: iperf3 -ub0 -c $peer -t 0 & while :; do ethtool -L eth0 combined 1 ethtool -L eth0 combined 2 done With KASAN enabled, this leads to reports like: BUG: KASAN: slab-use-after-free in __qdisc_run+0x133f/0x1760 ... Call Trace: <TASK> ... __qdisc_run+0x133f/0x1760 __dev_queue_xmit+0x248f/0x3550 ip_finish_output2+0xa42/0x2110 ip_output+0x1a7/0x410 ip_send_skb+0x2e6/0x480 udp_send_skb+0xb0a/0x1590 udp_sendmsg+0x13c9/0x1fc0 ... </TASK> Allocated by task 1270 on cpu 5 at 44.558414s: ... alloc_skb_with_frags+0x84/0x7c0 sock_alloc_send_pskb+0x69a/0x830 __ip_append_data+0x1b86/0x48c0 ip_make_skb+0x1e8/0x2b0 udp_sendmsg+0x13a6/0x1fc0 ... Freed by task 1306 on cpu 3 at 44.558445s: ... kmem_cache_free+0x117/0x5e0 pfifo_fast_reset+0x14d/0x580 qdisc_reset+0x9e/0x5f0 netif_set_real_num_tx_queues+0x303/0x840 virtnet_set_channels+0x1bf/0x260 [virtio_net] ethnl_set_channels+0x684/0xae0 ethnl_default_set_doit+0x31a/0x890 ... Serialize qdisc_reset_all_tx_gt() against the lockless dequeue path by taking qdisc->seqlock for TCQ_F_NOLOCK qdiscs, matching the serialization model already used by dev_reset_queue(). Additionally clear QDISC_STATE_NON_EMPTY after reset so the qdisc state reflects an empty queue, avoiding needless re-scheduling. | ||||
| CVE-2026-23336 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: cancel rfkill_block work in wiphy_unregister() There is a use-after-free error in cfg80211_shutdown_all_interfaces found by syzkaller: BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220 Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326 CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: events cfg80211_rfkill_block_work Call Trace: <TASK> dump_stack_lvl+0x116/0x1f0 print_report+0xcd/0x630 kasan_report+0xe0/0x110 cfg80211_shutdown_all_interfaces+0x213/0x220 cfg80211_rfkill_block_work+0x1e/0x30 process_one_work+0x9cf/0x1b70 worker_thread+0x6c8/0xf10 kthread+0x3c5/0x780 ret_from_fork+0x56d/0x700 ret_from_fork_asm+0x1a/0x30 </TASK> The problem arises due to the rfkill_block work is not cancelled when wiphy is being unregistered. In order to fix the issue cancel the corresponding work in wiphy_unregister(). Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2026-23319 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a UAF issue in bpf_trampoline_link_cgroup_shim The root cause of this bug is that when 'bpf_link_put' reduces the refcount of 'shim_link->link.link' to zero, the resource is considered released but may still be referenced via 'tr->progs_hlist' in 'cgroup_shim_find'. The actual cleanup of 'tr->progs_hlist' in 'bpf_shim_tramp_link_release' is deferred. During this window, another process can cause a use-after-free via 'bpf_trampoline_link_cgroup_shim'. Based on Martin KaFai Lau's suggestions, I have created a simple patch. To fix this: Add an atomic non-zero check in 'bpf_trampoline_link_cgroup_shim'. Only increment the refcount if it is not already zero. Testing: I verified the fix by adding a delay in 'bpf_shim_tramp_link_release' to make the bug easier to trigger: static void bpf_shim_tramp_link_release(struct bpf_link *link) { /* ... */ if (!shim_link->trampoline) return; + msleep(100); WARN_ON_ONCE(bpf_trampoline_unlink_prog(&shim_link->link, shim_link->trampoline, NULL)); bpf_trampoline_put(shim_link->trampoline); } Before the patch, running a PoC easily reproduced the crash(almost 100%) with a call trace similar to KaiyanM's report. After the patch, the bug no longer occurs even after millions of iterations. | ||||
| CVE-2026-23322 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: Fix use-after-free and list corruption on sender error The analysis from Breno: When the SMI sender returns an error, smi_work() delivers an error response but then jumps back to restart without cleaning up properly: 1. intf->curr_msg is not cleared, so no new message is pulled 2. newmsg still points to the message, causing sender() to be called again with the same message 3. If sender() fails again, deliver_err_response() is called with the same recv_msg that was already queued for delivery This causes list_add corruption ("list_add double add") because the recv_msg is added to the user_msgs list twice. Subsequently, the corrupted list leads to use-after-free when the memory is freed and reused, and eventually a NULL pointer dereference when accessing recv_msg->done. The buggy sequence: sender() fails -> deliver_err_response(recv_msg) // recv_msg queued for delivery -> goto restart // curr_msg not cleared! sender() fails again (same message!) -> deliver_err_response(recv_msg) // tries to queue same recv_msg -> LIST CORRUPTION Fix this by freeing the message and setting it to NULL on a send error. Also, always free the newmsg on a send error, otherwise it will leak. | ||||
| CVE-2026-23427 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in durable v2 replay of active file handles parse_durable_handle_context() unconditionally assigns dh_info->fp->conn to the current connection when handling a DURABLE_REQ_V2 context with SMB2_FLAGS_REPLAY_OPERATION. ksmbd_lookup_fd_cguid() does not filter by fp->conn, so it returns file handles that are already actively connected. The unconditional overwrite replaces fp->conn, and when the overwriting connection is subsequently freed, __ksmbd_close_fd() dereferences the stale fp->conn via spin_lock(&fp->conn->llist_lock), causing a use-after-free. KASAN report: [ 7.349357] ================================================================== [ 7.349607] BUG: KASAN: slab-use-after-free in _raw_spin_lock+0x75/0xe0 [ 7.349811] Write of size 4 at addr ffff8881056ac18c by task kworker/1:2/108 [ 7.350010] [ 7.350064] CPU: 1 UID: 0 PID: 108 Comm: kworker/1:2 Not tainted 7.0.0-rc3+ #58 PREEMPTLAZY [ 7.350068] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 7.350070] Workqueue: ksmbd-io handle_ksmbd_work [ 7.350083] Call Trace: [ 7.350087] <TASK> [ 7.350087] dump_stack_lvl+0x64/0x80 [ 7.350094] print_report+0xce/0x660 [ 7.350100] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 7.350101] ? __pfx___mod_timer+0x10/0x10 [ 7.350106] ? _raw_spin_lock+0x75/0xe0 [ 7.350108] kasan_report+0xce/0x100 [ 7.350109] ? _raw_spin_lock+0x75/0xe0 [ 7.350114] kasan_check_range+0x105/0x1b0 [ 7.350116] _raw_spin_lock+0x75/0xe0 [ 7.350118] ? __pfx__raw_spin_lock+0x10/0x10 [ 7.350119] ? __call_rcu_common.constprop.0+0x25e/0x780 [ 7.350125] ? close_id_del_oplock+0x2cc/0x4e0 [ 7.350128] __ksmbd_close_fd+0x27f/0xaf0 [ 7.350131] ksmbd_close_fd+0x135/0x1b0 [ 7.350133] smb2_close+0xb19/0x15b0 [ 7.350142] ? __pfx_smb2_close+0x10/0x10 [ 7.350143] ? xas_load+0x18/0x270 [ 7.350146] ? _raw_spin_lock+0x84/0xe0 [ 7.350148] ? __pfx__raw_spin_lock+0x10/0x10 [ 7.350150] ? _raw_spin_unlock+0xe/0x30 [ 7.350151] ? ksmbd_smb2_check_message+0xeb2/0x24c0 [ 7.350153] ? ksmbd_tree_conn_lookup+0xcd/0xf0 [ 7.350154] handle_ksmbd_work+0x40f/0x1080 [ 7.350156] process_one_work+0x5fa/0xef0 [ 7.350162] ? assign_work+0x122/0x3e0 [ 7.350163] worker_thread+0x54b/0xf70 [ 7.350165] ? __pfx_worker_thread+0x10/0x10 [ 7.350166] kthread+0x346/0x470 [ 7.350170] ? recalc_sigpending+0x19b/0x230 [ 7.350176] ? __pfx_kthread+0x10/0x10 [ 7.350178] ret_from_fork+0x4fb/0x6c0 [ 7.350183] ? __pfx_ret_from_fork+0x10/0x10 [ 7.350185] ? __switch_to+0x36c/0xbe0 [ 7.350188] ? __pfx_kthread+0x10/0x10 [ 7.350190] ret_from_fork_asm+0x1a/0x30 [ 7.350197] </TASK> [ 7.350197] [ 7.355160] Allocated by task 123: [ 7.355261] kasan_save_stack+0x33/0x60 [ 7.355373] kasan_save_track+0x14/0x30 [ 7.355484] __kasan_kmalloc+0x8f/0xa0 [ 7.355593] ksmbd_conn_alloc+0x44/0x6d0 [ 7.355711] ksmbd_kthread_fn+0x243/0xd70 [ 7.355839] kthread+0x346/0x470 [ 7.355942] ret_from_fork+0x4fb/0x6c0 [ 7.356051] ret_from_fork_asm+0x1a/0x30 [ 7.356164] [ 7.356214] Freed by task 134: [ 7.356305] kasan_save_stack+0x33/0x60 [ 7.356416] kasan_save_track+0x14/0x30 [ 7.356527] kasan_save_free_info+0x3b/0x60 [ 7.356646] __kasan_slab_free+0x43/0x70 [ 7.356761] kfree+0x1ca/0x430 [ 7.356862] ksmbd_tcp_disconnect+0x59/0xe0 [ 7.356993] ksmbd_conn_handler_loop+0x77e/0xd40 [ 7.357138] kthread+0x346/0x470 [ 7.357240] ret_from_fork+0x4fb/0x6c0 [ 7.357350] ret_from_fork_asm+0x1a/0x30 [ 7.357463] [ 7.357513] The buggy address belongs to the object at ffff8881056ac000 [ 7.357513] which belongs to the cache kmalloc-1k of size 1024 [ 7.357857] The buggy address is located 396 bytes inside of [ 7.357857] freed 1024-byte region ---truncated--- | ||||
| CVE-2026-23428 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of share_conf in compound request smb2_get_ksmbd_tcon() reuses work->tcon in compound requests without validating tcon->t_state. ksmbd_tree_conn_lookup() checks t_state == TREE_CONNECTED on the initial lookup path, but the compound reuse path bypasses this check entirely. If a prior command in the compound (SMB2_TREE_DISCONNECT) sets t_state to TREE_DISCONNECTED and frees share_conf via ksmbd_share_config_put(), subsequent commands dereference the freed share_conf through work->tcon->share_conf. KASAN report: [ 4.144653] ================================================================== [ 4.145059] BUG: KASAN: slab-use-after-free in smb2_write+0xc74/0xe70 [ 4.145415] Read of size 4 at addr ffff88810430c194 by task kworker/1:1/44 [ 4.145772] [ 4.145867] CPU: 1 UID: 0 PID: 44 Comm: kworker/1:1 Not tainted 7.0.0-rc3+ #60 PREEMPTLAZY [ 4.145871] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 4.145875] Workqueue: ksmbd-io handle_ksmbd_work [ 4.145888] Call Trace: [ 4.145892] <TASK> [ 4.145894] dump_stack_lvl+0x64/0x80 [ 4.145910] print_report+0xce/0x660 [ 4.145919] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 4.145928] ? smb2_write+0xc74/0xe70 [ 4.145931] kasan_report+0xce/0x100 [ 4.145934] ? smb2_write+0xc74/0xe70 [ 4.145937] smb2_write+0xc74/0xe70 [ 4.145939] ? __pfx_smb2_write+0x10/0x10 [ 4.145942] ? _raw_spin_unlock+0xe/0x30 [ 4.145945] ? ksmbd_smb2_check_message+0xeb2/0x24c0 [ 4.145948] ? smb2_tree_disconnect+0x31c/0x480 [ 4.145951] handle_ksmbd_work+0x40f/0x1080 [ 4.145953] process_one_work+0x5fa/0xef0 [ 4.145962] ? assign_work+0x122/0x3e0 [ 4.145964] worker_thread+0x54b/0xf70 [ 4.145967] ? __pfx_worker_thread+0x10/0x10 [ 4.145970] kthread+0x346/0x470 [ 4.145976] ? recalc_sigpending+0x19b/0x230 [ 4.145980] ? __pfx_kthread+0x10/0x10 [ 4.145984] ret_from_fork+0x4fb/0x6c0 [ 4.145992] ? __pfx_ret_from_fork+0x10/0x10 [ 4.145995] ? __switch_to+0x36c/0xbe0 [ 4.145999] ? __pfx_kthread+0x10/0x10 [ 4.146003] ret_from_fork_asm+0x1a/0x30 [ 4.146013] </TASK> [ 4.146014] [ 4.149858] Allocated by task 44: [ 4.149953] kasan_save_stack+0x33/0x60 [ 4.150061] kasan_save_track+0x14/0x30 [ 4.150169] __kasan_kmalloc+0x8f/0xa0 [ 4.150274] ksmbd_share_config_get+0x1dd/0xdd0 [ 4.150401] ksmbd_tree_conn_connect+0x7e/0x600 [ 4.150529] smb2_tree_connect+0x2e6/0x1000 [ 4.150645] handle_ksmbd_work+0x40f/0x1080 [ 4.150761] process_one_work+0x5fa/0xef0 [ 4.150873] worker_thread+0x54b/0xf70 [ 4.150978] kthread+0x346/0x470 [ 4.151071] ret_from_fork+0x4fb/0x6c0 [ 4.151176] ret_from_fork_asm+0x1a/0x30 [ 4.151286] [ 4.151332] Freed by task 44: [ 4.151418] kasan_save_stack+0x33/0x60 [ 4.151526] kasan_save_track+0x14/0x30 [ 4.151634] kasan_save_free_info+0x3b/0x60 [ 4.151751] __kasan_slab_free+0x43/0x70 [ 4.151861] kfree+0x1ca/0x430 [ 4.151952] __ksmbd_tree_conn_disconnect+0xc8/0x190 [ 4.152088] smb2_tree_disconnect+0x1cd/0x480 [ 4.152211] handle_ksmbd_work+0x40f/0x1080 [ 4.152326] process_one_work+0x5fa/0xef0 [ 4.152438] worker_thread+0x54b/0xf70 [ 4.152545] kthread+0x346/0x470 [ 4.152638] ret_from_fork+0x4fb/0x6c0 [ 4.152743] ret_from_fork_asm+0x1a/0x30 [ 4.152853] [ 4.152900] The buggy address belongs to the object at ffff88810430c180 [ 4.152900] which belongs to the cache kmalloc-96 of size 96 [ 4.153226] The buggy address is located 20 bytes inside of [ 4.153226] freed 96-byte region [ffff88810430c180, ffff88810430c1e0) [ 4.153549] [ 4.153596] The buggy address belongs to the physical page: [ 4.153750] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff88810430ce80 pfn:0x10430c [ 4.154000] flags: 0x ---truncated--- | ||||
| CVE-2026-23432 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mshv: Fix use-after-free in mshv_map_user_memory error path In the error path of mshv_map_user_memory(), calling vfree() directly on the region leaves the MMU notifier registered. When userspace later unmaps the memory, the notifier fires and accesses the freed region, causing a use-after-free and potential kernel panic. Replace vfree() with mshv_partition_put() to properly unregister the MMU notifier before freeing the region. | ||||
| CVE-2026-23443 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: Fix previous acpi_processor_errata_piix4() fix After commi f132e089fe89 ("ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4()"), device pointers may be dereferenced after dropping references to the device objects pointed to by them, which may cause a use-after-free to occur. Moreover, debug messages about enabling the errata may be printed if the errata flags corresponding to them are unset. Address all of these issues by moving message printing to the points in the code where the errata flags are set. | ||||
| CVE-2026-6919 | 2026-04-23 | N/A | ||
| Use after free in DevTools in Google Chrome prior to 147.0.7727.117 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-31435 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix read abandonment during retry Under certain circumstances, all the remaining subrequests from a read request will get abandoned during retry. The abandonment process expects the 'subreq' variable to be set to the place to start abandonment from, but it doesn't always have a useful value (it will be uninitialised on the first pass through the loop and it may point to a deleted subrequest on later passes). Fix the first jump to "abandon:" to set subreq to the start of the first subrequest expected to need retry (which, in this abandonment case, turned out unexpectedly to no longer have NEED_RETRY set). Also clear the subreq pointer after discarding superfluous retryable subrequests to cause an oops if we do try to access it. | ||||
| CVE-2026-31442 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix possible invalid memory access after FLR In the case that the first Function Level Reset (FLR) concludes correctly, but in the second FLR the scratch area for the saved configuration cannot be allocated, it's possible for a invalid memory access to happen. Always set the deallocated scratch area to NULL after FLR completes. | ||||
| CVE-2026-31446 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix use-after-free in update_super_work when racing with umount Commit b98535d09179 ("ext4: fix bug_on in start_this_handle during umount filesystem") moved ext4_unregister_sysfs() before flushing s_sb_upd_work to prevent new error work from being queued via /proc/fs/ext4/xx/mb_groups reads during unmount. However, this introduced a use-after-free because update_super_work calls ext4_notify_error_sysfs() -> sysfs_notify() which accesses the kobject's kernfs_node after it has been freed by kobject_del() in ext4_unregister_sysfs(): update_super_work ext4_put_super ----------------- -------------- ext4_unregister_sysfs(sb) kobject_del(&sbi->s_kobj) __kobject_del() sysfs_remove_dir() kobj->sd = NULL sysfs_put(sd) kernfs_put() // RCU free ext4_notify_error_sysfs(sbi) sysfs_notify(&sbi->s_kobj) kn = kobj->sd // stale pointer kernfs_get(kn) // UAF on freed kernfs_node ext4_journal_destroy() flush_work(&sbi->s_sb_upd_work) Instead of reordering the teardown sequence, fix this by making ext4_notify_error_sysfs() detect that sysfs has already been torn down by checking s_kobj.state_in_sysfs, and skipping the sysfs_notify() call in that case. A dedicated mutex (s_error_notify_mutex) serializes ext4_notify_error_sysfs() against kobject_del() in ext4_unregister_sysfs() to prevent TOCTOU races where the kobject could be deleted between the state_in_sysfs check and the sysfs_notify() call. | ||||
| CVE-2026-31468 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Fix double free in dma-buf feature The error path through vfio_pci_core_feature_dma_buf() ignores its own advice to only use dma_buf_put() after dma_buf_export(), instead falling through the entire unwind chain. In the unlikely event that we encounter file descriptor exhaustion, this can result in an unbalanced refcount on the vfio device and double free of allocated objects. Avoid this by moving the "put" directly into the error path and return the errno rather than entering the unwind chain. | ||||
| CVE-2026-31474 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: isotp: fix tx.buf use-after-free in isotp_sendmsg() isotp_sendmsg() uses only cmpxchg() on so->tx.state to serialize access to so->tx.buf. isotp_release() waits for ISOTP_IDLE via wait_event_interruptible() and then calls kfree(so->tx.buf). If a signal interrupts the wait_event_interruptible() inside close() while tx.state is ISOTP_SENDING, the loop exits early and release proceeds to force ISOTP_SHUTDOWN and continues to kfree(so->tx.buf) while sendmsg may still be reading so->tx.buf for the final CAN frame in isotp_fill_dataframe(). The so->tx.buf can be allocated once when the standard tx.buf length needs to be extended. Move the kfree() of this potentially extended tx.buf to sk_destruct time when either isotp_sendmsg() and isotp_release() are done. | ||||
| CVE-2026-31475 | 1 Linux | 1 Linux Kernel | 2026-04-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: sma1307: fix double free of devm_kzalloc() memory A previous change added NULL checks and cleanup for allocation failures in sma1307_setting_loaded(). However, the cleanup for mode_set entries is wrong. Those entries are allocated with devm_kzalloc(), so they are device-managed resources and must not be freed with kfree(). Manually freeing them in the error path can lead to a double free when devres later releases the same memory. Drop the manual kfree() loop and let devres handle the cleanup. | ||||
| CVE-2026-31485 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-lpspi: fix teardown order issue (UAF) There is a teardown order issue in the driver. The SPI controller is registered using devm_spi_register_controller(), which delays unregistration of the SPI controller until after the fsl_lpspi_remove() function returns. As the fsl_lpspi_remove() function synchronously tears down the DMA channels, a running SPI transfer triggers the following NULL pointer dereference due to use after free: | fsl_lpspi 42550000.spi: I/O Error in DMA RX | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] | Call trace: | fsl_lpspi_dma_transfer+0x260/0x340 [spi_fsl_lpspi] | fsl_lpspi_transfer_one+0x198/0x448 [spi_fsl_lpspi] | spi_transfer_one_message+0x49c/0x7c8 | __spi_pump_transfer_message+0x120/0x420 | __spi_sync+0x2c4/0x520 | spi_sync+0x34/0x60 | spidev_message+0x20c/0x378 [spidev] | spidev_ioctl+0x398/0x750 [spidev] [...] Switch from devm_spi_register_controller() to spi_register_controller() in fsl_lpspi_probe() and add the corresponding spi_unregister_controller() in fsl_lpspi_remove(). | ||||
| CVE-2026-31516 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: prevent policy_hthresh.work from racing with netns teardown A XFRM_MSG_NEWSPDINFO request can queue the per-net work item policy_hthresh.work onto the system workqueue. The queued callback, xfrm_hash_rebuild(), retrieves the enclosing struct net via container_of(). If the net namespace is torn down before that work runs, the associated struct net may already have been freed, and xfrm_hash_rebuild() may then dereference stale memory. xfrm_policy_fini() already flushes policy_hash_work during teardown, but it does not synchronize policy_hthresh.work. Synchronize policy_hthresh.work in xfrm_policy_fini() as well, so the queued work cannot outlive the net namespace teardown and access a freed struct net. | ||||