Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
16215 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-37907 | 1 Linux | 1 Linux Kernel | 2025-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Fix locking order in ivpu_job_submit Fix deadlock in job submission and abort handling. When a thread aborts currently executing jobs due to a fault, it first locks the global lock protecting submitted_jobs (#1). After the last job is destroyed, it proceeds to release the related context and locks file_priv (#2). Meanwhile, in the job submission thread, the file_priv lock (#2) is taken first, and then the submitted_jobs lock (#1) is obtained when a job is added to the submitted jobs list. CPU0 CPU1 ---- ---- (for example due to a fault) (jobs submissions keep coming) lock(&vdev->submitted_jobs_lock) #1 ivpu_jobs_abort_all() job_destroy() lock(&file_priv->lock) #2 lock(&vdev->submitted_jobs_lock) #1 file_priv_release() lock(&vdev->context_list_lock) lock(&file_priv->lock) #2 This order of locking causes a deadlock. To resolve this issue, change the order of locking in ivpu_job_submit(). | ||||
| CVE-2025-37935 | 1 Linux | 1 Linux Kernel | 2025-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: fix SER panic with 4GB+ RAM If the mtk_poll_rx() function detects the MTK_RESETTING flag, it will jump to release_desc and refill the high word of the SDP on the 4GB RFB. Subsequently, mtk_rx_clean will process an incorrect SDP, leading to a panic. Add patch from MediaTek's SDK to resolve this. | ||||
| CVE-2025-37908 | 1 Linux | 1 Linux Kernel | 2025-11-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm, slab: clean up slab->obj_exts always When memory allocation profiling is disabled at runtime or due to an error, shutdown_mem_profiling() is called: slab->obj_exts which previously allocated remains. It won't be cleared by unaccount_slab() because of mem_alloc_profiling_enabled() not true. It's incorrect, slab->obj_exts should always be cleaned up in unaccount_slab() to avoid following error: [...]BUG: Bad page state in process... .. [...]page dumped because: page still charged to cgroup [andriy.shevchenko@linux.intel.com: fold need_slab_obj_ext() into its only user] | ||||
| CVE-2025-37939 | 1 Linux | 1 Linux Kernel | 2025-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: libbpf: Fix accessing BTF.ext core_relo header Update btf_ext_parse_info() to ensure the core_relo header is present before reading its fields. This avoids a potential buffer read overflow reported by the OSS Fuzz project. | ||||
| CVE-2025-37909 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: lan743x: Fix memleak issue when GSO enabled Always map the `skb` to the LS descriptor. Previously skb was mapped to EXT descriptor when the number of fragments is zero with GSO enabled. Mapping the skb to EXT descriptor prevents it from being freed, leading to a memory leak | ||||
| CVE-2025-37911 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix out-of-bound memcpy() during ethtool -w When retrieving the FW coredump using ethtool, it can sometimes cause memory corruption: BUG: KFENCE: memory corruption in __bnxt_get_coredump+0x3ef/0x670 [bnxt_en] Corrupted memory at 0x000000008f0f30e8 [ ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ] (in kfence-#45): __bnxt_get_coredump+0x3ef/0x670 [bnxt_en] ethtool_get_dump_data+0xdc/0x1a0 __dev_ethtool+0xa1e/0x1af0 dev_ethtool+0xa8/0x170 dev_ioctl+0x1b5/0x580 sock_do_ioctl+0xab/0xf0 sock_ioctl+0x1ce/0x2e0 __x64_sys_ioctl+0x87/0xc0 do_syscall_64+0x5c/0xf0 entry_SYSCALL_64_after_hwframe+0x78/0x80 ... This happens when copying the coredump segment list in bnxt_hwrm_dbg_dma_data() with the HWRM_DBG_COREDUMP_LIST FW command. The info->dest_buf buffer is allocated based on the number of coredump segments returned by the FW. The segment list is then DMA'ed by the FW and the length of the DMA is returned by FW. The driver then copies this DMA'ed segment list to info->dest_buf. In some cases, this DMA length may exceed the info->dest_buf length and cause the above BUG condition. Fix it by capping the copy length to not exceed the length of info->dest_buf. The extra DMA data contains no useful information. This code path is shared for the HWRM_DBG_COREDUMP_LIST and the HWRM_DBG_COREDUMP_RETRIEVE FW commands. The buffering is different for these 2 FW commands. To simplify the logic, we need to move the line to adjust the buffer length for HWRM_DBG_COREDUMP_RETRIEVE up, so that the new check to cap the copy length will work for both commands. | ||||
| CVE-2025-37910 | 1 Linux | 1 Linux Kernel | 2025-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ptp: ocp: Fix NULL dereference in Adva board SMA sysfs operations On Adva boards, SMA sysfs store/get operations can call __handle_signal_outputs() or __handle_signal_inputs() while the `irig` and `dcf` pointers are uninitialized, leading to a NULL pointer dereference in __handle_signal() and causing a kernel crash. Adva boards don't use `irig` or `dcf` functionality, so add Adva-specific callbacks `ptp_ocp_sma_adva_set_outputs()` and `ptp_ocp_sma_adva_set_inputs()` that avoid invoking `irig` or `dcf` input/output routines. | ||||
| CVE-2018-15982 | 6 Adobe, Apple, Google and 3 more | 12 Flash Player, Flash Player Installer, Mac Os X and 9 more | 2025-11-17 | 7.8 High |
| Flash Player versions 31.0.0.153 and earlier, and 31.0.0.108 and earlier have a use after free vulnerability. Successful exploitation could lead to arbitrary code execution. | ||||
| CVE-2025-40364 | 1 Linux | 1 Linux Kernel | 2025-11-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: fix io_req_prep_async with provided buffers io_req_prep_async() can import provided buffers, commit the ring state by giving up on that before, it'll be reimported later if needed. | ||||
| CVE-2025-37941 | 1 Linux | 1 Linux Kernel | 2025-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd937x: fix a potential memory leak in wcd937x_soc_codec_probe() When snd_soc_dapm_new_controls() or snd_soc_dapm_add_routes() fails, wcd937x_soc_codec_probe() returns without releasing 'wcd937x->clsh_info', which is allocated by wcd_clsh_ctrl_alloc. Add wcd_clsh_ctrl_free() to prevent potential memory leak. | ||||
| CVE-2025-37942 | 1 Linux | 1 Linux Kernel | 2025-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: pidff: Make sure to fetch pool before checking SIMULTANEOUS_MAX As noted by Anssi some 20 years ago, pool report is sometimes messed up. This worked fine on many devices but casued oops on VRS DirectForce PRO. Here, we're making sure pool report is refetched before trying to access any of it's fields. While loop was replaced with a for loop + exit conditions were moved aroud to decrease the possibility of creating an infinite loop scenario. | ||||
| CVE-2025-37943 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix invalid data access in ath12k_dp_rx_h_undecap_nwifi In certain cases, hardware might provide packets with a length greater than the maximum native Wi-Fi header length. This can lead to accessing and modifying fields in the header within the ath12k_dp_rx_h_undecap_nwifi function for DP_RX_DECAP_TYPE_NATIVE_WIFI decap type and potentially resulting in invalid data access and memory corruption. Add a sanity check before processing the SKB to prevent invalid data access in the undecap native Wi-Fi function for the DP_RX_DECAP_TYPE_NATIVE_WIFI decap type. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2025-37944 | 1 Linux | 1 Linux Kernel | 2025-11-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix invalid entry fetch in ath12k_dp_mon_srng_process Currently, ath12k_dp_mon_srng_process uses ath12k_hal_srng_src_get_next_entry to fetch the next entry from the destination ring. This is incorrect because ath12k_hal_srng_src_get_next_entry is intended for source rings, not destination rings. This leads to invalid entry fetches, causing potential data corruption or crashes due to accessing incorrect memory locations. This happens because the source ring and destination ring have different handling mechanisms and using the wrong function results in incorrect pointer arithmetic and ring management. To fix this issue, replace the call to ath12k_hal_srng_src_get_next_entry with ath12k_hal_srng_dst_get_next_entry in ath12k_dp_mon_srng_process. This ensures that the correct function is used for fetching entries from the destination ring, preventing invalid memory accesses. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 | ||||
| CVE-2025-37945 | 1 Linux | 1 Linux Kernel | 2025-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY DSA has 2 kinds of drivers: 1. Those who call dsa_switch_suspend() and dsa_switch_resume() from their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz 2. Those who don't: all others. The above methods should be optional. For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(), and dsa_switch_resume() calls dsa_user_resume() -> phylink_start(). These seem good candidates for setting mac_managed_pm = true because that is essentially its definition [1], but that does not seem to be the biggest problem for now, and is not what this change focuses on. Talking strictly about the 2nd category of DSA drivers here (which do not have MAC managed PM, meaning that for their attached PHYs, mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full), I have noticed that the following warning from mdio_bus_phy_resume() is triggered: WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY && phydev->state != PHY_UP); because the PHY state machine is running. It's running as a result of a previous dsa_user_open() -> ... -> phylink_start() -> phy_start() having been initiated by the user. The previous mdio_bus_phy_suspend() was supposed to have called phy_stop_machine(), but it didn't. So this is why the PHY is in state PHY_NOLINK by the time mdio_bus_phy_resume() runs. mdio_bus_phy_suspend() did not call phy_stop_machine() because for phylink, the phydev->adjust_link function pointer is NULL. This seems a technicality introduced by commit fddd91016d16 ("phylib: fix PAL state machine restart on resume"). That commit was written before phylink existed, and was intended to avoid crashing with consumer drivers which don't use the PHY state machine - phylink always does, when using a PHY. But phylink itself has historically not been developed with suspend/resume in mind, and apparently not tested too much in that scenario, allowing this bug to exist unnoticed for so long. Plus, prior to the WARN_ON(), it would have likely been invisible. This issue is not in fact restricted to type 2 DSA drivers (according to the above ad-hoc classification), but can be extrapolated to any MAC driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where the issue was reported. Assuming mac_managed_pm is set correctly, a quick search indicates the following other drivers might be affected: $ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm drivers/net/ethernet/atheros/ag71xx.c drivers/net/ethernet/microchip/sparx5/sparx5_main.c drivers/net/ethernet/microchip/lan966x/lan966x_main.c drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c drivers/net/ethernet/freescale/dpaa/dpaa_eth.c drivers/net/ethernet/freescale/ucc_geth.c drivers/net/ethernet/freescale/enetc/enetc_pf_common.c drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c drivers/net/ethernet/marvell/mvneta.c drivers/net/ethernet/marvell/prestera/prestera_main.c drivers/net/ethernet/mediatek/mtk_eth_soc.c drivers/net/ethernet/altera/altera_tse_main.c drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c drivers/net/ethernet/meta/fbnic/fbnic_phylink.c drivers/net/ethernet/tehuti/tn40_phy.c drivers/net/ethernet/mscc/ocelot_net.c Make the existing conditions dependent on the PHY device having a phydev->phy_link_change() implementation equal to the default phy_link_change() provided by phylib. Otherwise, we implicitly know that the phydev has the phylink-provided phylink_phy_change() callback, and when phylink is used, the PHY state machine always needs to be stopped/ started on the suspend/resume path. The code is structured as such that if phydev->phy_link_change() is absent, it is a matter of time until the kernel will crash - no need to further complicate the test. Thus, for the situation where the PM is not managed b ---truncated--- | ||||
| CVE-2025-37946 | 1 Linux | 1 Linux Kernel | 2025-11-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix duplicate pci_dev_put() in disable_slot() when PF has child VFs With commit bcb5d6c76903 ("s390/pci: introduce lock to synchronize state of zpci_dev's") the code to ignore power off of a PF that has child VFs was changed from a direct return to a goto to the unlock and pci_dev_put() section. The change however left the existing pci_dev_put() untouched resulting in a doubple put. This can subsequently cause a use after free if the struct pci_dev is released in an unexpected state. Fix this by removing the extra pci_dev_put(). | ||||
| CVE-2025-37950 | 1 Linux | 1 Linux Kernel | 2025-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix panic in failed foilio allocation commit 7e119cff9d0a ("ocfs2: convert w_pages to w_folios") and commit 9a5e08652dc4b ("ocfs2: use an array of folios instead of an array of pages") save -ENOMEM in the folio array upon allocation failure and call the folio array free code. The folio array free code expects either valid folio pointers or NULL. Finding the -ENOMEM will result in a panic. Fix by NULLing the error folio entry. | ||||
| CVE-2025-37952 | 1 Linux | 1 Linux Kernel | 2025-11-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: Fix UAF in __close_file_table_ids A use-after-free is possible if one thread destroys the file via __ksmbd_close_fd while another thread holds a reference to it. The existing checks on fp->refcount are not sufficient to prevent this. The fix takes ft->lock around the section which removes the file from the file table. This prevents two threads acquiring the same file pointer via __close_file_table_ids, as well as the other functions which retrieve a file from the IDR and which already use this same lock. | ||||
| CVE-2025-38008 | 1 Linux | 1 Linux Kernel | 2025-11-17 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: fix race condition in unaccepted memory handling The page allocator tracks the number of zones that have unaccepted memory using static_branch_enc/dec() and uses that static branch in hot paths to determine if it needs to deal with unaccepted memory. Borislav and Thomas pointed out that the tracking is racy: operations on static_branch are not serialized against adding/removing unaccepted pages to/from the zone. Sanity checks inside static_branch machinery detects it: WARNING: CPU: 0 PID: 10 at kernel/jump_label.c:276 __static_key_slow_dec_cpuslocked+0x8e/0xa0 The comment around the WARN() explains the problem: /* * Warn about the '-1' case though; since that means a * decrement is concurrent with a first (0->1) increment. IOW * people are trying to disable something that wasn't yet fully * enabled. This suggests an ordering problem on the user side. */ The effect of this static_branch optimization is only visible on microbenchmark. Instead of adding more complexity around it, remove it altogether. | ||||
| CVE-2025-38010 | 1 Linux | 1 Linux Kernel | 2025-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking The current implementation uses bias_pad_enable as a reference count to manage the shared bias pad for all UTMI PHYs. However, during system suspension with connected USB devices, multiple power-down requests for the UTMI pad result in a mismatch in the reference count, which in turn produces warnings such as: [ 237.762967] WARNING: CPU: 10 PID: 1618 at tegra186_utmi_pad_power_down+0x160/0x170 [ 237.763103] Call trace: [ 237.763104] tegra186_utmi_pad_power_down+0x160/0x170 [ 237.763107] tegra186_utmi_phy_power_off+0x10/0x30 [ 237.763110] phy_power_off+0x48/0x100 [ 237.763113] tegra_xusb_enter_elpg+0x204/0x500 [ 237.763119] tegra_xusb_suspend+0x48/0x140 [ 237.763122] platform_pm_suspend+0x2c/0xb0 [ 237.763125] dpm_run_callback.isra.0+0x20/0xa0 [ 237.763127] __device_suspend+0x118/0x330 [ 237.763129] dpm_suspend+0x10c/0x1f0 [ 237.763130] dpm_suspend_start+0x88/0xb0 [ 237.763132] suspend_devices_and_enter+0x120/0x500 [ 237.763135] pm_suspend+0x1ec/0x270 The root cause was traced back to the dynamic power-down changes introduced in commit a30951d31b25 ("xhci: tegra: USB2 pad power controls"), where the UTMI pad was being powered down without verifying its current state. This unbalanced behavior led to discrepancies in the reference count. To rectify this issue, this patch replaces the single reference counter with a bitmask, renamed to utmi_pad_enabled. Each bit in the mask corresponds to one of the four USB2 PHYs, allowing us to track each pad's enablement status individually. With this change: - The bias pad is powered on only when the mask is clear. - Each UTMI pad is powered on or down based on its corresponding bit in the mask, preventing redundant operations. - The overall power state of the shared bias pad is maintained correctly during suspend/resume cycles. The mutex used to prevent race conditions during UTMI pad enable/disable operations has been moved from the tegra186_utmi_bias_pad_power_on/off functions to the parent functions tegra186_utmi_pad_power_on/down. This change ensures that there are no race conditions when updating the bitmask. | ||||
| CVE-2025-38011 | 1 Linux | 1 Linux Kernel | 2025-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: csa unmap use uninterruptible lock After process exit to unmap csa and free GPU vm, if signal is accepted and then waiting to take vm lock is interrupted and return, it causes memory leaking and below warning backtrace. Change to use uninterruptible wait lock fix the issue. WARNING: CPU: 69 PID: 167800 at amd/amdgpu/amdgpu_kms.c:1525 amdgpu_driver_postclose_kms+0x294/0x2a0 [amdgpu] Call Trace: <TASK> drm_file_free.part.0+0x1da/0x230 [drm] drm_close_helper.isra.0+0x65/0x70 [drm] drm_release+0x6a/0x120 [drm] amdgpu_drm_release+0x51/0x60 [amdgpu] __fput+0x9f/0x280 ____fput+0xe/0x20 task_work_run+0x67/0xa0 do_exit+0x217/0x3c0 do_group_exit+0x3b/0xb0 get_signal+0x14a/0x8d0 arch_do_signal_or_restart+0xde/0x100 exit_to_user_mode_loop+0xc1/0x1a0 exit_to_user_mode_prepare+0xf4/0x100 syscall_exit_to_user_mode+0x17/0x40 do_syscall_64+0x69/0xc0 (cherry picked from commit 7dbbfb3c171a6f63b01165958629c9c26abf38ab) | ||||