Total
324505 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68188 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: use dst_dev_rcu() in tcp_fastopen_active_disable_ofo_check() Use RCU to avoid a pair of atomic operations and a potential UAF on dst_dev()->flags. | ||||
| CVE-2025-68211 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ksm: use range-walk function to jump over holes in scan_get_next_rmap_item Currently, scan_get_next_rmap_item() walks every page address in a VMA to locate mergeable pages. This becomes highly inefficient when scanning large virtual memory areas that contain mostly unmapped regions, causing ksmd to use large amount of cpu without deduplicating much pages. This patch replaces the per-address lookup with a range walk using walk_page_range(). The range walker allows KSM to skip over entire unmapped holes in a VMA, avoiding unnecessary lookups. This problem was previously discussed in [1]. Consider the following test program which creates a 32 TiB mapping in the virtual address space but only populates a single page: #include <unistd.h> #include <stdio.h> #include <sys/mman.h> /* 32 TiB */ const size_t size = 32ul * 1024 * 1024 * 1024 * 1024; int main() { char *area = mmap(NULL, size, PROT_READ | PROT_WRITE, MAP_NORESERVE | MAP_PRIVATE | MAP_ANON, -1, 0); if (area == MAP_FAILED) { perror("mmap() failed\n"); return -1; } /* Populate a single page such that we get an anon_vma. */ *area = 0; /* Enable KSM. */ madvise(area, size, MADV_MERGEABLE); pause(); return 0; } $ ./ksm-sparse & $ echo 1 > /sys/kernel/mm/ksm/run Without this patch ksmd uses 100% of the cpu for a long time (more then 1 hour in my test machine) scanning all the 32 TiB virtual address space that contain only one mapped page. This makes ksmd essentially deadlocked not able to deduplicate anything of value. With this patch ksmd walks only the one mapped page and skips the rest of the 32 TiB virtual address space, making the scan fast using little cpu. | ||||
| CVE-2025-68209 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mlx5: Fix default values in create CQ Currently, CQs without a completion function are assigned the mlx5_add_cq_to_tasklet function by default. This is problematic since only user CQs created through the mlx5_ib driver are intended to use this function. Additionally, all CQs that will use doorbells instead of polling for completions must call mlx5_cq_arm. However, the default CQ creation flow leaves a valid value in the CQ's arm_db field, allowing FW to send interrupts to polling-only CQs in certain corner cases. These two factors would allow a polling-only kernel CQ to be triggered by an EQ interrupt and call a completion function intended only for user CQs, causing a null pointer exception. Some areas in the driver have prevented this issue with one-off fixes but did not address the root cause. This patch fixes the described issue by adding defaults to the create CQ flow. It adds a default dummy completion function to protect against null pointer exceptions, and it sets an invalid command sequence number by default in kernel CQs to prevent the FW from sending an interrupt to the CQ until it is armed. User CQs are responsible for their own initialization values. Callers of mlx5_core_create_cq are responsible for changing the completion function and arming the CQ per their needs. | ||||
| CVE-2025-68208 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: account for current allocated stack depth in widen_imprecise_scalars() The usage pattern for widen_imprecise_scalars() looks as follows: prev_st = find_prev_entry(env, ...); queued_st = push_stack(...); widen_imprecise_scalars(env, prev_st, queued_st); Where prev_st is an ancestor of the queued_st in the explored states tree. This ancestor is not guaranteed to have same allocated stack depth as queued_st. E.g. in the following case: def main(): for i in 1..2: foo(i) // same callsite, differnt param def foo(i): if i == 1: use 128 bytes of stack iterator based loop Here, for a second 'foo' call prev_st->allocated_stack is 128, while queued_st->allocated_stack is much smaller. widen_imprecise_scalars() needs to take this into account and avoid accessing bpf_verifier_state->frame[*]->stack out of bounds. | ||||
| CVE-2025-68207 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Synchronize Dead CT worker with unbind Cancel and wait for any Dead CT worker to complete before continuing with device unbinding. Else the worker will end up using resources freed by the undind operation. (cherry picked from commit 492671339114e376aaa38626d637a2751cdef263) | ||||
| CVE-2025-68205 | 1 Linux | 1 Linux Kernel | 2025-12-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/hdmi: Fix breakage at probing nvhdmi-mcp driver After restructuring and splitting the HDMI codec driver code, each HDMI codec driver contains the own build_controls and build_pcms ops. A copy-n-paste error put the wrong entries for nvhdmi-mcp driver; both build_controls and build_pcms are swapped. Unfortunately both callbacks have the very same form, and the compiler didn't complain it, either. This resulted in a NULL dereference because the PCM instance hasn't been initialized at calling the build_controls callback. Fix it by passing the proper entries. | ||||
| CVE-2025-68203 | 1 Linux | 1 Linux Kernel | 2025-12-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix lock warning in amdgpu_userq_fence_driver_process Fix a potential deadlock caused by inconsistent spinlock usage between interrupt and process contexts in the userq fence driver. The issue occurs when amdgpu_userq_fence_driver_process() is called from both: - Interrupt context: gfx_v11_0_eop_irq() -> amdgpu_userq_fence_driver_process() - Process context: amdgpu_eviction_fence_suspend_worker() -> amdgpu_userq_fence_driver_force_completion() -> amdgpu_userq_fence_driver_process() In interrupt context, the spinlock was acquired without disabling interrupts, leaving it in {IN-HARDIRQ-W} state. When the same lock is acquired in process context, the kernel detects inconsistent locking since the process context acquisition would enable interrupts while holding a lock previously acquired in interrupt context. Kernel log shows: [ 4039.310790] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 4039.310804] kworker/7:2/409 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 4039.310818] ffff9284e1bed000 (&fence_drv->fence_list_lock){?...}-{3:3}, [ 4039.310993] {IN-HARDIRQ-W} state was registered at: [ 4039.311004] lock_acquire+0xc6/0x300 [ 4039.311018] _raw_spin_lock+0x39/0x80 [ 4039.311031] amdgpu_userq_fence_driver_process.part.0+0x30/0x180 [amdgpu] [ 4039.311146] amdgpu_userq_fence_driver_process+0x17/0x30 [amdgpu] [ 4039.311257] gfx_v11_0_eop_irq+0x132/0x170 [amdgpu] Fix by using spin_lock_irqsave()/spin_unlock_irqrestore() to properly manage interrupt state regardless of calling context. (cherry picked from commit ded3ad780cf97a04927773c4600823b84f7f3cc2) | ||||
| CVE-2025-68200 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Add bpf_prog_run_data_pointers() syzbot found that cls_bpf_classify() is able to change tc_skb_cb(skb)->drop_reason triggering a warning in sk_skb_reason_drop(). WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 __sk_skb_reason_drop net/core/skbuff.c:1189 [inline] WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 sk_skb_reason_drop+0x76/0x170 net/core/skbuff.c:1214 struct tc_skb_cb has been added in commit ec624fe740b4 ("net/sched: Extend qdisc control block with tc control block"), which added a wrong interaction with db58ba459202 ("bpf: wire in data and data_end for cls_act_bpf"). drop_reason was added later. Add bpf_prog_run_data_pointers() helper to save/restore the net_sched storage colliding with BPF data_meta/data_end. | ||||
| CVE-2025-68198 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crash: fix crashkernel resource shrink When crashkernel is configured with a high reservation, shrinking its value below the low crashkernel reservation causes two issues: 1. Invalid crashkernel resource objects 2. Kernel crash if crashkernel shrinking is done twice For example, with crashkernel=200M,high, the kernel reserves 200MB of high memory and some default low memory (say 256MB). The reservation appears as: cat /proc/iomem | grep -i crash af000000-beffffff : Crash kernel 433000000-43f7fffff : Crash kernel If crashkernel is then shrunk to 50MB (echo 52428800 > /sys/kernel/kexec_crash_size), /proc/iomem still shows 256MB reserved: af000000-beffffff : Crash kernel Instead, it should show 50MB: af000000-b21fffff : Crash kernel Further shrinking crashkernel to 40MB causes a kernel crash with the following trace (x86): BUG: kernel NULL pointer dereference, address: 0000000000000038 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI <snip...> Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? page_fault_oops+0x15a/0x2f0 ? search_module_extables+0x19/0x60 ? search_bpf_extables+0x5f/0x80 ? exc_page_fault+0x7e/0x180 ? asm_exc_page_fault+0x26/0x30 ? __release_resource+0xd/0xb0 release_resource+0x26/0x40 __crash_shrink_memory+0xe5/0x110 crash_shrink_memory+0x12a/0x190 kexec_crash_size_store+0x41/0x80 kernfs_fop_write_iter+0x141/0x1f0 vfs_write+0x294/0x460 ksys_write+0x6d/0xf0 <snip...> This happens because __crash_shrink_memory()/kernel/crash_core.c incorrectly updates the crashk_res resource object even when crashk_low_res should be updated. Fix this by ensuring the correct crashkernel resource object is updated when shrinking crashkernel memory. | ||||
| CVE-2025-68197 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix null pointer dereference in bnxt_bs_trace_check_wrap() With older FW, we may get the ASYNC_EVENT_CMPL_EVENT_ID_DBG_BUF_PRODUCER for FW trace data type that has not been initialized. This will result in a crash in bnxt_bs_trace_type_wrap(). Add a guard to check for a valid magic_byte pointer before proceeding. | ||||
| CVE-2025-68194 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: imon: make send_packet() more robust syzbot is reporting that imon has three problems which result in hung tasks due to forever holding device lock [1]. First problem is that when usb_rx_callback_intf0() once got -EPROTO error after ictx->dev_present_intf0 became true, usb_rx_callback_intf0() resubmits urb after printk(), and resubmitted urb causes usb_rx_callback_intf0() to again get -EPROTO error. This results in printk() flooding (RCU stalls). Alan Stern commented [2] that In theory it's okay to resubmit _if_ the driver has a robust error-recovery scheme (such as giving up after some fixed limit on the number of errors or after some fixed time has elapsed, perhaps with a time delay to prevent a flood of errors). Most drivers don't bother to do this; they simply give up right away. This makes them more vulnerable to short-term noise interference during USB transfers, but in reality such interference is quite rare. There's nothing really wrong with giving up right away. but imon has a poor error-recovery scheme which just retries forever; this behavior should be fixed. Since I'm not sure whether it is safe for imon users to give up upon any error code, this patch takes care of only union of error codes chosen from modules in drivers/media/rc/ directory which handle -EPROTO error (i.e. ir_toy, mceusb and igorplugusb). Second problem is that when usb_rx_callback_intf0() once got -EPROTO error before ictx->dev_present_intf0 becomes true, usb_rx_callback_intf0() always resubmits urb due to commit 8791d63af0cf ("[media] imon: don't wedge hardware after early callbacks"). Move the ictx->dev_present_intf0 test introduced by commit 6f6b90c9231a ("[media] imon: don't parse scancodes until intf configured") to immediately before imon_incoming_packet(), or the first problem explained above happens without printk() flooding (i.e. hung task). Third problem is that when usb_rx_callback_intf0() is not called for some reason (e.g. flaky hardware; the reproducer for this problem sometimes prevents usb_rx_callback_intf0() from being called), wait_for_completion_interruptible() in send_packet() never returns (i.e. hung task). As a workaround for such situation, change send_packet() to wait for completion with timeout of 10 seconds. | ||||
| CVE-2025-68193 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Add devm release action to safely tear down CT When a buffer object (BO) is allocated with the XE_BO_FLAG_GGTT_INVALIDATE flag, the driver initiates TLB invalidation requests via the CTB mechanism while releasing the BO. However a premature release of the CTB BO can lead to system crashes, as observed in: Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:h2g_write+0x2f3/0x7c0 [xe] Call Trace: guc_ct_send_locked+0x8b/0x670 [xe] xe_guc_ct_send_locked+0x19/0x60 [xe] send_tlb_invalidation+0xb4/0x460 [xe] xe_gt_tlb_invalidation_ggtt+0x15e/0x2e0 [xe] ggtt_invalidate_gt_tlb.part.0+0x16/0x90 [xe] ggtt_node_remove+0x110/0x140 [xe] xe_ggtt_node_remove+0x40/0xa0 [xe] xe_ggtt_remove_bo+0x87/0x250 [xe] Introduce a devm-managed release action during xe_guc_ct_init() and xe_guc_ct_init_post_hwconfig() to ensure proper CTB disablement before resource deallocation, preventing the use-after-free scenario. | ||||
| CVE-2025-68191 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: udp_tunnel: use netdev_warn() instead of netdev_WARN() netdev_WARN() uses WARN/WARN_ON to print a backtrace along with file and line information. In this case, udp_tunnel_nic_register() returning an error is just a failed operation, not a kernel bug. udp_tunnel_nic_register() can fail due to a memory allocation failure (kzalloc() or udp_tunnel_nic_alloc()). This is a normal runtime error and not a kernel bug. Replace netdev_WARN() with netdev_warn() accordingly. | ||||
| CVE-2025-68190 | 1 Linux | 1 Linux Kernel | 2025-12-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/atom: Check kcalloc() for WS buffer in amdgpu_atom_execute_table_locked() kcalloc() may fail. When WS is non-zero and allocation fails, ectx.ws remains NULL while ectx.ws_size is set, leading to a potential NULL pointer dereference in atom_get_src_int() when accessing WS entries. Return -ENOMEM on allocation failure to avoid the NULL dereference. | ||||
| CVE-2025-68183 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ima: don't clear IMA_DIGSIG flag when setting or removing non-IMA xattr Currently when both IMA and EVM are in fix mode, the IMA signature will be reset to IMA hash if a program first stores IMA signature in security.ima and then writes/removes some other security xattr for the file. For example, on Fedora, after booting the kernel with "ima_appraise=fix evm=fix ima_policy=appraise_tcb" and installing rpm-plugin-ima, installing/reinstalling a package will not make good reference IMA signature generated. Instead IMA hash is generated, # getfattr -m - -d -e hex /usr/bin/bash # file: usr/bin/bash security.ima=0x0404... This happens because when setting security.selinux, the IMA_DIGSIG flag that had been set early was cleared. As a result, IMA hash is generated when the file is closed. Similarly, IMA signature can be cleared on file close after removing security xattr like security.evm or setting/removing ACL. Prevent replacing the IMA file signature with a file hash, by preventing the IMA_DIGSIG flag from being reset. Here's a minimal C reproducer which sets security.selinux as the last step which can also replaced by removing security.evm or setting ACL, #include <stdio.h> #include <sys/xattr.h> #include <fcntl.h> #include <unistd.h> #include <string.h> #include <stdlib.h> int main() { const char* file_path = "/usr/sbin/test_binary"; const char* hex_string = "030204d33204490066306402304"; int length = strlen(hex_string); char* ima_attr_value; int fd; fd = open(file_path, O_WRONLY|O_CREAT|O_EXCL, 0644); if (fd == -1) { perror("Error opening file"); return 1; } ima_attr_value = (char*)malloc(length / 2 ); for (int i = 0, j = 0; i < length; i += 2, j++) { sscanf(hex_string + i, "%2hhx", &ima_attr_value[j]); } if (fsetxattr(fd, "security.ima", ima_attr_value, length/2, 0) == -1) { perror("Error setting extended attribute"); close(fd); return 1; } const char* selinux_value= "system_u:object_r:bin_t:s0"; if (fsetxattr(fd, "security.selinux", selinux_value, strlen(selinux_value), 0) == -1) { perror("Error setting extended attribute"); close(fd); return 1; } close(fd); return 0; } | ||||
| CVE-2025-40355 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sysfs: check visibility before changing group attribute ownership Since commit 0c17270f9b92 ("net: sysfs: Implement is_visible for phys_(port_id, port_name, switch_id)"), __dev_change_net_namespace() can hit WARN_ON() when trying to change owner of a file that isn't visible. See the trace below: WARNING: CPU: 6 PID: 2938 at net/core/dev.c:12410 __dev_change_net_namespace+0xb89/0xc30 CPU: 6 UID: 0 PID: 2938 Comm: incusd Not tainted 6.17.1-1-mainline #1 PREEMPT(full) 4b783b4a638669fb644857f484487d17cb45ed1f Hardware name: Framework Laptop 13 (AMD Ryzen 7040Series)/FRANMDCP07, BIOS 03.07 02/19/2025 RIP: 0010:__dev_change_net_namespace+0xb89/0xc30 [...] Call Trace: <TASK> ? if6_seq_show+0x30/0x50 do_setlink.isra.0+0xc7/0x1270 ? __nla_validate_parse+0x5c/0xcc0 ? security_capable+0x94/0x1a0 rtnl_newlink+0x858/0xc20 ? update_curr+0x8e/0x1c0 ? update_entity_lag+0x71/0x80 ? sched_balance_newidle+0x358/0x450 ? psi_task_switch+0x113/0x2a0 ? __pfx_rtnl_newlink+0x10/0x10 rtnetlink_rcv_msg+0x346/0x3e0 ? sched_clock+0x10/0x30 ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x59/0x110 netlink_unicast+0x285/0x3c0 ? __alloc_skb+0xdb/0x1a0 netlink_sendmsg+0x20d/0x430 ____sys_sendmsg+0x39f/0x3d0 ? import_iovec+0x2f/0x40 ___sys_sendmsg+0x99/0xe0 __sys_sendmsg+0x8a/0xf0 do_syscall_64+0x81/0x970 ? __sys_bind+0xe3/0x110 ? syscall_exit_work+0x143/0x1b0 ? do_syscall_64+0x244/0x970 ? sock_alloc_file+0x63/0xc0 ? syscall_exit_work+0x143/0x1b0 ? do_syscall_64+0x244/0x970 ? alloc_fd+0x12e/0x190 ? put_unused_fd+0x2a/0x70 ? do_sys_openat2+0xa2/0xe0 ? syscall_exit_work+0x143/0x1b0 ? do_syscall_64+0x244/0x970 ? exc_page_fault+0x7e/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] </TASK> Fix this by checking is_visible() before trying to touch the attribute. | ||||
| CVE-2025-40353 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64: mte: Do not warn if the page is already tagged in copy_highpage() The arm64 copy_highpage() assumes that the destination page is newly allocated and not MTE-tagged (PG_mte_tagged unset) and warns accordingly. However, following commit 060913999d7a ("mm: migrate: support poisoned recover from migrate folio"), folio_mc_copy() is called before __folio_migrate_mapping(). If the latter fails (-EAGAIN), the copy will be done again to the same destination page. Since copy_highpage() already set the PG_mte_tagged flag, this second copy will warn. Replace the WARN_ON_ONCE(page already tagged) in the arm64 copy_highpage() with a comment. | ||||
| CVE-2025-40352 | 1 Linux | 1 Linux Kernel | 2025-12-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/mellanox: mlxbf-pmc: add sysfs_attr_init() to count_clock init The lock-related debug logic (CONFIG_LOCK_STAT) in the kernel is noting the following warning when the BlueField-3 SOC is booted: BUG: key ffff00008a3402a8 has not been registered! ------------[ cut here ]------------ DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 4 PID: 592 at kernel/locking/lockdep.c:4801 lockdep_init_map_type+0x1d4/0x2a0 <snip> Call trace: lockdep_init_map_type+0x1d4/0x2a0 __kernfs_create_file+0x84/0x140 sysfs_add_file_mode_ns+0xcc/0x1cc internal_create_group+0x110/0x3d4 internal_create_groups.part.0+0x54/0xcc sysfs_create_groups+0x24/0x40 device_add+0x6e8/0x93c device_register+0x28/0x40 __hwmon_device_register+0x4b0/0x8a0 devm_hwmon_device_register_with_groups+0x7c/0xe0 mlxbf_pmc_probe+0x1e8/0x3e0 [mlxbf_pmc] platform_probe+0x70/0x110 The mlxbf_pmc driver must call sysfs_attr_init() during the initialization of the "count_clock" data structure to avoid this warning. | ||||
| CVE-2025-40351 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix KMSAN uninit-value issue in hfsplus_delete_cat() The syzbot reported issue in hfsplus_delete_cat(): [ 70.682285][ T9333] ===================================================== [ 70.682943][ T9333] BUG: KMSAN: uninit-value in hfsplus_subfolders_dec+0x1d7/0x220 [ 70.683640][ T9333] hfsplus_subfolders_dec+0x1d7/0x220 [ 70.684141][ T9333] hfsplus_delete_cat+0x105d/0x12b0 [ 70.684621][ T9333] hfsplus_rmdir+0x13d/0x310 [ 70.685048][ T9333] vfs_rmdir+0x5ba/0x810 [ 70.685447][ T9333] do_rmdir+0x964/0xea0 [ 70.685833][ T9333] __x64_sys_rmdir+0x71/0xb0 [ 70.686260][ T9333] x64_sys_call+0xcd8/0x3cf0 [ 70.686695][ T9333] do_syscall_64+0xd9/0x1d0 [ 70.687119][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.687646][ T9333] [ 70.687856][ T9333] Uninit was stored to memory at: [ 70.688311][ T9333] hfsplus_subfolders_inc+0x1c2/0x1d0 [ 70.688779][ T9333] hfsplus_create_cat+0x148e/0x1800 [ 70.689231][ T9333] hfsplus_mknod+0x27f/0x600 [ 70.689730][ T9333] hfsplus_mkdir+0x5a/0x70 [ 70.690146][ T9333] vfs_mkdir+0x483/0x7a0 [ 70.690545][ T9333] do_mkdirat+0x3f2/0xd30 [ 70.690944][ T9333] __x64_sys_mkdir+0x9a/0xf0 [ 70.691380][ T9333] x64_sys_call+0x2f89/0x3cf0 [ 70.691816][ T9333] do_syscall_64+0xd9/0x1d0 [ 70.692229][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.692773][ T9333] [ 70.692990][ T9333] Uninit was stored to memory at: [ 70.693469][ T9333] hfsplus_subfolders_inc+0x1c2/0x1d0 [ 70.693960][ T9333] hfsplus_create_cat+0x148e/0x1800 [ 70.694438][ T9333] hfsplus_fill_super+0x21c1/0x2700 [ 70.694911][ T9333] mount_bdev+0x37b/0x530 [ 70.695320][ T9333] hfsplus_mount+0x4d/0x60 [ 70.695729][ T9333] legacy_get_tree+0x113/0x2c0 [ 70.696167][ T9333] vfs_get_tree+0xb3/0x5c0 [ 70.696588][ T9333] do_new_mount+0x73e/0x1630 [ 70.697013][ T9333] path_mount+0x6e3/0x1eb0 [ 70.697425][ T9333] __se_sys_mount+0x733/0x830 [ 70.697857][ T9333] __x64_sys_mount+0xe4/0x150 [ 70.698269][ T9333] x64_sys_call+0x2691/0x3cf0 [ 70.698704][ T9333] do_syscall_64+0xd9/0x1d0 [ 70.699117][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.699730][ T9333] [ 70.699946][ T9333] Uninit was created at: [ 70.700378][ T9333] __alloc_pages_noprof+0x714/0xe60 [ 70.700843][ T9333] alloc_pages_mpol_noprof+0x2a2/0x9b0 [ 70.701331][ T9333] alloc_pages_noprof+0xf8/0x1f0 [ 70.701774][ T9333] allocate_slab+0x30e/0x1390 [ 70.702194][ T9333] ___slab_alloc+0x1049/0x33a0 [ 70.702635][ T9333] kmem_cache_alloc_lru_noprof+0x5ce/0xb20 [ 70.703153][ T9333] hfsplus_alloc_inode+0x5a/0xd0 [ 70.703598][ T9333] alloc_inode+0x82/0x490 [ 70.703984][ T9333] iget_locked+0x22e/0x1320 [ 70.704428][ T9333] hfsplus_iget+0x5c/0xba0 [ 70.704827][ T9333] hfsplus_btree_open+0x135/0x1dd0 [ 70.705291][ T9333] hfsplus_fill_super+0x1132/0x2700 [ 70.705776][ T9333] mount_bdev+0x37b/0x530 [ 70.706171][ T9333] hfsplus_mount+0x4d/0x60 [ 70.706579][ T9333] legacy_get_tree+0x113/0x2c0 [ 70.707019][ T9333] vfs_get_tree+0xb3/0x5c0 [ 70.707444][ T9333] do_new_mount+0x73e/0x1630 [ 70.707865][ T9333] path_mount+0x6e3/0x1eb0 [ 70.708270][ T9333] __se_sys_mount+0x733/0x830 [ 70.708711][ T9333] __x64_sys_mount+0xe4/0x150 [ 70.709158][ T9333] x64_sys_call+0x2691/0x3cf0 [ 70.709630][ T9333] do_syscall_64+0xd9/0x1d0 [ 70.710053][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.710611][ T9333] [ 70.710842][ T9333] CPU: 3 UID: 0 PID: 9333 Comm: repro Not tainted 6.12.0-rc6-dirty #17 [ 70.711568][ T9333] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.712490][ T9333] ===================================================== [ 70.713085][ T9333] Disabling lock debugging due to kernel taint [ 70.713618][ T9333] Kernel panic - not syncing: kmsan.panic set ... [ 70.714159][ T9333] ---truncated--- | ||||
| CVE-2025-40350 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix generating skb from non-linear xdp_buff for striding RQ XDP programs can change the layout of an xdp_buff through bpf_xdp_adjust_tail() and bpf_xdp_adjust_head(). Therefore, the driver cannot assume the size of the linear data area nor fragments. Fix the bug in mlx5 by generating skb according to xdp_buff after XDP programs run. Currently, when handling multi-buf XDP, the mlx5 driver assumes the layout of an xdp_buff to be unchanged. That is, the linear data area continues to be empty and fragments remain the same. This may cause the driver to generate erroneous skb or triggering a kernel warning. When an XDP program added linear data through bpf_xdp_adjust_head(), the linear data will be ignored as mlx5e_build_linear_skb() builds an skb without linear data and then pull data from fragments to fill the linear data area. When an XDP program has shrunk the non-linear data through bpf_xdp_adjust_tail(), the delta passed to __pskb_pull_tail() may exceed the actual nonlinear data size and trigger the BUG_ON in it. To fix the issue, first record the original number of fragments. If the number of fragments changes after the XDP program runs, rewind the end fragment pointer by the difference and recalculate the truesize. Then, build the skb with the linear data area matching the xdp_buff. Finally, only pull data in if there is non-linear data and fill the linear part up to 256 bytes. | ||||