Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
16215 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38343 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: drop fragments with multicast or broadcast RA IEEE 802.11 fragmentation can only be applied to unicast frames. Therefore, drop fragments with multicast or broadcast RA. This patch addresses vulnerabilities such as CVE-2020-26145. | ||||
| CVE-2025-38349 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: eventpoll: don't decrement ep refcount while still holding the ep mutex Jann Horn points out that epoll is decrementing the ep refcount and then doing a mutex_unlock(&ep->mtx); afterwards. That's very wrong, because it can lead to a use-after-free. That pattern is actually fine for the very last reference, because the code in question will delay the actual call to "ep_free(ep)" until after it has unlocked the mutex. But it's wrong for the much subtler "next to last" case when somebody *else* may also be dropping their reference and free the ep while we're still using the mutex. Note that this is true even if that other user is also using the same ep mutex: mutexes, unlike spinlocks, can not be used for object ownership, even if they guarantee mutual exclusion. A mutex "unlock" operation is not atomic, and as one user is still accessing the mutex as part of unlocking it, another user can come in and get the now released mutex and free the data structure while the first user is still cleaning up. See our mutex documentation in Documentation/locking/mutex-design.rst, in particular the section [1] about semantics: "mutex_unlock() may access the mutex structure even after it has internally released the lock already - so it's not safe for another context to acquire the mutex and assume that the mutex_unlock() context is not using the structure anymore" So if we drop our ep ref before the mutex unlock, but we weren't the last one, we may then unlock the mutex, another user comes in, drops _their_ reference and releases the 'ep' as it now has no users - all while the mutex_unlock() is still accessing it. Fix this by simply moving the ep refcount dropping to outside the mutex: the refcount itself is atomic, and doesn't need mutex protection (that's the whole _point_ of refcounts: unlike mutexes, they are inherently about object lifetimes). | ||||
| CVE-2025-38351 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/hyper-v: Skip non-canonical addresses during PV TLB flush In KVM guests with Hyper-V hypercalls enabled, the hypercalls HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST and HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST_EX allow a guest to request invalidation of portions of a virtual TLB. For this, the hypercall parameter includes a list of GVAs that are supposed to be invalidated. However, when non-canonical GVAs are passed, there is currently no filtering in place and they are eventually passed to checked invocations of INVVPID on Intel / INVLPGA on AMD. While AMD's INVLPGA silently ignores non-canonical addresses (effectively a no-op), Intel's INVVPID explicitly signals VM-Fail and ultimately triggers the WARN_ONCE in invvpid_error(): invvpid failed: ext=0x0 vpid=1 gva=0xaaaaaaaaaaaaa000 WARNING: CPU: 6 PID: 326 at arch/x86/kvm/vmx/vmx.c:482 invvpid_error+0x91/0xa0 [kvm_intel] Modules linked in: kvm_intel kvm 9pnet_virtio irqbypass fuse CPU: 6 UID: 0 PID: 326 Comm: kvm-vm Not tainted 6.15.0 #14 PREEMPT(voluntary) RIP: 0010:invvpid_error+0x91/0xa0 [kvm_intel] Call Trace: vmx_flush_tlb_gva+0x320/0x490 [kvm_intel] kvm_hv_vcpu_flush_tlb+0x24f/0x4f0 [kvm] kvm_arch_vcpu_ioctl_run+0x3013/0x5810 [kvm] Hyper-V documents that invalid GVAs (those that are beyond a partition's GVA space) are to be ignored. While not completely clear whether this ruling also applies to non-canonical GVAs, it is likely fine to make that assumption, and manual testing on Azure confirms "real" Hyper-V interprets the specification in the same way. Skip non-canonical GVAs when processing the list of address to avoid tripping the INVVPID failure. Alternatively, KVM could filter out "bad" GVAs before inserting into the FIFO, but practically speaking the only downside of pushing validation to the final processing is that doing so is suboptimal for the guest, and no well-behaved guest will request TLB flushes for non-canonical addresses. | ||||
| CVE-2025-38353 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix taking invalid lock on wedge If device wedges on e.g. GuC upload, the submission is not yet enabled and the state is not even initialized. Protect the wedge call so it does nothing in this case. It fixes the following splat: [] xe 0000:bf:00.0: [drm] device wedged, needs recovery [] ------------[ cut here ]------------ [] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [] WARNING: CPU: 48 PID: 312 at kernel/locking/mutex.c:564 __mutex_lock+0x8a1/0xe60 ... [] RIP: 0010:__mutex_lock+0x8a1/0xe60 [] mutex_lock_nested+0x1b/0x30 [] xe_guc_submit_wedge+0x80/0x2b0 [xe] | ||||
| CVE-2025-38355 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Process deferred GGTT node removals on device unwind While we are indirectly draining our dedicated workqueue ggtt->wq that we use to complete asynchronous removal of some GGTT nodes, this happends as part of the managed-drm unwinding (ggtt_fini_early), which could be later then manage-device unwinding, where we could already unmap our MMIO/GMS mapping (mmio_fini). This was recently observed during unsuccessful VF initialization: [ ] xe 0000:00:02.1: probe with driver xe failed with error -62 [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747340 __xe_bo_unpin_map_no_vm (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747540 __xe_bo_unpin_map_no_vm (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747240 __xe_bo_unpin_map_no_vm (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747040 tiles_fini (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e746840 mmio_fini (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747f40 xe_bo_pinned_fini (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e746b40 devm_drm_dev_init_release (16 bytes) [ ] xe 0000:00:02.1: [drm:drm_managed_release] drmres release begin [ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef81640 __fini_relay (8 bytes) [ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80d40 guc_ct_fini (8 bytes) [ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80040 __drmm_mutex_release (8 bytes) [ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80140 ggtt_fini_early (8 bytes) and this was leading to: [ ] BUG: unable to handle page fault for address: ffffc900058162a0 [ ] #PF: supervisor write access in kernel mode [ ] #PF: error_code(0x0002) - not-present page [ ] Oops: Oops: 0002 [#1] SMP NOPTI [ ] Tainted: [W]=WARN [ ] Workqueue: xe-ggtt-wq ggtt_node_remove_work_func [xe] [ ] RIP: 0010:xe_ggtt_set_pte+0x6d/0x350 [xe] [ ] Call Trace: [ ] <TASK> [ ] xe_ggtt_clear+0xb0/0x270 [xe] [ ] ggtt_node_remove+0xbb/0x120 [xe] [ ] ggtt_node_remove_work_func+0x30/0x50 [xe] [ ] process_one_work+0x22b/0x6f0 [ ] worker_thread+0x1e8/0x3d Add managed-device action that will explicitly drain the workqueue with all pending node removals prior to releasing MMIO/GSM mapping. (cherry picked from commit 89d2835c3680ab1938e22ad81b1c9f8c686bd391) | ||||
| CVE-2025-38356 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Explicitly exit CT safe mode on unwind During driver probe we might be briefly using CT safe mode, which is based on a delayed work, but usually we are able to stop this once we have IRQ fully operational. However, if we abort the probe quite early then during unwind we might try to destroy the workqueue while there is still a pending delayed work that attempts to restart itself which triggers a WARN. This was recently observed during unsuccessful VF initialization: [ ] xe 0000:00:02.1: probe with driver xe failed with error -62 [ ] ------------[ cut here ]------------ [ ] workqueue: cannot queue safe_mode_worker_func [xe] on wq xe-g2h-wq [ ] WARNING: CPU: 9 PID: 0 at kernel/workqueue.c:2257 __queue_work+0x287/0x710 [ ] RIP: 0010:__queue_work+0x287/0x710 [ ] Call Trace: [ ] delayed_work_timer_fn+0x19/0x30 [ ] call_timer_fn+0xa1/0x2a0 Exit the CT safe mode on unwind to avoid that warning. (cherry picked from commit 2ddbb73ec20b98e70a5200cb85deade22ccea2ec) | ||||
| CVE-2022-50138 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/qedr: Fix potential memory leak in __qedr_alloc_mr() __qedr_alloc_mr() allocates a memory chunk for "mr->info.pbl_table" with init_mr_info(). When rdma_alloc_tid() and rdma_register_tid() fail, "mr" is released while "mr->info.pbl_table" is not released, which will lead to a memory leak. We should release the "mr->info.pbl_table" with qedr_free_pbl() when error occurs to fix the memory leak. | ||||
| CVE-2022-50139 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: aspeed-vhub: Fix refcount leak bug in ast_vhub_init_desc() We should call of_node_put() for the reference returned by of_get_child_by_name() which has increased the refcount. | ||||
| CVE-2022-50140 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: memstick/ms_block: Fix a memory leak 'erased_blocks_bitmap' is never freed. As it is allocated at the same time as 'used_blocks_bitmap', it is likely that it should be freed also at the same time. Add the corresponding bitmap_free() in msb_data_clear(). | ||||
| CVE-2022-50141 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-of-esdhc: Fix refcount leak in esdhc_signal_voltage_switch of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. of_node_put() checks null pointer. | ||||
| CVE-2022-50092 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm thin: fix use-after-free crash in dm_sm_register_threshold_callback Fault inject on pool metadata device reports: BUG: KASAN: use-after-free in dm_pool_register_metadata_threshold+0x40/0x80 Read of size 8 at addr ffff8881b9d50068 by task dmsetup/950 CPU: 7 PID: 950 Comm: dmsetup Tainted: G W 5.19.0-rc6 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_address_description.constprop.0.cold+0xeb/0x3f4 kasan_report.cold+0xe6/0x147 dm_pool_register_metadata_threshold+0x40/0x80 pool_ctr+0xa0a/0x1150 dm_table_add_target+0x2c8/0x640 table_load+0x1fd/0x430 ctl_ioctl+0x2c4/0x5a0 dm_ctl_ioctl+0xa/0x10 __x64_sys_ioctl+0xb3/0xd0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 This can be easily reproduced using: echo offline > /sys/block/sda/device/state dd if=/dev/zero of=/dev/mapper/thin bs=4k count=10 dmsetup load pool --table "0 20971520 thin-pool /dev/sda /dev/sdb 128 0 0" If a metadata commit fails, the transaction will be aborted and the metadata space maps will be destroyed. If a DM table reload then happens for this failed thin-pool, a use-after-free will occur in dm_sm_register_threshold_callback (called from dm_pool_register_metadata_threshold). Fix this by in dm_pool_register_metadata_threshold() by returning the -EINVAL error if the thin-pool is in fail mode. Also fail pool_ctr() with a new error message: "Error registering metadata threshold". | ||||
| CVE-2022-50095 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: Cleanup CPU timers before freeing them during exec Commit 55e8c8eb2c7b ("posix-cpu-timers: Store a reference to a pid not a task") started looking up tasks by PID when deleting a CPU timer. When a non-leader thread calls execve, it will switch PIDs with the leader process. Then, as it calls exit_itimers, posix_cpu_timer_del cannot find the task because the timer still points out to the old PID. That means that armed timers won't be disarmed, that is, they won't be removed from the timerqueue_list. exit_itimers will still release their memory, and when that list is later processed, it leads to a use-after-free. Clean up the timers from the de-threaded task before freeing them. This prevents a reported use-after-free. | ||||
| CVE-2022-50094 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: spmi: trace: fix stack-out-of-bound access in SPMI tracing functions trace_spmi_write_begin() and trace_spmi_read_end() both call memcpy() with a length of "len + 1". This leads to one extra byte being read beyond the end of the specified buffer. Fix this out-of-bound memory access by using a length of "len" instead. Here is a KASAN log showing the issue: BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_spmi_read_end+0x1d0/0x234 Read of size 2 at addr ffffffc0265b7540 by task thermal@2.0-ser/1314 ... Call trace: dump_backtrace+0x0/0x3e8 show_stack+0x2c/0x3c dump_stack_lvl+0xdc/0x11c print_address_description+0x74/0x384 kasan_report+0x188/0x268 kasan_check_range+0x270/0x2b0 memcpy+0x90/0xe8 trace_event_raw_event_spmi_read_end+0x1d0/0x234 spmi_read_cmd+0x294/0x3ac spmi_ext_register_readl+0x84/0x9c regmap_spmi_ext_read+0x144/0x1b0 [regmap_spmi] _regmap_raw_read+0x40c/0x754 regmap_raw_read+0x3a0/0x514 regmap_bulk_read+0x418/0x494 adc5_gen3_poll_wait_hs+0xe8/0x1e0 [qcom_spmi_adc5_gen3] ... __arm64_sys_read+0x4c/0x60 invoke_syscall+0x80/0x218 el0_svc_common+0xec/0x1c8 ... addr ffffffc0265b7540 is located in stack of task thermal@2.0-ser/1314 at offset 32 in frame: adc5_gen3_poll_wait_hs+0x0/0x1e0 [qcom_spmi_adc5_gen3] this frame has 1 object: [32, 33) 'status' Memory state around the buggy address: ffffffc0265b7400: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 ffffffc0265b7480: 04 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffc0265b7500: 00 00 00 00 f1 f1 f1 f1 01 f3 f3 f3 00 00 00 00 ^ ffffffc0265b7580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffc0265b7600: f1 f1 f1 f1 01 f2 07 f2 f2 f2 01 f3 00 00 00 00 ================================================================== | ||||
| CVE-2022-50093 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE) KASAN reports: [ 4.668325][ T0] BUG: KASAN: wild-memory-access in dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497) [ 4.676149][ T0] Read of size 8 at addr 1fffffff85115558 by task swapper/0/0 [ 4.683454][ T0] [ 4.685638][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc3-00004-g0e862838f290 #1 [ 4.694331][ T0] Hardware name: Supermicro SYS-5018D-FN4T/X10SDV-8C-TLN4F, BIOS 1.1 03/02/2016 [ 4.703196][ T0] Call Trace: [ 4.706334][ T0] <TASK> [ 4.709133][ T0] ? dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497) after converting the type of the first argument (@nr, bit number) of arch_test_bit() from `long` to `unsigned long`[0]. Under certain conditions (for example, when ACPI NUMA is disabled via command line), pxm_to_node() can return %NUMA_NO_NODE (-1). It is valid 'magic' number of NUMA node, but not valid bit number to use in bitops. node_online() eventually descends to test_bit() without checking for the input, assuming it's on caller side (which might be good for perf-critical tasks). There, -1 becomes %ULONG_MAX which leads to an insane array index when calculating bit position in memory. For now, add an explicit check for @node being not %NUMA_NO_NODE before calling test_bit(). The actual logics didn't change here at all. [0] https://github.com/norov/linux/commit/0e862838f290147ea9c16db852d8d494b552d38d | ||||
| CVE-2022-50080 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tee: add overflow check in register_shm_helper() With special lengths supplied by user space, register_shm_helper() has an integer overflow when calculating the number of pages covered by a supplied user space memory region. This causes internal_get_user_pages_fast() a helper function of pin_user_pages_fast() to do a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 Modules linked in: CPU: 1 PID: 173 Comm: optee_example_a Not tainted 5.19.0 #11 Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 pc : internal_get_user_pages_fast+0x474/0xa80 Call trace: internal_get_user_pages_fast+0x474/0xa80 pin_user_pages_fast+0x24/0x4c register_shm_helper+0x194/0x330 tee_shm_register_user_buf+0x78/0x120 tee_ioctl+0xd0/0x11a0 __arm64_sys_ioctl+0xa8/0xec invoke_syscall+0x48/0x114 Fix this by adding an an explicit call to access_ok() in tee_shm_register_user_buf() to catch an invalid user space address early. | ||||
| CVE-2022-50085 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm raid: fix address sanitizer warning in raid_resume There is a KASAN warning in raid_resume when running the lvm test lvconvert-raid.sh. The reason for the warning is that mddev->raid_disks is greater than rs->raid_disks, so the loop touches one entry beyond the allocated length. | ||||
| CVE-2022-50087 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scpi: Ensure scpi_info is not assigned if the probe fails When scpi probe fails, at any point, we need to ensure that the scpi_info is not set and will remain NULL until the probe succeeds. If it is not taken care, then it could result use-after-free as the value is exported via get_scpi_ops() and could refer to a memory allocated via devm_kzalloc() but freed when the probe fails. | ||||
| CVE-2022-50088 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/reclaim: fix potential memory leak in damon_reclaim_init() damon_reclaim_init() allocates a memory chunk for ctx with damon_new_ctx(). When damon_select_ops() fails, ctx is not released, which will lead to a memory leak. We should release the ctx with damon_destroy_ctx() when damon_select_ops() fails to fix the memory leak. | ||||
| CVE-2022-50089 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: ensure pages are unlocked on cow_file_range() failure There is a hung_task report on zoned btrfs like below. https://github.com/naota/linux/issues/59 [726.328648] INFO: task rocksdb:high0:11085 blocked for more than 241 seconds. [726.329839] Not tainted 5.16.0-rc1+ #1 [726.330484] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [726.331603] task:rocksdb:high0 state:D stack: 0 pid:11085 ppid: 11082 flags:0x00000000 [726.331608] Call Trace: [726.331611] <TASK> [726.331614] __schedule+0x2e5/0x9d0 [726.331622] schedule+0x58/0xd0 [726.331626] io_schedule+0x3f/0x70 [726.331629] __folio_lock+0x125/0x200 [726.331634] ? find_get_entries+0x1bc/0x240 [726.331638] ? filemap_invalidate_unlock_two+0x40/0x40 [726.331642] truncate_inode_pages_range+0x5b2/0x770 [726.331649] truncate_inode_pages_final+0x44/0x50 [726.331653] btrfs_evict_inode+0x67/0x480 [726.331658] evict+0xd0/0x180 [726.331661] iput+0x13f/0x200 [726.331664] do_unlinkat+0x1c0/0x2b0 [726.331668] __x64_sys_unlink+0x23/0x30 [726.331670] do_syscall_64+0x3b/0xc0 [726.331674] entry_SYSCALL_64_after_hwframe+0x44/0xae [726.331677] RIP: 0033:0x7fb9490a171b [726.331681] RSP: 002b:00007fb943ffac68 EFLAGS: 00000246 ORIG_RAX: 0000000000000057 [726.331684] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fb9490a171b [726.331686] RDX: 00007fb943ffb040 RSI: 000055a6bbe6ec20 RDI: 00007fb94400d300 [726.331687] RBP: 00007fb943ffad00 R08: 0000000000000000 R09: 0000000000000000 [726.331688] R10: 0000000000000031 R11: 0000000000000246 R12: 00007fb943ffb000 [726.331690] R13: 00007fb943ffb040 R14: 0000000000000000 R15: 00007fb943ffd260 [726.331693] </TASK> While we debug the issue, we found running fstests generic/551 on 5GB non-zoned null_blk device in the emulated zoned mode also had a similar hung issue. Also, we can reproduce the same symptom with an error injected cow_file_range() setup. The hang occurs when cow_file_range() fails in the middle of allocation. cow_file_range() called from do_allocation_zoned() can split the give region ([start, end]) for allocation depending on current block group usages. When btrfs can allocate bytes for one part of the split regions but fails for the other region (e.g. because of -ENOSPC), we return the error leaving the pages in the succeeded regions locked. Technically, this occurs only when @unlock == 0. Otherwise, we unlock the pages in an allocated region after creating an ordered extent. Considering the callers of cow_file_range(unlock=0) won't write out the pages, we can unlock the pages on error exit from cow_file_range(). So, we can ensure all the pages except @locked_page are unlocked on error case. In summary, cow_file_range now behaves like this: - page_started == 1 (return value) - All the pages are unlocked. IO is started. - unlock == 1 - All the pages except @locked_page are unlocked in any case - unlock == 0 - On success, all the pages are locked for writing out them - On failure, all the pages except @locked_page are unlocked | ||||
| CVE-2022-50090 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: replace BTRFS_MAX_EXTENT_SIZE with fs_info->max_extent_size On zoned filesystem, data write out is limited by max_zone_append_size, and a large ordered extent is split according the size of a bio. OTOH, the number of extents to be written is calculated using BTRFS_MAX_EXTENT_SIZE, and that estimated number is used to reserve the metadata bytes to update and/or create the metadata items. The metadata reservation is done at e.g, btrfs_buffered_write() and then released according to the estimation changes. Thus, if the number of extent increases massively, the reserved metadata can run out. The increase of the number of extents easily occurs on zoned filesystem if BTRFS_MAX_EXTENT_SIZE > max_zone_append_size. And, it causes the following warning on a small RAM environment with disabling metadata over-commit (in the following patch). [75721.498492] ------------[ cut here ]------------ [75721.505624] BTRFS: block rsv 1 returned -28 [75721.512230] WARNING: CPU: 24 PID: 2327559 at fs/btrfs/block-rsv.c:537 btrfs_use_block_rsv+0x560/0x760 [btrfs] [75721.581854] CPU: 24 PID: 2327559 Comm: kworker/u64:10 Kdump: loaded Tainted: G W 5.18.0-rc2-BTRFS-ZNS+ #109 [75721.597200] Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.0 02/22/2021 [75721.607310] Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] [75721.616209] RIP: 0010:btrfs_use_block_rsv+0x560/0x760 [btrfs] [75721.646649] RSP: 0018:ffffc9000fbdf3e0 EFLAGS: 00010286 [75721.654126] RAX: 0000000000000000 RBX: 0000000000004000 RCX: 0000000000000000 [75721.663524] RDX: 0000000000000004 RSI: 0000000000000008 RDI: fffff52001f7be6e [75721.672921] RBP: ffffc9000fbdf420 R08: 0000000000000001 R09: ffff889f8d1fc6c7 [75721.682493] R10: ffffed13f1a3f8d8 R11: 0000000000000001 R12: ffff88980a3c0e28 [75721.692284] R13: ffff889b66590000 R14: ffff88980a3c0e40 R15: ffff88980a3c0e8a [75721.701878] FS: 0000000000000000(0000) GS:ffff889f8d000000(0000) knlGS:0000000000000000 [75721.712601] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [75721.720726] CR2: 000055d12e05c018 CR3: 0000800193594000 CR4: 0000000000350ee0 [75721.730499] Call Trace: [75721.735166] <TASK> [75721.739886] btrfs_alloc_tree_block+0x1e1/0x1100 [btrfs] [75721.747545] ? btrfs_alloc_logged_file_extent+0x550/0x550 [btrfs] [75721.756145] ? btrfs_get_32+0xea/0x2d0 [btrfs] [75721.762852] ? btrfs_get_32+0xea/0x2d0 [btrfs] [75721.769520] ? push_leaf_left+0x420/0x620 [btrfs] [75721.776431] ? memcpy+0x4e/0x60 [75721.781931] split_leaf+0x433/0x12d0 [btrfs] [75721.788392] ? btrfs_get_token_32+0x580/0x580 [btrfs] [75721.795636] ? push_for_double_split.isra.0+0x420/0x420 [btrfs] [75721.803759] ? leaf_space_used+0x15d/0x1a0 [btrfs] [75721.811156] btrfs_search_slot+0x1bc3/0x2790 [btrfs] [75721.818300] ? lock_downgrade+0x7c0/0x7c0 [75721.824411] ? free_extent_buffer.part.0+0x107/0x200 [btrfs] [75721.832456] ? split_leaf+0x12d0/0x12d0 [btrfs] [75721.839149] ? free_extent_buffer.part.0+0x14f/0x200 [btrfs] [75721.846945] ? free_extent_buffer+0x13/0x20 [btrfs] [75721.853960] ? btrfs_release_path+0x4b/0x190 [btrfs] [75721.861429] btrfs_csum_file_blocks+0x85c/0x1500 [btrfs] [75721.869313] ? rcu_read_lock_sched_held+0x16/0x80 [75721.876085] ? lock_release+0x552/0xf80 [75721.881957] ? btrfs_del_csums+0x8c0/0x8c0 [btrfs] [75721.888886] ? __kasan_check_write+0x14/0x20 [75721.895152] ? do_raw_read_unlock+0x44/0x80 [75721.901323] ? _raw_write_lock_irq+0x60/0x80 [75721.907983] ? btrfs_global_root+0xb9/0xe0 [btrfs] [75721.915166] ? btrfs_csum_root+0x12b/0x180 [btrfs] [75721.921918] ? btrfs_get_global_root+0x820/0x820 [btrfs] [75721.929166] ? _raw_write_unlock+0x23/0x40 [75721.935116] ? unpin_extent_cache+0x1e3/0x390 [btrfs] [75721.942041] btrfs_finish_ordered_io.isra.0+0xa0c/0x1dc0 [btrfs] [75721.949906] ? try_to_wake_up+0x30/0x14a0 [75721.955700] ? btrfs_unlink_subvol+0xda0/0xda0 [btrfs] [75721.962661] ? rcu ---truncated--- | ||||