Filtered by vendor Linux
Subscriptions
Total
16299 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50187 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ath11k: fix netdev open race Make sure to allocate resources needed before registering the device. This specifically avoids having a racing open() trigger a BUG_ON() in mod_timer() when ath11k_mac_op_start() is called before the mon_reap_timer as been set up. I did not see this issue with next-20220310, but I hit it on every probe with next-20220511. Perhaps some timing changed in between. Here's the backtrace: [ 51.346947] kernel BUG at kernel/time/timer.c:990! [ 51.346958] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ... [ 51.578225] Call trace: [ 51.583293] __mod_timer+0x298/0x390 [ 51.589518] mod_timer+0x14/0x20 [ 51.595368] ath11k_mac_op_start+0x41c/0x4a0 [ath11k] [ 51.603165] drv_start+0x38/0x60 [mac80211] [ 51.610110] ieee80211_do_open+0x29c/0x7d0 [mac80211] [ 51.617945] ieee80211_open+0x60/0xb0 [mac80211] [ 51.625311] __dev_open+0x100/0x1c0 [ 51.631420] __dev_change_flags+0x194/0x210 [ 51.638214] dev_change_flags+0x24/0x70 [ 51.644646] do_setlink+0x228/0xdb0 [ 51.650723] __rtnl_newlink+0x460/0x830 [ 51.657162] rtnl_newlink+0x4c/0x80 [ 51.663229] rtnetlink_rcv_msg+0x124/0x390 [ 51.669917] netlink_rcv_skb+0x58/0x130 [ 51.676314] rtnetlink_rcv+0x18/0x30 [ 51.682460] netlink_unicast+0x250/0x310 [ 51.688960] netlink_sendmsg+0x19c/0x3e0 [ 51.695458] ____sys_sendmsg+0x220/0x290 [ 51.701938] ___sys_sendmsg+0x7c/0xc0 [ 51.708148] __sys_sendmsg+0x68/0xd0 [ 51.714254] __arm64_sys_sendmsg+0x28/0x40 [ 51.720900] invoke_syscall+0x48/0x120 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 | ||||
| CVE-2022-50188 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/meson: Fix refcount leak in meson_encoder_hdmi_init of_find_device_by_node() takes reference, we should use put_device() to release it when not need anymore. Add missing put_device() in error path to avoid refcount leak. | ||||
| CVE-2022-50190 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: Fix simplification of devm_spi_register_controller This reverts commit 59ebbe40fb51 ("spi: simplify devm_spi_register_controller"). If devm_add_action() fails in devm_add_action_or_reset(), devm_spi_unregister() will be called, it decreases the refcount of 'ctlr->dev' to 0, then it will cause uaf in the drivers that calling spi_put_controller() in error path. | ||||
| CVE-2022-50191 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: of: Fix refcount leak bug in of_get_regulation_constraints() We should call the of_node_put() for the reference returned by of_get_child_by_name() which has increased the refcount. | ||||
| CVE-2022-50192 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: tegra20-slink: fix UAF in tegra_slink_remove() After calling spi_unregister_master(), the refcount of master will be decrease to 0, and it will be freed in spi_controller_release(), the device data also will be freed, so it will lead a UAF when using 'tspi'. To fix this, get the master before unregister and put it when finish using it. | ||||
| CVE-2022-50193 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: erofs: wake up all waiters after z_erofs_lzma_head ready When the user mounts the erofs second times, the decompression thread may hung. The problem happens due to a sequence of steps like the following: 1) Task A called z_erofs_load_lzma_config which obtain all of the node from the z_erofs_lzma_head. 2) At this time, task B called the z_erofs_lzma_decompress and wanted to get a node. But the z_erofs_lzma_head was empty, the Task B had to sleep. 3) Task A release nodes and push nodes into the z_erofs_lzma_head. But task B was still sleeping. One example report when the hung happens: task:kworker/u3:1 state:D stack:14384 pid: 86 ppid: 2 flags:0x00004000 Workqueue: erofs_unzipd z_erofs_decompressqueue_work Call Trace: <TASK> __schedule+0x281/0x760 schedule+0x49/0xb0 z_erofs_lzma_decompress+0x4bc/0x580 ? cpu_core_flags+0x10/0x10 z_erofs_decompress_pcluster+0x49b/0xba0 ? __update_load_avg_se+0x2b0/0x330 ? __update_load_avg_se+0x2b0/0x330 ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? set_next_entity+0xbd/0x110 ? _raw_spin_unlock+0xd/0x20 z_erofs_decompress_queue.isra.0+0x2e/0x50 z_erofs_decompressqueue_work+0x30/0x60 process_one_work+0x1d3/0x3a0 worker_thread+0x45/0x3a0 ? process_one_work+0x3a0/0x3a0 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> | ||||
| CVE-2022-50194 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: qcom: aoss: Fix refcount leak in qmp_cooling_devices_register Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node. When breaking early from a for_each_available_child_of_node() loop, we need to explicitly call of_node_put() on the child node. Add missing of_node_put() to avoid refcount leak. | ||||
| CVE-2022-50195 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ARM: dts: qcom: replace gcc PXO with pxo_board fixed clock Replace gcc PXO phandle to pxo_board fixed clock declared in the dts. gcc driver doesn't provide PXO_SRC as it's a fixed-clock. This cause a kernel panic if any driver actually try to use it. | ||||
| CVE-2022-50196 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: qcom: ocmem: Fix refcount leak in of_get_ocmem of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. of_node_put() will check NULL pointer. | ||||
| CVE-2022-50197 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: zynq: Fix refcount leak in zynq_get_revision of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. | ||||
| CVE-2022-50198 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ARM: OMAP2+: Fix refcount leak in omap3xxx_prm_late_init of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. | ||||
| CVE-2022-50199 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ARM: OMAP2+: Fix refcount leak in omapdss_init_of omapdss_find_dss_of_node() calls of_find_compatible_node() to get device node. of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() in later error path and normal path. | ||||
| CVE-2022-50200 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: selinux: Add boundary check in put_entry() Just like next_entry(), boundary check is necessary to prevent memory out-of-bound access. | ||||
| CVE-2022-50201 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: selinux: fix memleak in security_read_state_kernel() In this function, it directly returns the result of __security_read_policy without freeing the allocated memory in *data, cause memory leak issue, so free the memory if __security_read_policy failed. [PM: subject line tweak] | ||||
| CVE-2022-50207 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ARM: bcm: Fix refcount leak in bcm_kona_smc_init of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. | ||||
| CVE-2025-38525 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix irq-disabled in local_bh_enable() The rxrpc_assess_MTU_size() function calls down into the IP layer to find out the MTU size for a route. When accepting an incoming call, this is called from rxrpc_new_incoming_call() which holds interrupts disabled across the code that calls down to it. Unfortunately, the IP layer uses local_bh_enable() which, config dependent, throws a warning if IRQs are enabled: WARNING: CPU: 1 PID: 5544 at kernel/softirq.c:387 __local_bh_enable_ip+0x43/0xd0 ... RIP: 0010:__local_bh_enable_ip+0x43/0xd0 ... Call Trace: <TASK> rt_cache_route+0x7e/0xa0 rt_set_nexthop.isra.0+0x3b3/0x3f0 __mkroute_output+0x43a/0x460 ip_route_output_key_hash+0xf7/0x140 ip_route_output_flow+0x1b/0x90 rxrpc_assess_MTU_size.isra.0+0x2a0/0x590 rxrpc_new_incoming_peer+0x46/0x120 rxrpc_alloc_incoming_call+0x1b1/0x400 rxrpc_new_incoming_call+0x1da/0x5e0 rxrpc_input_packet+0x827/0x900 rxrpc_io_thread+0x403/0xb60 kthread+0x2f7/0x310 ret_from_fork+0x2a/0x230 ret_from_fork_asm+0x1a/0x30 ... hardirqs last enabled at (23): _raw_spin_unlock_irq+0x24/0x50 hardirqs last disabled at (24): _raw_read_lock_irq+0x17/0x70 softirqs last enabled at (0): copy_process+0xc61/0x2730 softirqs last disabled at (25): rt_add_uncached_list+0x3c/0x90 Fix this by moving the call to rxrpc_assess_MTU_size() out of rxrpc_init_peer() and further up the stack where it can be done without interrupts disabled. It shouldn't be a problem for rxrpc_new_incoming_call() to do it after the locks are dropped as pmtud is going to be performed by the I/O thread - and we're in the I/O thread at this point. | ||||
| CVE-2025-38524 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix recv-recv race of completed call If a call receives an event (such as incoming data), the call gets placed on the socket's queue and a thread in recvmsg can be awakened to go and process it. Once the thread has picked up the call off of the queue, further events will cause it to be requeued, and once the socket lock is dropped (recvmsg uses call->user_mutex to allow the socket to be used in parallel), a second thread can come in and its recvmsg can pop the call off the socket queue again. In such a case, the first thread will be receiving stuff from the call and the second thread will be blocked on call->user_mutex. The first thread can, at this point, process both the event that it picked call for and the event that the second thread picked the call for and may see the call terminate - in which case the call will be "released", decoupling the call from the user call ID assigned to it (RXRPC_USER_CALL_ID in the control message). The first thread will return okay, but then the second thread will wake up holding the user_mutex and, if it sees that the call has been released by the first thread, it will BUG thusly: kernel BUG at net/rxrpc/recvmsg.c:474! Fix this by just dequeuing the call and ignoring it if it is seen to be already released. We can't tell userspace about it anyway as the user call ID has become stale. | ||||
| CVE-2025-38523 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: Fix the smbd_response slab to allow usercopy The handling of received data in the smbdirect client code involves using copy_to_iter() to copy data from the smbd_reponse struct's packet trailer to a folioq buffer provided by netfslib that encapsulates a chunk of pagecache. If, however, CONFIG_HARDENED_USERCOPY=y, this will result in the checks then performed in copy_to_iter() oopsing with something like the following: CIFS: Attempting to mount //172.31.9.1/test CIFS: VFS: RDMA transport established usercopy: Kernel memory exposure attempt detected from SLUB object 'smbd_response_0000000091e24ea1' (offset 81, size 63)! ------------[ cut here ]------------ kernel BUG at mm/usercopy.c:102! ... RIP: 0010:usercopy_abort+0x6c/0x80 ... Call Trace: <TASK> __check_heap_object+0xe3/0x120 __check_object_size+0x4dc/0x6d0 smbd_recv+0x77f/0xfe0 [cifs] cifs_readv_from_socket+0x276/0x8f0 [cifs] cifs_read_from_socket+0xcd/0x120 [cifs] cifs_demultiplex_thread+0x7e9/0x2d50 [cifs] kthread+0x396/0x830 ret_from_fork+0x2b8/0x3b0 ret_from_fork_asm+0x1a/0x30 The problem is that the smbd_response slab's packet field isn't marked as being permitted for usercopy. Fix this by passing parameters to kmem_slab_create() to indicate that copy_to_iter() is permitted from the packet region of the smbd_response slab objects, less the header space. | ||||
| CVE-2025-38522 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched/ext: Prevent update_locked_rq() calls with NULL rq Avoid invoking update_locked_rq() when the runqueue (rq) pointer is NULL in the SCX_CALL_OP and SCX_CALL_OP_RET macros. Previously, calling update_locked_rq(NULL) with preemption enabled could trigger the following warning: BUG: using __this_cpu_write() in preemptible [00000000] This happens because __this_cpu_write() is unsafe to use in preemptible context. rq is NULL when an ops invoked from an unlocked context. In such cases, we don't need to store any rq, since the value should already be NULL (unlocked). Ensure that update_locked_rq() is only called when rq is non-NULL, preventing calling __this_cpu_write() on preemptible context. | ||||
| CVE-2025-38519 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon: fix divide by zero in damon_get_intervals_score() The current implementation allows having zero size regions with no special reasons, but damon_get_intervals_score() gets crashed by divide by zero when the region size is zero. [ 29.403950] Oops: divide error: 0000 [#1] SMP NOPTI This patch fixes the bug, but does not disallow zero size regions to keep the backward compatibility since disallowing zero size regions might be a breaking change for some users. In addition, the same crash can happen when intervals_goal.access_bp is zero so this should be fixed in stable trees as well. | ||||