Filtered by vendor Linux
Subscriptions
Total
16299 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38628 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: Fix release of uninitialized resources on error path The commit in the fixes tag made sure that mlx5_vdpa_free() is the single entrypoint for removing the vdpa device resources added in mlx5_vdpa_dev_add(), even in the cleanup path of mlx5_vdpa_dev_add(). This means that all functions from mlx5_vdpa_free() should be able to handle uninitialized resources. This was not the case though: mlx5_vdpa_destroy_mr_resources() and mlx5_cmd_cleanup_async_ctx() were not able to do so. This caused the splat below when adding a vdpa device without a MAC address. This patch fixes these remaining issues: - Makes mlx5_vdpa_destroy_mr_resources() return early if called on uninitialized resources. - Moves mlx5_cmd_init_async_ctx() early on during device addition because it can't fail. This means that mlx5_cmd_cleanup_async_ctx() also can't fail. To mirror this, move the call site of mlx5_cmd_cleanup_async_ctx() in mlx5_vdpa_free(). An additional comment was added in mlx5_vdpa_free() to document the expectations of functions called from this context. Splat: mlx5_core 0000:b5:03.2: mlx5_vdpa_dev_add:3950:(pid 2306) warning: No mac address provisioned? ------------[ cut here ]------------ WARNING: CPU: 13 PID: 2306 at kernel/workqueue.c:4207 __flush_work+0x9a/0xb0 [...] Call Trace: <TASK> ? __try_to_del_timer_sync+0x61/0x90 ? __timer_delete_sync+0x2b/0x40 mlx5_vdpa_destroy_mr_resources+0x1c/0x40 [mlx5_vdpa] mlx5_vdpa_free+0x45/0x160 [mlx5_vdpa] vdpa_release_dev+0x1e/0x50 [vdpa] device_release+0x31/0x90 kobject_cleanup+0x37/0x130 mlx5_vdpa_dev_add+0x327/0x890 [mlx5_vdpa] vdpa_nl_cmd_dev_add_set_doit+0x2c1/0x4d0 [vdpa] genl_family_rcv_msg_doit+0xd8/0x130 genl_family_rcv_msg+0x14b/0x220 ? __pfx_vdpa_nl_cmd_dev_add_set_doit+0x10/0x10 [vdpa] genl_rcv_msg+0x47/0xa0 ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x53/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x27b/0x3b0 netlink_sendmsg+0x1f7/0x430 __sys_sendto+0x1fa/0x210 ? ___pte_offset_map+0x17/0x160 ? next_uptodate_folio+0x85/0x2b0 ? percpu_counter_add_batch+0x51/0x90 ? filemap_map_pages+0x515/0x660 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x7b/0x2c0 ? do_read_fault+0x108/0x220 ? do_pte_missing+0x14a/0x3e0 ? __handle_mm_fault+0x321/0x730 ? count_memcg_events+0x13f/0x180 ? handle_mm_fault+0x1fb/0x2d0 ? do_user_addr_fault+0x20c/0x700 ? syscall_exit_work+0x104/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f0c25b0feca [...] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2025-38626 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to trigger foreground gc during f2fs_map_blocks() in lfs mode w/ "mode=lfs" mount option, generic/299 will cause system panic as below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:2835! Call Trace: <TASK> f2fs_allocate_data_block+0x6f4/0xc50 f2fs_map_blocks+0x970/0x1550 f2fs_iomap_begin+0xb2/0x1e0 iomap_iter+0x1d6/0x430 __iomap_dio_rw+0x208/0x9a0 f2fs_file_write_iter+0x6b3/0xfa0 aio_write+0x15d/0x2e0 io_submit_one+0x55e/0xab0 __x64_sys_io_submit+0xa5/0x230 do_syscall_64+0x84/0x2f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0010:new_curseg+0x70f/0x720 The root cause of we run out-of-space is: in f2fs_map_blocks(), f2fs may trigger foreground gc only if it allocates any physical block, it will be a little bit later when there is multiple threads writing data w/ aio/dio/bufio method in parallel, since we always use OPU in lfs mode, so f2fs_map_blocks() does block allocations aggressively. In order to fix this issue, let's give a chance to trigger foreground gc in prior to block allocation in f2fs_map_blocks(). | ||||
| CVE-2025-38625 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfio/pds: Fix missing detach_ioas op When CONFIG_IOMMUFD is enabled and a device is bound to the pds_vfio_pci driver, the following WARN_ON() trace is seen and probe fails: WARNING: CPU: 0 PID: 5040 at drivers/vfio/vfio_main.c:317 __vfio_register_dev+0x130/0x140 [vfio] <...> pds_vfio_pci 0000:08:00.1: probe with driver pds_vfio_pci failed with error -22 This is because the driver's vfio_device_ops.detach_ioas isn't set. Fix this by using the generic vfio_iommufd_physical_detach_ioas function. | ||||
| CVE-2025-38646 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: avoid NULL dereference when RX problematic packet on unsupported 6 GHz band With a quite rare chance, RX report might be problematic to make SW think a packet is received on 6 GHz band even if the chip does not support 6 GHz band actually. Since SW won't initialize stuffs for unsupported bands, NULL dereference will happen then in the sequence, rtw89_vif_rx_stats_iter() -> rtw89_core_cancel_6ghz_probe_tx(). So, add a check to avoid it. The following is a crash log for this case. BUG: kernel NULL pointer dereference, address: 0000000000000032 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 1907 Comm: irq/131-rtw89_p Tainted: G U 6.6.56-05896-g89f5fb0eb30b #1 (HASH:1400 4) Hardware name: Google Telith/Telith, BIOS Google_Telith.15217.747.0 11/12/2024 RIP: 0010:rtw89_vif_rx_stats_iter+0xd2/0x310 [rtw89_core] Code: 4c 89 7d c8 48 89 55 c0 49 8d 44 24 02 48 89 45 b8 45 31 ff eb 11 41 c6 45 3a 01 41 b7 01 4d 8b 6d 00 4d 39 f5 74 42 8b 43 10 <41> 33 45 32 0f b7 4b 14 66 41 33 4d 36 0f b7 c9 09 c1 74 d8 4d 85 RSP: 0018:ffff9f3080138ca0 EFLAGS: 00010246 RAX: 00000000b8bf5770 RBX: ffff91b5e8c639c0 RCX: 0000000000000011 RDX: ffff91b582de1be8 RSI: 0000000000000000 RDI: ffff91b5e8c639e6 RBP: ffff9f3080138d00 R08: 0000000000000000 R09: 0000000000000000 R10: ffff91b59de70000 R11: ffffffffc069be50 R12: ffff91b5e8c639e4 R13: 0000000000000000 R14: ffff91b5828020b8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff91b8efa40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000032 CR3: 00000002bf838000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <IRQ> ? __die_body+0x68/0xb0 ? page_fault_oops+0x379/0x3e0 ? exc_page_fault+0x4f/0xa0 ? asm_exc_page_fault+0x22/0x30 ? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)] ? rtw89_vif_rx_stats_iter+0xd2/0x310 [rtw89_core (HASH:1400 5)] __iterate_interfaces+0x59/0x110 [mac80211 (HASH:1400 6)] ? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)] ? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)] ieee80211_iterate_active_interfaces_atomic+0x36/0x50 [mac80211 (HASH:1400 6)] rtw89_core_rx_to_mac80211+0xfd/0x1b0 [rtw89_core (HASH:1400 5)] rtw89_core_rx+0x43a/0x980 [rtw89_core (HASH:1400 5)] | ||||
| CVE-2025-38642 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix WARN_ON for monitor mode on some devices On devices without WANT_MONITOR_VIF (and probably without channel context support) we get a WARN_ON for changing the per-link setting of a monitor interface. Since we already skip AP_VLAN interfaces and MONITOR with WANT_MONITOR_VIF and/or NO_VIRTUAL_MONITOR should update the settings, catch this in the link change code instead of the warning. | ||||
| CVE-2025-38641 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: Fix potential NULL dereference on kmalloc failure Avoid potential NULL pointer dereference by checking the return value of kmalloc and handling allocation failure properly. | ||||
| CVE-2025-38640 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Disable migration in nf_hook_run_bpf(). syzbot reported that the netfilter bpf prog can be called without migration disabled in xmit path. Then the assertion in __bpf_prog_run() fails, triggering the splat below. [0] Let's use bpf_prog_run_pin_on_cpu() in nf_hook_run_bpf(). [0]: BUG: assuming non migratable context at ./include/linux/filter.h:703 in_atomic(): 0, irqs_disabled(): 0, migration_disabled() 0 pid: 5829, name: sshd-session 3 locks held by sshd-session/5829: #0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1667 [inline] #0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x20/0x50 net/ipv4/tcp.c:1395 #1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline] #1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline] #1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: __ip_queue_xmit+0x69/0x26c0 net/ipv4/ip_output.c:470 #2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline] #2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline] #2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: nf_hook+0xb2/0x680 include/linux/netfilter.h:241 CPU: 0 UID: 0 PID: 5829 Comm: sshd-session Not tainted 6.16.0-rc6-syzkaller-00002-g155a3c003e55 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120 __cant_migrate kernel/sched/core.c:8860 [inline] __cant_migrate+0x1c7/0x250 kernel/sched/core.c:8834 __bpf_prog_run include/linux/filter.h:703 [inline] bpf_prog_run include/linux/filter.h:725 [inline] nf_hook_run_bpf+0x83/0x1e0 net/netfilter/nf_bpf_link.c:20 nf_hook_entry_hookfn include/linux/netfilter.h:157 [inline] nf_hook_slow+0xbb/0x200 net/netfilter/core.c:623 nf_hook+0x370/0x680 include/linux/netfilter.h:272 NF_HOOK_COND include/linux/netfilter.h:305 [inline] ip_output+0x1bc/0x2a0 net/ipv4/ip_output.c:433 dst_output include/net/dst.h:459 [inline] ip_local_out net/ipv4/ip_output.c:129 [inline] __ip_queue_xmit+0x1d7d/0x26c0 net/ipv4/ip_output.c:527 __tcp_transmit_skb+0x2686/0x3e90 net/ipv4/tcp_output.c:1479 tcp_transmit_skb net/ipv4/tcp_output.c:1497 [inline] tcp_write_xmit+0x1274/0x84e0 net/ipv4/tcp_output.c:2838 __tcp_push_pending_frames+0xaf/0x390 net/ipv4/tcp_output.c:3021 tcp_push+0x225/0x700 net/ipv4/tcp.c:759 tcp_sendmsg_locked+0x1870/0x42b0 net/ipv4/tcp.c:1359 tcp_sendmsg+0x2e/0x50 net/ipv4/tcp.c:1396 inet_sendmsg+0xb9/0x140 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] sock_write_iter+0x4aa/0x5b0 net/socket.c:1131 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x6c7/0x1150 fs/read_write.c:686 ksys_write+0x1f8/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe7d365d407 Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff RSP: | ||||
| CVE-2025-38638 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: add a retry logic in net6_rt_notify() inet6_rt_notify() can be called under RCU protection only. This means the route could be changed concurrently and rt6_fill_node() could return -EMSGSIZE. Re-size the skb when this happens and retry, removing one WARN_ON() that syzbot was able to trigger: WARNING: CPU: 3 PID: 6291 at net/ipv6/route.c:6342 inet6_rt_notify+0x475/0x4b0 net/ipv6/route.c:6342 Modules linked in: CPU: 3 UID: 0 PID: 6291 Comm: syz.0.77 Not tainted 6.16.0-rc7-syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:inet6_rt_notify+0x475/0x4b0 net/ipv6/route.c:6342 Code: fc ff ff e8 6d 52 ea f7 e9 47 fc ff ff 48 8b 7c 24 08 4c 89 04 24 e8 5a 52 ea f7 4c 8b 04 24 e9 94 fd ff ff e8 9c fe 84 f7 90 <0f> 0b 90 e9 bd fd ff ff e8 6e 52 ea f7 e9 bb fb ff ff 48 89 df e8 RSP: 0018:ffffc900035cf1d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffffc900035cf540 RCX: ffffffff8a36e790 RDX: ffff88802f7e8000 RSI: ffffffff8a36e9d4 RDI: 0000000000000005 RBP: ffff88803c230f00 R08: 0000000000000005 R09: 00000000ffffffa6 R10: 00000000ffffffa6 R11: 0000000000000001 R12: 00000000ffffffa6 R13: 0000000000000900 R14: ffff888032ea4100 R15: 0000000000000000 FS: 00007fac7b89a6c0(0000) GS:ffff8880d6a20000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fac7b899f98 CR3: 0000000034b3f000 CR4: 0000000000352ef0 Call Trace: <TASK> ip6_route_mpath_notify+0xde/0x280 net/ipv6/route.c:5356 ip6_route_multipath_add+0x1181/0x1bd0 net/ipv6/route.c:5536 inet6_rtm_newroute+0xe4/0x1a0 net/ipv6/route.c:5647 rtnetlink_rcv_msg+0x95e/0xe90 net/core/rtnetlink.c:6944 netlink_rcv_skb+0x155/0x420 net/netlink/af_netlink.c:2552 netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline] netlink_unicast+0x58d/0x850 net/netlink/af_netlink.c:1346 netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] ____sys_sendmsg+0xa95/0xc70 net/socket.c:2566 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2620 | ||||
| CVE-2025-38659 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: No more self recovery When a node withdraws and it turns out that it is the only node that has the filesystem mounted, gfs2 currently tries to replay the local journal to bring the filesystem back into a consistent state. Not only is that a very bad idea, it has also never worked because gfs2_recover_func() will refuse to do anything during a withdraw. However, before even getting to this point, gfs2_recover_func() dereferences sdp->sd_jdesc->jd_inode. This was a use-after-free before commit 04133b607a78 ("gfs2: Prevent double iput for journal on error") and is a NULL pointer dereference since then. Simply get rid of self recovery to fix that. | ||||
| CVE-2025-38658 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails Have nvmet_req_init() and req->execute() complete failed commands. Description of the problem: nvmet_req_init() calls __nvmet_req_complete() internally upon failure, e.g., unsupported opcode, which calls the "queue_response" callback, this results in nvmet_pci_epf_queue_response() being called, which will call nvmet_pci_epf_complete_iod() if data_len is 0 or if dma_dir is different from DMA_TO_DEVICE. This results in a double completion as nvmet_pci_epf_exec_iod_work() also calls nvmet_pci_epf_complete_iod() when nvmet_req_init() fails. Steps to reproduce: On the host send a command with an unsupported opcode with nvme-cli, For example the admin command "security receive" $ sudo nvme security-recv /dev/nvme0n1 -n1 -x4096 This triggers a double completion as nvmet_req_init() fails and nvmet_pci_epf_queue_response() is called, here iod->dma_dir is still in the default state of "DMA_NONE" as set by default in nvmet_pci_epf_alloc_iod(), so nvmet_pci_epf_complete_iod() is called. Because nvmet_req_init() failed nvmet_pci_epf_complete_iod() is also called in nvmet_pci_epf_exec_iod_work() leading to a double completion. This not only sends two completions to the host but also corrupts the state of the PCI NVMe target leading to kernel oops. This patch lets nvmet_req_init() and req->execute() complete all failed commands, and removes the double completion case in nvmet_pci_epf_exec_iod_work() therefore fixing the edge cases where double completions occurred. | ||||
| CVE-2025-38657 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: mcc: prevent shift wrapping in rtw89_core_mlsr_switch() The "link_id" value comes from the user via debugfs. If it's larger than BITS_PER_LONG then that would result in shift wrapping and potentially an out of bounds access later. In fact, we can limit it to IEEE80211_MLD_MAX_NUM_LINKS (15). Fortunately, only root can write to debugfs files so the security impact is minimal. | ||||
| CVE-2025-38656 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: Fix error code in iwl_op_mode_dvm_start() Preserve the error code if iwl_setup_deferred_work() fails. The current code returns ERR_PTR(0) (which is NULL) on this path. I believe the missing error code potentially leads to a use after free involving debugfs. | ||||
| CVE-2025-38655 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: canaan: k230: add NULL check in DT parse Add a NULL check for the return value of of_get_property() when retrieving the "pinmux" property in the group parser. This avoids a potential NULL pointer dereference if the property is missing from the device tree node. Also fix a typo ("sintenel") in the device ID match table comment, correcting it to "sentinel". | ||||
| CVE-2025-38654 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: canaan: k230: Fix order of DT parse and pinctrl register Move DT parse before pinctrl register. This ensures that device tree parsing is done before calling devm_pinctrl_register() to prevent using uninitialized pin resources. | ||||
| CVE-2025-38651 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: landlock: Fix warning from KUnit tests get_id_range() expects a positive value as first argument but get_random_u8() can return 0. Fix this by clamping it. Validated by running the test in a for loop for 1000 times. Note that MAX() is wrong as it is only supposed to be used for constants, but max() is good here. [..] ok 9 test_range2_rand1 [..] ok 10 test_range2_rand2 [..] ok 11 test_range2_rand15 [..] ------------[ cut here ]------------ [..] WARNING: CPU: 6 PID: 104 at security/landlock/id.c:99 test_range2_rand16 (security/landlock/id.c:99 (discriminator 1) security/landlock/id.c:234 (discriminator 1)) [..] Modules linked in: [..] CPU: 6 UID: 0 PID: 104 Comm: kunit_try_catch Tainted: G N 6.16.0-rc1-dev-00001-g314a2f98b65f #1 PREEMPT(undef) [..] Tainted: [N]=TEST [..] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [..] RIP: 0010:test_range2_rand16 (security/landlock/id.c:99 (discriminator 1) security/landlock/id.c:234 (discriminator 1)) [..] Code: 49 c7 c0 10 70 30 82 4c 89 ff 48 c7 c6 a0 63 1e 83 49 c7 45 a0 e0 63 1e 83 e8 3f 95 17 00 e9 1f ff ff ff 0f 0b e9 df fd ff ff <0f> 0b ba 01 00 00 00 e9 68 fe ff ff 49 89 45 a8 49 8d 4d a0 45 31 [..] RSP: 0000:ffff888104eb7c78 EFLAGS: 00010246 [..] RAX: 0000000000000000 RBX: 000000000870822c RCX: 0000000000000000 ^^^^^^^^^^^^^^^^ [..] [..] Call Trace: [..] [..] ---[ end trace 0000000000000000 ]--- [..] ok 12 test_range2_rand16 [..] # landlock_id: pass:12 fail:0 skip:0 total:12 [..] # Totals: pass:12 fail:0 skip:0 total:12 [..] ok 1 landlock_id [mic: Minor cosmetic improvements] | ||||
| CVE-2025-38649 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: dts: qcom: qcs615: fix a crash issue caused by infinite loop for Coresight An infinite loop has been created by the Coresight devices. When only a source device is enabled, the coresight_find_activated_sysfs_sink function is recursively invoked in an attempt to locate an active sink device, ultimately leading to a stack overflow and system crash. Therefore, disable the replicator1 to break the infinite loop and prevent a potential stack overflow. replicator1_out -> funnel_swao_in6 -> tmc_etf_swao_in -> tmc_etf_swao_out | | replicator1_in replicator_swao_in | | replicator0_out1 replicator_swao_out0 | | replicator0_in funnel_in1_in3 | | tmc_etf_out <- tmc_etf_in <- funnel_merg_out <- funnel_merg_in1 <- funnel_in1_out [call trace] dump_backtrace+0x9c/0x128 show_stack+0x20/0x38 dump_stack_lvl+0x48/0x60 dump_stack+0x18/0x28 panic+0x340/0x3b0 nmi_panic+0x94/0xa0 panic_bad_stack+0x114/0x138 handle_bad_stack+0x34/0xb8 __bad_stack+0x78/0x80 coresight_find_activated_sysfs_sink+0x28/0xa0 [coresight] coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] ... coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] coresight_enable_sysfs+0x80/0x2a0 [coresight] side effect after the change: Only trace data originating from AOSS can reach the ETF_SWAO and EUD sinks. | ||||
| CVE-2025-38648 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: stm32: Check for cfg availability in stm32_spi_probe The stm32_spi_probe function now includes a check to ensure that the pointer returned by of_device_get_match_data is not NULL before accessing its members. This resolves a warning where a potential NULL pointer dereference could occur when accessing cfg->has_device_mode. Before accessing the 'has_device_mode' member, we verify that 'cfg' is not NULL. If 'cfg' is NULL, an error message is logged. This change ensures that the driver does not attempt to access configuration data if it is not available, thus preventing a potential system crash due to a NULL pointer dereference. | ||||
| CVE-2022-50251 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and goto error path which will call mmc_free_host(), besides, the timer added before mmc_add_host() needs be del. And this patch fixes another missing call mmc_free_host() if usb_control_msg() fails. | ||||
| CVE-2025-39762 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: add null check [WHY] Prevents null pointer dereferences to enhance function robustness [HOW] Adds early null check and return false if invalid. | ||||
| CVE-2025-39761 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Decrement TID on RX peer frag setup error handling Currently, TID is not decremented before peer cleanup, during error handling path of ath12k_dp_rx_peer_frag_setup(). This could lead to out-of-bounds access in peer->rx_tid[]. Hence, add a decrement operation for TID, before peer cleanup to ensures proper cleanup and prevents out-of-bounds access issues when the RX peer frag setup fails. Found during code review. Compile tested only. | ||||